Compress::Raw::Bzip2 man page on OpenMandriva

Man page or keyword search:  
man Server   8135 pages
apropos Keyword Search (all sections)
Output format
OpenMandriva logo
[printable version]

Compress::Raw::Bzip2(3User Contributed Perl DocumentatiCompress::Raw::Bzip2(3)

NAME
       Compress::Raw::Bzip2 - Low-Level Interface to bzip2 compression library

SYNOPSIS
	   use Compress::Raw::Bzip2 ;

	   my ($bz, $status) = new Compress::Raw::Bzip2 [OPTS]
	       or die "Cannot create bzip2 object: $bzerno\n";

	   $status = $bz->bzdeflate($input, $output);
	   $status = $bz->bzflush($output);
	   $status = $bz->bzclose($output);

	   my ($bz, $status) = new Compress::Raw::Bunzip2 [OPTS]
	       or die "Cannot create bunzip2 object: $bzerno\n";

	   $status = $bz->bzinflate($input, $output);

	   my $version = Compress::Raw::Bzip2::bzlibversion();

DESCRIPTION
       "Compress::Raw::Bzip2" provides an interface to the in-memory
       compression/uncompression functions from the bzip2 compression library.

       Although the primary purpose for the existence of
       "Compress::Raw::Bzip2" is for use by the	 "IO::Compress::Bzip2" and
       "IO::Compress::Bunzip2" modules, it can be used on its own for simple
       compression/uncompression tasks.

Compression
   ($z, $status) = new Compress::Raw::Bzip2 $appendOutput, $blockSize100k,
       $workfactor;
       Creates a new compression object.

       If successful, it will return the initialised compression object, $z
       and a $status of "BZ_OK" in a list context. In scalar context it
       returns the deflation object, $z, only.

       If not successful, the returned compression object, $z, will be undef
       and $status will hold the a bzip2 error code.

       Below is a list of the valid options:

       $appendOutput
	    Controls whether the compressed data is appended to the output
	    buffer in the "bzdeflate", "bzflush" and "bzclose" methods.

	    Defaults to 1.

       $blockSize100k
	    To quote the bzip2 documentation

		blockSize100k specifies the block size to be used for compression. It
		should be a value between 1 and 9 inclusive, and the actual block size
		used is 100000 x this figure. 9 gives the best compression but takes
		most memory.

	    Defaults to 1.

       $workfactor
	    To quote the bzip2 documentation

		This parameter controls how the compression phase behaves when
		presented with worst case, highly repetitive, input data. If
		compression runs into difficulties caused by repetitive data, the
		library switches from the standard sorting algorithm to a fallback
		algorithm. The fallback is slower than the standard algorithm by
		perhaps a factor of three, but always behaves reasonably, no matter how
		bad the input.

		Lower values of workFactor reduce the amount of effort the standard
		algorithm will expend before resorting to the fallback. You should set
		this parameter carefully; too low, and many inputs will be handled by
		the fallback algorithm and so compress rather slowly, too high, and
		your average-to-worst case compression times can become very large. The
		default value of 30 gives reasonable behaviour over a wide range of
		circumstances.

		Allowable values range from 0 to 250 inclusive. 0 is a special case,
		equivalent to using the default value of 30.

	    Defaults to 0.

   $status = $bz->bzdeflate($input, $output);
       Reads the contents of $input, compresses it and writes the compressed
       data to $output.

       Returns "BZ_RUN_OK" on success and a "bzip2" error code on failure.

       If "appendOutput" is enabled in the constructor for the bzip2 object,
       the compressed data will be appended to $output. If not enabled,
       $output will be truncated before the compressed data is written to it.

   $status = $bz->bzflush($output);
       Flushes any pending compressed data to $output.

       Returns "BZ_RUN_OK" on success and a "bzip2" error code on failure.

   $status = $bz->bzclose($output);
       Terminates the compressed data stream and flushes any pending
       compressed data to $output.

       Returns "BZ_STREAM_END" on success and a "bzip2" error code on failure.

   Example
Uncompression
   ($z, $status) = new Compress::Raw::Bunzip2 $appendOutput, $consumeInput,
       $small, $verbosity, $limitOutput;
       If successful, it will return the initialised uncompression object, $z
       and a $status of "BZ_OK" in a list context. In scalar context it
       returns the deflation object, $z, only.

       If not successful, the returned uncompression object, $z, will be undef
       and $status will hold the a bzip2 error code.

       Below is a list of the valid options:

       $appendOutput
	    Controls whether the compressed data is appended to the output
	    buffer in the "bzinflate", "bzflush" and "bzclose" methods.

	    Defaults to 1.

       $consumeInput
       $small
	    To quote the bzip2 documentation

		If small is nonzero, the library will use an alternative decompression
		algorithm which uses less memory but at the cost of decompressing more
		slowly (roughly speaking, half the speed, but the maximum memory
		requirement drops to around 2300k).

	    Defaults to 0.

       $limitOutput
	    The "LimitOutput" option changes the behavior of the
	    "$i->bzinflate" method so that the amount of memory used by the
	    output buffer can be limited.

	    When "LimitOutput" is used the size of the output buffer used will
	    either be the 16k or the amount of memory already allocated to
	    $output, whichever is larger. Predicting the output size available
	    is tricky, so don't rely on getting an exact output buffer size.

	    When "LimitOutout" is not specified "$i->bzinflate" will use as
	    much memory as it takes to write all the uncompressed data it
	    creates by uncompressing the input buffer.

	    If "LimitOutput" is enabled, the "ConsumeInput" option will also
	    be enabled.

	    This option defaults to false.

       $verbosity
	    This parameter is ignored.

	    Defaults to 0.

   $status = $z->bzinflate($input, $output);
       Uncompresses $input and writes the uncompressed data to $output.

       Returns "BZ_OK" if the uncompression was successful, but the end of the
       compressed data stream has not been reached. Returns "BZ_STREAM_END" on
       successful uncompression and the end of the compression stream has been
       reached.

       If "consumeInput" is enabled in the constructor for the bunzip2 object,
       $input will have all compressed data removed from it after
       uncompression. On "BZ_OK" return this will mean that $input will be an
       empty string; when "BZ_STREAM_END" $input will either be an empty
       string or will contain whatever data immediately followed the
       compressed data stream.

       If "appendOutput" is enabled in the constructor for the bunzip2 object,
       the uncompressed data will be appended to $output. If not enabled,
       $output will be truncated before the uncompressed data is written to
       it.

Misc
   my $version = Compress::Raw::Bzip2::bzlibversion();
       Returns the version of the underlying bzip2 library.

Constants
       The following bzip2 constants are exported by this module

		       BZ_RUN
		       BZ_FLUSH
		       BZ_FINISH

		       BZ_OK
		       BZ_RUN_OK
		       BZ_FLUSH_OK
		       BZ_FINISH_OK
		       BZ_STREAM_END
		       BZ_SEQUENCE_ERROR
		       BZ_PARAM_ERROR
		       BZ_MEM_ERROR
		       BZ_DATA_ERROR
		       BZ_DATA_ERROR_MAGIC
		       BZ_IO_ERROR
		       BZ_UNEXPECTED_EOF
		       BZ_OUTBUFF_FULL
		       BZ_CONFIG_ERROR

SEE ALSO
       Compress::Zlib, IO::Compress::Gzip, IO::Uncompress::Gunzip,
       IO::Compress::Deflate, IO::Uncompress::Inflate,
       IO::Compress::RawDeflate, IO::Uncompress::RawInflate,
       IO::Compress::Bzip2, IO::Uncompress::Bunzip2, IO::Compress::Lzma,
       IO::Uncompress::UnLzma, IO::Compress::Xz, IO::Uncompress::UnXz,
       IO::Compress::Lzop, IO::Uncompress::UnLzop, IO::Compress::Lzf,
       IO::Uncompress::UnLzf, IO::Uncompress::AnyInflate,
       IO::Uncompress::AnyUncompress

       IO::Compress::FAQ

       File::GlobMapper, Archive::Zip, Archive::Tar, IO::Zlib

       The primary site for the bzip2 program is http://www.bzip.org.

       See the module Compress::Bzip2

AUTHOR
       This module was written by Paul Marquess, pmqs@cpan.org.

MODIFICATION HISTORY
       See the Changes file.

COPYRIGHT AND LICENSE
       Copyright (c) 2005-2013 Paul Marquess. All rights reserved.

       This program is free software; you can redistribute it and/or modify it
       under the same terms as Perl itself.

perl v5.16.3			  2013-01-07	       Compress::Raw::Bzip2(3)
[top]

List of man pages available for OpenMandriva

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net