DTREVC man page on IRIX

Man page or keyword search:  
man Server   31559 pages
apropos Keyword Search (all sections)
Output format
IRIX logo
[printable version]



DTREVC(3F)							    DTREVC(3F)

NAME
     DTREVC - compute some or all of the right and/or left eigenvectors of a
     real upper quasi-triangular matrix T

SYNOPSIS
     SUBROUTINE DTREVC( SIDE, HOWMNY, SELECT, N, T, LDT, VL, LDVL, VR, LDVR,
			MM, M, WORK, INFO )

	 CHARACTER	HOWMNY, SIDE

	 INTEGER	INFO, LDT, LDVL, LDVR, M, MM, N

	 LOGICAL	SELECT( * )

	 DOUBLE		PRECISION T( LDT, * ), VL( LDVL, * ), VR( LDVR, * ),
			WORK( * )

PURPOSE
     DTREVC computes some or all of the right and/or left eigenvectors of a
     real upper quasi-triangular matrix T.

     The right eigenvector x and the left eigenvector y of T corresponding to
     an eigenvalue w are defined by:

		  T*x = w*x,	 y'*T = w*y'

     where y' denotes the conjugate transpose of the vector y.

     If all eigenvectors are requested, the routine may either return the
     matrices X and/or Y of right or left eigenvectors of T, or the products
     Q*X and/or Q*Y, where Q is an input orthogonal
     matrix. If T was obtained from the real-Schur factorization of an
     original matrix A = Q*T*Q', then Q*X and Q*Y are the matrices of right or
     left eigenvectors of A.

     T must be in Schur canonical form (as returned by DHSEQR), that is, block
     upper triangular with 1-by-1 and 2-by-2 diagonal blocks; each 2-by-2
     diagonal block has its diagonal elements equal and its off-diagonal
     elements of opposite sign.	 Corresponding to each 2-by-2 diagonal block
     is a complex conjugate pair of eigenvalues and eigenvectors; only one
     eigenvector of the pair is computed, namely the one corresponding to the
     eigenvalue with positive imaginary part.

ARGUMENTS
     SIDE    (input) CHARACTER*1
	     = 'R':  compute right eigenvectors only;
	     = 'L':  compute left eigenvectors only;
	     = 'B':  compute both right and left eigenvectors.

									Page 1

DTREVC(3F)							    DTREVC(3F)

     HOWMNY  (input) CHARACTER*1
	     = 'A':  compute all right and/or left eigenvectors;
	     = 'B':  compute all right and/or left eigenvectors, and
	     backtransform them using the input matrices supplied in VR and/or
	     VL; = 'S':	 compute selected right and/or left eigenvectors,
	     specified by the logical array SELECT.

     SELECT  (input/output) LOGICAL array, dimension (N)
	     If HOWMNY = 'S', SELECT specifies the eigenvectors to be
	     computed.	If HOWMNY = 'A' or 'B', SELECT is not referenced.  To
	     select the real eigenvector corresponding to a real eigenvalue
	     w(j), SELECT(j) must be set to .TRUE..  To select the complex
	     eigenvector corresponding to a complex conjugate pair w(j) and
	     w(j+1), either SELECT(j) or SELECT(j+1) must be set to .TRUE.;
	     then on exit SELECT(j) is .TRUE. and SELECT(j+1) is .FALSE..

     N	     (input) INTEGER
	     The order of the matrix T. N >= 0.

     T	     (input) DOUBLE PRECISION array, dimension (LDT,N)
	     The upper quasi-triangular matrix T in Schur canonical form.

     LDT     (input) INTEGER
	     The leading dimension of the array T. LDT >= max(1,N).

     VL	     (input/output) DOUBLE PRECISION array, dimension (LDVL,MM)
	     On entry, if SIDE = 'L' or 'B' and HOWMNY = 'B', VL must contain
	     an N-by-N matrix Q (usually the orthogonal matrix Q of Schur
	     vectors returned by DHSEQR).  On exit, if SIDE = 'L' or 'B', VL
	     contains:	if HOWMNY = 'A', the matrix Y of left eigenvectors of
	     T; if HOWMNY = 'B', the matrix Q*Y; if HOWMNY = 'S', the left
	     eigenvectors of T specified by SELECT, stored consecutively in
	     the columns of VL, in the same order as their eigenvalues.	 A
	     complex eigenvector corresponding to a complex eigenvalue is
	     stored in two consecutive columns, the first holding the real
	     part, and the second the imaginary part.  If SIDE = 'R', VL is
	     not referenced.

     LDVL    (input) INTEGER
	     The leading dimension of the array VL.  LDVL >= max(1,N) if SIDE
	     = 'L' or 'B'; LDVL >= 1 otherwise.

     VR	     (input/output) DOUBLE PRECISION array, dimension (LDVR,MM)
	     On entry, if SIDE = 'R' or 'B' and HOWMNY = 'B', VR must contain
	     an N-by-N matrix Q (usually the orthogonal matrix Q of Schur
	     vectors returned by DHSEQR).  On exit, if SIDE = 'R' or 'B', VR
	     contains:	if HOWMNY = 'A', the matrix X of right eigenvectors of
	     T; if HOWMNY = 'B', the matrix Q*X; if HOWMNY = 'S', the right
	     eigenvectors of T specified by SELECT, stored consecutively in
	     the columns of VR, in the same order as their eigenvalues.	 A
	     complex eigenvector corresponding to a complex eigenvalue is
	     stored in two consecutive columns, the first holding the real

									Page 2

DTREVC(3F)							    DTREVC(3F)

	     part and the second the imaginary part.  If SIDE = 'L', VR is not
	     referenced.

     LDVR    (input) INTEGER
	     The leading dimension of the array VR.  LDVR >= max(1,N) if SIDE
	     = 'R' or 'B'; LDVR >= 1 otherwise.

     MM	     (input) INTEGER
	     The number of columns in the arrays VL and/or VR. MM >= M.

     M	     (output) INTEGER
	     The number of columns in the arrays VL and/or VR actually used to
	     store the eigenvectors.  If HOWMNY = 'A' or 'B', M is set to N.
	     Each selected real eigenvector occupies one column and each
	     selected complex eigenvector occupies two columns.

     WORK    (workspace) DOUBLE PRECISION array, dimension (3*N)

     INFO    (output) INTEGER
	     = 0:  successful exit
	     < 0:  if INFO = -i, the i-th argument had an illegal value

FURTHER DETAILS
     The algorithm used in this program is basically backward (forward)
     substitution, with scaling to make the the code robust against possible
     overflow.

     Each eigenvector is normalized so that the element of largest magnitude
     has magnitude 1; here the magnitude of a complex number (x,y) is taken to
     be |x| + |y|.

									Page 3

[top]

List of man pages available for IRIX

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net