ExtUtils::MakeMaker man page on Manjaro

Man page or keyword search:  
man Server   11224 pages
apropos Keyword Search (all sections)
Output format
Manjaro logo
[printable version]

ExtUtils::MakeMaker(3pePerl Programmers Reference GuExtUtils::MakeMaker(3perl)

NAME
       ExtUtils::MakeMaker - Create a module Makefile

SYNOPSIS
	 use ExtUtils::MakeMaker;

	 WriteMakefile(
	     NAME	       => "Foo::Bar",
	     VERSION_FROM      => "lib/Foo/Bar.pm",
	 );

DESCRIPTION
       This utility is designed to write a Makefile for an extension module
       from a Makefile.PL. It is based on the Makefile.SH model provided by
       Andy Dougherty and the perl5-porters.

       It splits the task of generating the Makefile into several subroutines
       that can be individually overridden.  Each subroutine returns the text
       it wishes to have written to the Makefile.

       As there are various Make programs with incompatible syntax, which use
       operating system shells, again with incompatible syntax, it is
       important for users of this module to know which flavour of Make a
       Makefile has been written for so they'll use the correct one and won't
       have to face the possibly bewildering errors resulting from using the
       wrong one.

       On POSIX systems, that program will likely be GNU Make; on Microsoft
       Windows, it will be either Microsoft NMake or DMake. Note that this
       module does not support generating Makefiles for GNU Make on Windows.
       See the section on the "MAKE" parameter for details.

       MakeMaker is object oriented. Each directory below the current
       directory that contains a Makefile.PL is treated as a separate object.
       This makes it possible to write an unlimited number of Makefiles with a
       single invocation of WriteMakefile().

   How To Write A Makefile.PL
       See ExtUtils::MakeMaker::Tutorial.

       The long answer is the rest of the manpage :-)

   Default Makefile Behaviour
       The generated Makefile enables the user of the extension to invoke

	 perl Makefile.PL # optionally "perl Makefile.PL verbose"
	 make
	 make test	  # optionally set TEST_VERBOSE=1
	 make install	  # See below

       The Makefile to be produced may be altered by adding arguments of the
       form "KEY=VALUE". E.g.

	 perl Makefile.PL INSTALL_BASE=~

       Other interesting targets in the generated Makefile are

	 make config	 # to check if the Makefile is up-to-date
	 make clean	 # delete local temp files (Makefile gets renamed)
	 make realclean	 # delete derived files (including ./blib)
	 make ci	 # check in all the files in the MANIFEST file
	 make dist	 # see below the Distribution Support section

   make test
       MakeMaker checks for the existence of a file named test.pl in the
       current directory, and if it exists it executes the script with the
       proper set of perl "-I" options.

       MakeMaker also checks for any files matching glob("t/*.t"). It will
       execute all matching files in alphabetical order via the Test::Harness
       module with the "-I" switches set correctly.

       If you'd like to see the raw output of your tests, set the
       "TEST_VERBOSE" variable to true.

	 make test TEST_VERBOSE=1

   make testdb
       A useful variation of the above is the target "testdb". It runs the
       test under the Perl debugger (see perldebug). If the file test.pl
       exists in the current directory, it is used for the test.

       If you want to debug some other testfile, set the "TEST_FILE" variable
       thusly:

	 make testdb TEST_FILE=t/mytest.t

       By default the debugger is called using "-d" option to perl. If you
       want to specify some other option, set the "TESTDB_SW" variable:

	 make testdb TESTDB_SW=-Dx

   make install
       make alone puts all relevant files into directories that are named by
       the macros INST_LIB, INST_ARCHLIB, INST_SCRIPT, INST_MAN1DIR and
       INST_MAN3DIR.  All these default to something below ./blib if you are
       not building below the perl source directory. If you are building below
       the perl source, INST_LIB and INST_ARCHLIB default to ../../lib, and
       INST_SCRIPT is not defined.

       The install target of the generated Makefile copies the files found
       below each of the INST_* directories to their INSTALL* counterparts.
       Which counterparts are chosen depends on the setting of INSTALLDIRS
       according to the following table:

					INSTALLDIRS set to
				  perl	      site	    vendor

			PERLPREFIX	SITEPREFIX	    VENDORPREFIX
	 INST_ARCHLIB	INSTALLARCHLIB	INSTALLSITEARCH	    INSTALLVENDORARCH
	 INST_LIB	INSTALLPRIVLIB	INSTALLSITELIB	    INSTALLVENDORLIB
	 INST_BIN	INSTALLBIN	INSTALLSITEBIN	    INSTALLVENDORBIN
	 INST_SCRIPT	INSTALLSCRIPT	INSTALLSITESCRIPT   INSTALLVENDORSCRIPT
	 INST_MAN1DIR	INSTALLMAN1DIR	INSTALLSITEMAN1DIR  INSTALLVENDORMAN1DIR
	 INST_MAN3DIR	INSTALLMAN3DIR	INSTALLSITEMAN3DIR  INSTALLVENDORMAN3DIR

       The INSTALL... macros in turn default to their %Config
       ($Config{installprivlib}, $Config{installarchlib}, etc.) counterparts.

       You can check the values of these variables on your system with

	   perl '-V:install.*'

       And to check the sequence in which the library directories are searched
       by perl, run

	   perl -le 'print join $/, @INC'

       Sometimes older versions of the module you're installing live in other
       directories in @INC.  Because Perl loads the first version of a module
       it finds, not the newest, you might accidentally get one of these older
       versions even after installing a brand new version.  To delete all
       other versions of the module you're installing (not simply older ones)
       set the "UNINST" variable.

	   make install UNINST=1

   INSTALL_BASE
       INSTALL_BASE can be passed into Makefile.PL to change where your module
       will be installed.  INSTALL_BASE is more like what everyone else calls
       "prefix" than PREFIX is.

       To have everything installed in your home directory, do the following.

	   # Unix users, INSTALL_BASE=~ works fine
	   perl Makefile.PL INSTALL_BASE=/path/to/your/home/dir

       Like PREFIX, it sets several INSTALL* attributes at once.  Unlike
       PREFIX it is easy to predict where the module will end up.  The
       installation pattern looks like this:

	   INSTALLARCHLIB     INSTALL_BASE/lib/perl5/$Config{archname}
	   INSTALLPRIVLIB     INSTALL_BASE/lib/perl5
	   INSTALLBIN	      INSTALL_BASE/bin
	   INSTALLSCRIPT      INSTALL_BASE/bin
	   INSTALLMAN1DIR     INSTALL_BASE/man/man1
	   INSTALLMAN3DIR     INSTALL_BASE/man/man3

       INSTALL_BASE in MakeMaker and "--install_base" in Module::Build (as of
       0.28) install to the same location.  If you want MakeMaker and
       Module::Build to install to the same location simply set INSTALL_BASE
       and "--install_base" to the same location.

       INSTALL_BASE was added in 6.31.

   PREFIX and LIB attribute
       PREFIX and LIB can be used to set several INSTALL* attributes in one
       go.  Here's an example for installing into your home directory.

	   # Unix users, PREFIX=~ works fine
	   perl Makefile.PL PREFIX=/path/to/your/home/dir

       This will install all files in the module under your home directory,
       with man pages and libraries going into an appropriate place (usually
       ~/man and ~/lib).  How the exact location is determined is complicated
       and depends on how your Perl was configured.  INSTALL_BASE works more
       like what other build systems call "prefix" than PREFIX and we
       recommend you use that instead.

       Another way to specify many INSTALL directories with a single parameter
       is LIB.

	   perl Makefile.PL LIB=~/lib

       This will install the module's architecture-independent files into
       ~/lib, the architecture-dependent files into ~/lib/$archname.

       Note, that in both cases the tilde expansion is done by MakeMaker, not
       by perl by default, nor by make.

       Conflicts between parameters LIB, PREFIX and the various INSTALL*
       arguments are resolved so that:

       ·   setting LIB overrides any setting of INSTALLPRIVLIB,
	   INSTALLARCHLIB, INSTALLSITELIB, INSTALLSITEARCH (and they are not
	   affected by PREFIX);

       ·   without LIB, setting PREFIX replaces the initial $Config{prefix}
	   part of those INSTALL* arguments, even if the latter are explicitly
	   set (but are set to still start with $Config{prefix}).

       If the user has superuser privileges, and is not working on AFS or
       relatives, then the defaults for INSTALLPRIVLIB, INSTALLARCHLIB,
       INSTALLSCRIPT, etc. will be appropriate, and this incantation will be
       the best:

	   perl Makefile.PL;
	   make;
	   make test
	   make install

       make install by default writes some documentation of what has been done
       into the file "$(INSTALLARCHLIB)/perllocal.pod". This feature can be
       bypassed by calling make pure_install.

   AFS users
       will have to specify the installation directories as these most
       probably have changed since perl itself has been installed. They will
       have to do this by calling

	   perl Makefile.PL INSTALLSITELIB=/afs/here/today \
	       INSTALLSCRIPT=/afs/there/now INSTALLMAN3DIR=/afs/for/manpages
	   make

       Be careful to repeat this procedure every time you recompile an
       extension, unless you are sure the AFS installation directories are
       still valid.

   Static Linking of a new Perl Binary
       An extension that is built with the above steps is ready to use on
       systems supporting dynamic loading. On systems that do not support
       dynamic loading, any newly created extension has to be linked together
       with the available resources. MakeMaker supports the linking process by
       creating appropriate targets in the Makefile whenever an extension is
       built. You can invoke the corresponding section of the makefile with

	   make perl

       That produces a new perl binary in the current directory with all
       extensions linked in that can be found in INST_ARCHLIB, SITELIBEXP, and
       PERL_ARCHLIB. To do that, MakeMaker writes a new Makefile, on UNIX,
       this is called Makefile.aperl (may be system dependent). If you want to
       force the creation of a new perl, it is recommended that you delete
       this Makefile.aperl, so the directories are searched through for
       linkable libraries again.

       The binary can be installed into the directory where perl normally
       resides on your machine with

	   make inst_perl

       To produce a perl binary with a different name than "perl", either say

	   perl Makefile.PL MAP_TARGET=myperl
	   make myperl
	   make inst_perl

       or say

	   perl Makefile.PL
	   make myperl MAP_TARGET=myperl
	   make inst_perl MAP_TARGET=myperl

       In any case you will be prompted with the correct invocation of the
       "inst_perl" target that installs the new binary into INSTALLBIN.

       make inst_perl by default writes some documentation of what has been
       done into the file "$(INSTALLARCHLIB)/perllocal.pod". This can be
       bypassed by calling make pure_inst_perl.

       Warning: the inst_perl: target will most probably overwrite your
       existing perl binary. Use with care!

       Sometimes you might want to build a statically linked perl although
       your system supports dynamic loading. In this case you may explicitly
       set the linktype with the invocation of the Makefile.PL or make:

	   perl Makefile.PL LINKTYPE=static    # recommended

       or

	   make LINKTYPE=static		       # works on most systems

   Determination of Perl Library and Installation Locations
       MakeMaker needs to know, or to guess, where certain things are located.
       Especially INST_LIB and INST_ARCHLIB (where to put the files during the
       make(1) run), PERL_LIB and PERL_ARCHLIB (where to read existing modules
       from), and PERL_INC (header files and "libperl*.*").

       Extensions may be built either using the contents of the perl source
       directory tree or from the installed perl library. The recommended way
       is to build extensions after you have run 'make install' on perl
       itself. You can do that in any directory on your hard disk that is not
       below the perl source tree. The support for extensions below the ext
       directory of the perl distribution is only good for the standard
       extensions that come with perl.

       If an extension is being built below the "ext/" directory of the perl
       source then MakeMaker will set PERL_SRC automatically (e.g., "../..").
       If PERL_SRC is defined and the extension is recognized as a standard
       extension, then other variables default to the following:

	 PERL_INC     = PERL_SRC
	 PERL_LIB     = PERL_SRC/lib
	 PERL_ARCHLIB = PERL_SRC/lib
	 INST_LIB     = PERL_LIB
	 INST_ARCHLIB = PERL_ARCHLIB

       If an extension is being built away from the perl source then MakeMaker
       will leave PERL_SRC undefined and default to using the installed copy
       of the perl library. The other variables default to the following:

	 PERL_INC     = $archlibexp/CORE
	 PERL_LIB     = $privlibexp
	 PERL_ARCHLIB = $archlibexp
	 INST_LIB     = ./blib/lib
	 INST_ARCHLIB = ./blib/arch

       If perl has not yet been installed then PERL_SRC can be defined on the
       command line as shown in the previous section.

   Which architecture dependent directory?
       If you don't want to keep the defaults for the INSTALL* macros,
       MakeMaker helps you to minimize the typing needed: the usual
       relationship between INSTALLPRIVLIB and INSTALLARCHLIB is determined by
       Configure at perl compilation time. MakeMaker supports the user who
       sets INSTALLPRIVLIB. If INSTALLPRIVLIB is set, but INSTALLARCHLIB not,
       then MakeMaker defaults the latter to be the same subdirectory of
       INSTALLPRIVLIB as Configure decided for the counterparts in %Config,
       otherwise it defaults to INSTALLPRIVLIB. The same relationship holds
       for INSTALLSITELIB and INSTALLSITEARCH.

       MakeMaker gives you much more freedom than needed to configure internal
       variables and get different results. It is worth mentioning that
       make(1) also lets you configure most of the variables that are used in
       the Makefile. But in the majority of situations this will not be
       necessary, and should only be done if the author of a package
       recommends it (or you know what you're doing).

   Using Attributes and Parameters
       The following attributes may be specified as arguments to
       WriteMakefile() or as NAME=VALUE pairs on the command line.

       ABSTRACT
	 One line description of the module. Will be included in PPD file.

       ABSTRACT_FROM
	 Name of the file that contains the package description. MakeMaker
	 looks for a line in the POD matching /^($package\s-\s)(.*)/. This is
	 typically the first line in the "=head1 NAME" section. $2 becomes the
	 abstract.

       AUTHOR
	 Array of strings containing name (and email address) of package
	 author(s).  Is used in CPAN Meta files (META.yml or META.json) and
	 PPD (Perl Package Description) files for PPM (Perl Package Manager).

       BINARY_LOCATION
	 Used when creating PPD files for binary packages.  It can be set to a
	 full or relative path or URL to the binary archive for a particular
	 architecture.	For example:

		 perl Makefile.PL BINARY_LOCATION=x86/Agent.tar.gz

	 builds a PPD package that references a binary of the "Agent" package,
	 located in the "x86" directory relative to the PPD itself.

       BUILD_REQUIRES
	 A hash of modules that are needed to build your module but not run
	 it.

	 This will go into the "build_requires" field of your CPAN Meta file.
	 (META.yml or META.json).

	 The format is the same as PREREQ_PM.

       C Ref to array of *.c file names. Initialised from a directory scan and
	 the values portion of the XS attribute hash. This is not currently
	 used by MakeMaker but may be handy in Makefile.PLs.

       CCFLAGS
	 String that will be included in the compiler call command line
	 between the arguments INC and OPTIMIZE.

       CONFIG
	 Arrayref. E.g. [qw(archname manext)] defines ARCHNAME & MANEXT from
	 config.sh. MakeMaker will add to CONFIG the following values anyway:
	 ar cc cccdlflags ccdlflags dlext dlsrc ld lddlflags ldflags libc
	 lib_ext obj_ext ranlib sitelibexp sitearchexp so

       CONFIGURE
	 CODE reference. The subroutine should return a hash reference. The
	 hash may contain further attributes, e.g. {LIBS => ...}, that have to
	 be determined by some evaluation method.

       CONFIGURE_REQUIRES
	 A hash of modules that are required to run Makefile.PL itself, but
	 not to run your distribution.

	 This will go into the "configure_requires" field of your CPAN Meta
	 file (META.yml or META.json)

	 Defaults to "{ "ExtUtils::MakeMaker" => 0 }"

	 The format is the same as PREREQ_PM.

       DEFINE
	 Something like "-DHAVE_UNISTD_H"

       DESTDIR
	 This is the root directory into which the code will be installed.  It
	 prepends itself to the normal prefix.	For example, if your code
	 would normally go into /usr/local/lib/perl you could set
	 DESTDIR=~/tmp/ and installation would go into
	 ~/tmp/usr/local/lib/perl.

	 This is primarily of use for people who repackage Perl modules.

	 NOTE: Due to the nature of make, it is important that you put the
	 trailing slash on your DESTDIR.  ~/tmp/ not ~/tmp.

       DIR
	 Ref to array of subdirectories containing Makefile.PLs e.g. ['sdbm']
	 in ext/SDBM_File

       DISTNAME
	 A safe filename for the package.

	 Defaults to NAME below but with :: replaced with -.

	 For example, Foo::Bar becomes Foo-Bar.

       DISTVNAME
	 Your name for distributing the package with the version number
	 included.  This is used by 'make dist' to name the resulting archive
	 file.

	 Defaults to DISTNAME-VERSION.

	 For example, version 1.04 of Foo::Bar becomes Foo-Bar-1.04.

	 On some OS's where . has special meaning VERSION_SYM may be used in
	 place of VERSION.

       DL_FUNCS
	 Hashref of symbol names for routines to be made available as
	 universal symbols.  Each key/value pair consists of the package name
	 and an array of routine names in that package.	 Used only under AIX,
	 OS/2, VMS and Win32 at present.  The routine names supplied will be
	 expanded in the same way as XSUB names are expanded by the XS()
	 macro.	 Defaults to

	   {"$(NAME)" => ["boot_$(NAME)" ] }

	 e.g.

	   {"RPC" => [qw( boot_rpcb rpcb_gettime getnetconfigent )],
	    "NetconfigPtr" => [ 'DESTROY'] }

	 Please see the ExtUtils::Mksymlists documentation for more
	 information about the DL_FUNCS, DL_VARS and FUNCLIST attributes.

       DL_VARS
	 Array of symbol names for variables to be made available as universal
	 symbols.  Used only under AIX, OS/2, VMS and Win32 at present.
	 Defaults to [].  (e.g. [ qw(Foo_version Foo_numstreams Foo_tree ) ])

       EXCLUDE_EXT
	 Array of extension names to exclude when doing a static build.	 This
	 is ignored if INCLUDE_EXT is present.	Consult INCLUDE_EXT for more
	 details.  (e.g.  [ qw( Socket POSIX ) ] )

	 This attribute may be most useful when specified as a string on the
	 command line:	perl Makefile.PL EXCLUDE_EXT='Socket Safe'

       EXE_FILES
	 Ref to array of executable files. The files will be copied to the
	 INST_SCRIPT directory. Make realclean will delete them from there
	 again.

	 If your executables start with something like #!perl or
	 #!/usr/bin/perl MakeMaker will change this to the path of the perl
	 'Makefile.PL' was invoked with so the programs will be sure to run
	 properly even if perl is not in /usr/bin/perl.

       FIRST_MAKEFILE
	 The name of the Makefile to be produced.  This is used for the second
	 Makefile that will be produced for the MAP_TARGET.

	 Defaults to 'Makefile' or 'Descrip.MMS' on VMS.

	 (Note: we couldn't use MAKEFILE because dmake uses this for something
	 else).

       FULLPERL
	 Perl binary able to run this extension, load XS modules, etc...

       FULLPERLRUN
	 Like PERLRUN, except it uses FULLPERL.

       FULLPERLRUNINST
	 Like PERLRUNINST, except it uses FULLPERL.

       FUNCLIST
	 This provides an alternate means to specify function names to be
	 exported from the extension.  Its value is a reference to an array of
	 function names to be exported by the extension.  These names are
	 passed through unaltered to the linker options file.

       H Ref to array of *.h file names. Similar to C.

       IMPORTS
	 This attribute is used to specify names to be imported into the
	 extension. Takes a hash ref.

	 It is only used on OS/2 and Win32.

       INC
	 Include file dirs eg: "-I/usr/5include -I/path/to/inc"

       INCLUDE_EXT
	 Array of extension names to be included when doing a static build.
	 MakeMaker will normally build with all of the installed extensions
	 when doing a static build, and that is usually the desired behavior.
	 If INCLUDE_EXT is present then MakeMaker will build only with those
	 extensions which are explicitly mentioned. (e.g.  [ qw( Socket POSIX
	 ) ])

	 It is not necessary to mention DynaLoader or the current extension
	 when filling in INCLUDE_EXT.  If the INCLUDE_EXT is mentioned but is
	 empty then only DynaLoader and the current extension will be included
	 in the build.

	 This attribute may be most useful when specified as a string on the
	 command line:	perl Makefile.PL INCLUDE_EXT='POSIX Socket
	 Devel::Peek'

       INSTALLARCHLIB
	 Used by 'make install', which copies files from INST_ARCHLIB to this
	 directory if INSTALLDIRS is set to perl.

       INSTALLBIN
	 Directory to install binary files (e.g. tkperl) into if
	 INSTALLDIRS=perl.

       INSTALLDIRS
	 Determines which of the sets of installation directories to choose:
	 perl, site or vendor.	Defaults to site.

       INSTALLMAN1DIR
       INSTALLMAN3DIR
	 These directories get the man pages at 'make install' time if
	 INSTALLDIRS=perl.  Defaults to $Config{installman*dir}.

	 If set to 'none', no man pages will be installed.

       INSTALLPRIVLIB
	 Used by 'make install', which copies files from INST_LIB to this
	 directory if INSTALLDIRS is set to perl.

	 Defaults to $Config{installprivlib}.

       INSTALLSCRIPT
	 Used by 'make install' which copies files from INST_SCRIPT to this
	 directory if INSTALLDIRS=perl.

       INSTALLSITEARCH
	 Used by 'make install', which copies files from INST_ARCHLIB to this
	 directory if INSTALLDIRS is set to site (default).

       INSTALLSITEBIN
	 Used by 'make install', which copies files from INST_BIN to this
	 directory if INSTALLDIRS is set to site (default).

       INSTALLSITELIB
	 Used by 'make install', which copies files from INST_LIB to this
	 directory if INSTALLDIRS is set to site (default).

       INSTALLSITEMAN1DIR
       INSTALLSITEMAN3DIR
	 These directories get the man pages at 'make install' time if
	 INSTALLDIRS=site (default).  Defaults to
	 $(SITEPREFIX)/man/man$(MAN*EXT).

	 If set to 'none', no man pages will be installed.

       INSTALLSITESCRIPT
	 Used by 'make install' which copies files from INST_SCRIPT to this
	 directory if INSTALLDIRS is set to site (default).

       INSTALLVENDORARCH
	 Used by 'make install', which copies files from INST_ARCHLIB to this
	 directory if INSTALLDIRS is set to vendor.

       INSTALLVENDORBIN
	 Used by 'make install', which copies files from INST_BIN to this
	 directory if INSTALLDIRS is set to vendor.

       INSTALLVENDORLIB
	 Used by 'make install', which copies files from INST_LIB to this
	 directory if INSTALLDIRS is set to vendor.

       INSTALLVENDORMAN1DIR
       INSTALLVENDORMAN3DIR
	 These directories get the man pages at 'make install' time if
	 INSTALLDIRS=vendor.  Defaults to $(VENDORPREFIX)/man/man$(MAN*EXT).

	 If set to 'none', no man pages will be installed.

       INSTALLVENDORSCRIPT
	 Used by 'make install' which copies files from INST_SCRIPT to this
	 directory if INSTALLDIRS is set to vendor.

       INST_ARCHLIB
	 Same as INST_LIB for architecture dependent files.

       INST_BIN
	 Directory to put real binary files during 'make'. These will be
	 copied to INSTALLBIN during 'make install'

       INST_LIB
	 Directory where we put library files of this extension while building
	 it.

       INST_MAN1DIR
	 Directory to hold the man pages at 'make' time

       INST_MAN3DIR
	 Directory to hold the man pages at 'make' time

       INST_SCRIPT
	 Directory where executable files should be installed during 'make'.
	 Defaults to "./blib/script", just to have a dummy location during
	 testing. make install will copy the files in INST_SCRIPT to
	 INSTALLSCRIPT.

       LD
	 Program to be used to link libraries for dynamic loading.

	 Defaults to $Config{ld}.

       LDDLFLAGS
	 Any special flags that might need to be passed to ld to create a
	 shared library suitable for dynamic loading.  It is up to the
	 makefile to use it.  (See "lddlflags" in Config)

	 Defaults to $Config{lddlflags}.

       LDFROM
	 Defaults to "$(OBJECT)" and is used in the ld command to specify what
	 files to link/load from (also see dynamic_lib below for how to
	 specify ld flags)

       LIB
	 LIB should only be set at "perl Makefile.PL" time but is allowed as a
	 MakeMaker argument. It has the effect of setting both INSTALLPRIVLIB
	 and INSTALLSITELIB to that value regardless any explicit setting of
	 those arguments (or of PREFIX).  INSTALLARCHLIB and INSTALLSITEARCH
	 are set to the corresponding architecture subdirectory.

       LIBPERL_A
	 The filename of the perllibrary that will be used together with this
	 extension. Defaults to libperl.a.

       LIBS
	 An anonymous array of alternative library specifications to be
	 searched for (in order) until at least one library is found. E.g.

	   'LIBS' => ["-lgdbm", "-ldbm -lfoo", "-L/path -ldbm.nfs"]

	 Mind, that any element of the array contains a complete set of
	 arguments for the ld command. So do not specify

	   'LIBS' => ["-ltcl", "-ltk", "-lX11"]

	 See ODBM_File/Makefile.PL for an example, where an array is needed.
	 If you specify a scalar as in

	   'LIBS' => "-ltcl -ltk -lX11"

	 MakeMaker will turn it into an array with one element.

       LICENSE
	 The licensing terms of your distribution.  Generally it's "perl" for
	 the same license as Perl itself.

	 See Module::Build::API for the list of options.

	 Defaults to "unknown".

       LINKTYPE
	 'static' or 'dynamic' (default unless usedl=undef in config.sh).
	 Should only be used to force static linking (also see linkext below).

       MAKE
	 Variant of make you intend to run the generated Makefile with.	 This
	 parameter lets Makefile.PL know what make quirks to account for when
	 generating the Makefile.

	 MakeMaker also honors the MAKE environment variable.  This parameter
	 takes precedence.

	 Currently the only significant values are 'dmake' and 'nmake' for
	 Windows users, instructing MakeMaker to generate a Makefile in the
	 flavour of DMake ("Dennis Vadura's Make") or Microsoft NMake
	 respectively.

	 Defaults to $Config{make}, which may go looking for a Make program in
	 your environment.

	 How are you supposed to know what flavour of Make a Makefile has been
	 generated for if you didn't specify a value explicitly? Search the
	 generated Makefile for the definition of the MAKE variable, which is
	 used to recursively invoke the Make utility. That will tell you what
	 Make you're supposed to invoke the Makefile with.

       MAKEAPERL
	 Boolean which tells MakeMaker that it should include the rules to
	 make a perl. This is handled automatically as a switch by MakeMaker.
	 The user normally does not need it.

       MAKEFILE_OLD
	 When 'make clean' or similar is run, the $(FIRST_MAKEFILE) will be
	 backed up at this location.

	 Defaults to $(FIRST_MAKEFILE).old or $(FIRST_MAKEFILE)_old on VMS.

       MAN1PODS
	 Hashref of pod-containing files. MakeMaker will default this to all
	 EXE_FILES files that include POD directives. The files listed here
	 will be converted to man pages and installed as was requested at
	 Configure time.

	 This hash should map POD files (or scripts containing POD) to the man
	 file names under the "blib/man1/" directory, as in the following
	 example:

	   MAN1PODS	       => {
	     'doc/command.pod'	  => 'blib/man1/command.1',
	     'scripts/script.pl'  => 'blib/man1/script.1',
	   }

       MAN3PODS
	 Hashref that assigns to *.pm and *.pod files the files into which the
	 manpages are to be written. MakeMaker parses all *.pod and *.pm files
	 for POD directives. Files that contain POD will be the default keys
	 of the MAN3PODS hashref. These will then be converted to man pages
	 during "make" and will be installed during "make install".

	 Example similar to MAN1PODS.

       MAP_TARGET
	 If it is intended that a new perl binary be produced, this variable
	 may hold a name for that binary. Defaults to perl

       META_ADD
       META_MERGE
	 A hashref of items to add to the CPAN Meta file (META.yml or
	 META.json).

	 They differ in how they behave if they have the same key as the
	 default metadata.  META_ADD will override the default value with its
	 own.  META_MERGE will merge its value with the default.

	 Unless you want to override the defaults, prefer META_MERGE so as to
	 get the advantage of any future defaults.

       MIN_PERL_VERSION
	 The minimum required version of Perl for this distribution.

	 Either the 5.006001 or the 5.6.1 format is acceptable.

       MYEXTLIB
	 If the extension links to a library that it builds, set this to the
	 name of the library (see SDBM_File)

       NAME
	 The package representing the distribution. For example, "Test::More"
	 or "ExtUtils::MakeMaker". It will be used to derive information about
	 the distribution such as the DISTNAME, installation locations within
	 the Perl library and where XS files will be looked for by default
	 (see XS).

	 "NAME" must be a valid Perl package name and it must have an
	 associated ".pm" file. For example, "Foo::Bar" is a valid "NAME" and
	 there must exist Foo/Bar.pm.  Any XS code should be in Bar.xs unless
	 stated otherwise.

	 Your distribution must have a "NAME".

       NEEDS_LINKING
	 MakeMaker will figure out if an extension contains linkable code
	 anywhere down the directory tree, and will set this variable
	 accordingly, but you can speed it up a very little bit if you define
	 this boolean variable yourself.

       NOECHO
	 Command so make does not print the literal commands it's running.

	 By setting it to an empty string you can generate a Makefile that
	 prints all commands. Mainly used in debugging MakeMaker itself.

	 Defaults to "@".

       NORECURS
	 Boolean.  Attribute to inhibit descending into subdirectories.

       NO_META
	 When true, suppresses the generation and addition to the MANIFEST of
	 the META.yml and META.json module meta-data files during 'make
	 distdir'.

	 Defaults to false.

       NO_MYMETA
	 When true, suppresses the generation of MYMETA.yml and MYMETA.json
	 module meta-data files during 'perl Makefile.PL'.

	 Defaults to false.

       NO_VC
	 In general, any generated Makefile checks for the current version of
	 MakeMaker and the version the Makefile was built under. If NO_VC is
	 set, the version check is neglected. Do not write this into your
	 Makefile.PL, use it interactively instead.

       OBJECT
	 List of object files, defaults to '$(BASEEXT)$(OBJ_EXT)', but can be
	 a long string containing all object files, e.g. "tkpBind.o
	 tkpButton.o tkpCanvas.o"

	 (Where BASEEXT is the last component of NAME, and OBJ_EXT is
	 $Config{obj_ext}.)

       OPTIMIZE
	 Defaults to "-O". Set it to "-g" to turn debugging on. The flag is
	 passed to subdirectory makes.

       PERL
	 Perl binary for tasks that can be done by miniperl.

       PERL_CORE
	 Set only when MakeMaker is building the extensions of the Perl core
	 distribution.

       PERLMAINCC
	 The call to the program that is able to compile perlmain.c. Defaults
	 to $(CC).

       PERL_ARCHLIB
	 Same as for PERL_LIB, but for architecture dependent files.

	 Used only when MakeMaker is building the extensions of the Perl core
	 distribution (because normally $(PERL_ARCHLIB) is automatically in
	 @INC, and adding it would get in the way of PERL5LIB).

       PERL_LIB
	 Directory containing the Perl library to use.

	 Used only when MakeMaker is building the extensions of the Perl core
	 distribution (because normally $(PERL_LIB) is automatically in @INC,
	 and adding it would get in the way of PERL5LIB).

       PERL_MALLOC_OK
	 defaults to 0.	 Should be set to TRUE if the extension can work with
	 the memory allocation routines substituted by the Perl malloc()
	 subsystem.  This should be applicable to most extensions with
	 exceptions of those

	 ·   with bugs in memory allocations which are caught by Perl's
	     malloc();

	 ·   which interact with the memory allocator in other ways than via
	     malloc(), realloc(), free(), calloc(), sbrk() and brk();

	 ·   which rely on special alignment which is not provided by Perl's
	     malloc().

	 NOTE.	Neglecting to set this flag in any one of the loaded extension
	 nullifies many advantages of Perl's malloc(), such as better usage of
	 system resources, error detection, memory usage reporting, catchable
	 failure of memory allocations, etc.

       PERLPREFIX
	 Directory under which core modules are to be installed.

	 Defaults to $Config{installprefixexp}, falling back to
	 $Config{installprefix}, $Config{prefixexp} or $Config{prefix} should
	 $Config{installprefixexp} not exist.

	 Overridden by PREFIX.

       PERLRUN
	 Use this instead of $(PERL) when you wish to run perl.	 It will set
	 up extra necessary flags for you.

       PERLRUNINST
	 Use this instead of $(PERL) when you wish to run perl to work with
	 modules.  It will add things like -I$(INST_ARCH) and other necessary
	 flags so perl can see the modules you're about to install.

       PERL_SRC
	 Directory containing the Perl source code (use of this should be
	 avoided, it may be undefined)

       PERM_DIR
	 Desired permission for directories. Defaults to 755.

       PERM_RW
	 Desired permission for read/writable files. Defaults to 644.

       PERM_RWX
	 Desired permission for executable files. Defaults to 755.

       PL_FILES
	 MakeMaker can run programs to generate files for you at build time.
	 By default any file named *.PL (except Makefile.PL and Build.PL) in
	 the top level directory will be assumed to be a Perl program and run
	 passing its own basename in as an argument.  For example...

	     perl foo.PL foo

	 This behavior can be overridden by supplying your own set of files to
	 search.  PL_FILES accepts a hash ref, the key being the file to run
	 and the value is passed in as the first argument when the PL file is
	 run.

	     PL_FILES => {'bin/foobar.PL' => 'bin/foobar'}

	 Would run bin/foobar.PL like this:

	     perl bin/foobar.PL bin/foobar

	 If multiple files from one program are desired an array ref can be
	 used.

	     PL_FILES => {'bin/foobar.PL' => [qw(bin/foobar1 bin/foobar2)]}

	 In this case the program will be run multiple times using each target
	 file.

	     perl bin/foobar.PL bin/foobar1
	     perl bin/foobar.PL bin/foobar2

	 PL files are normally run after pm_to_blib and include INST_LIB and
	 INST_ARCH in their @INC, so the just built modules can be accessed...
	 unless the PL file is making a module (or anything else in PM) in
	 which case it is run before pm_to_blib and does not include INST_LIB
	 and INST_ARCH in its @INC.  This apparently odd behavior is there for
	 backwards compatibility (and it's somewhat DWIM).

       PM
	 Hashref of .pm files and *.pl files to be installed.  e.g.

	   {'name_of_file.pm' => '$(INST_LIBDIR)/install_as.pm'}

	 By default this will include *.pm and *.pl and the files found in the
	 PMLIBDIRS directories.	 Defining PM in the Makefile.PL will override
	 PMLIBDIRS.

       PMLIBDIRS
	 Ref to array of subdirectories containing library files.  Defaults to
	 [ 'lib', $(BASEEXT) ]. The directories will be scanned and any files
	 they contain will be installed in the corresponding location in the
	 library.  A libscan() method can be used to alter the behaviour.
	 Defining PM in the Makefile.PL will override PMLIBDIRS.

	 (Where BASEEXT is the last component of NAME.)

       PM_FILTER
	 A filter program, in the traditional Unix sense (input from stdin,
	 output to stdout) that is passed on each .pm file during the build
	 (in the pm_to_blib() phase).  It is empty by default, meaning no
	 filtering is done.

	 Great care is necessary when defining the command if quoting needs to
	 be done.  For instance, you would need to say:

	   {'PM_FILTER' => 'grep -v \\"^\\#\\"'}

	 to remove all the leading comments on the fly during the build.  The
	 extra \\ are necessary, unfortunately, because this variable is
	 interpolated within the context of a Perl program built on the
	 command line, and double quotes are what is used with the -e switch
	 to build that command line.  The # is escaped for the Makefile, since
	 what is going to be generated will then be:

	   PM_FILTER = grep -v \"^\#\"

	 Without the \\ before the #, we'd have the start of a Makefile
	 comment, and the macro would be incorrectly defined.

       POLLUTE
	 Release 5.005 grandfathered old global symbol names by providing
	 preprocessor macros for extension source compatibility.  As of
	 release 5.6, these preprocessor definitions are not available by
	 default.  The POLLUTE flag specifies that the old names should still
	 be defined:

	   perl Makefile.PL POLLUTE=1

	 Please inform the module author if this is necessary to successfully
	 install a module under 5.6 or later.

       PPM_INSTALL_EXEC
	 Name of the executable used to run "PPM_INSTALL_SCRIPT" below. (e.g.
	 perl)

       PPM_INSTALL_SCRIPT
	 Name of the script that gets executed by the Perl Package Manager
	 after the installation of a package.

       PREFIX
	 This overrides all the default install locations.  Man pages,
	 libraries, scripts, etc...  MakeMaker will try to make an educated
	 guess about where to place things under the new PREFIX based on your
	 Config defaults.  Failing that, it will fall back to a structure
	 which should be sensible for your platform.

	 If you specify LIB or any INSTALL* variables they will not be
	 affected by the PREFIX.

       PREREQ_FATAL
	 Bool. If this parameter is true, failing to have the required modules
	 (or the right versions thereof) will be fatal. "perl Makefile.PL"
	 will "die" instead of simply informing the user of the missing
	 dependencies.

	 It is extremely rare to have to use "PREREQ_FATAL". Its use by module
	 authors is strongly discouraged and should never be used lightly.

	 Module installation tools have ways of resolving unmet dependencies
	 but to do that they need a Makefile.  Using "PREREQ_FATAL" breaks
	 this.	That's bad.

	 Assuming you have good test coverage, your tests should fail with
	 missing dependencies informing the user more strongly that something
	 is wrong.  You can write a t/00compile.t test which will simply check
	 that your code compiles and stop "make test" prematurely if it
	 doesn't.  See "BAIL_OUT" in Test::More for more details.

       PREREQ_PM
	 A hash of modules that are needed to run your module.	The keys are
	 the module names ie. Test::More, and the minimum version is the
	 value. If the required version number is 0 any version will do.

	 This will go into the "requires" field of your CPAN Meta file
	 (META.yml or META.json).

	     PREREQ_PM => {
		 # Require Test::More at least 0.47
		 "Test::More" => "0.47",

		 # Require any version of Acme::Buffy
		 "Acme::Buffy" => 0,
	     }

       PREREQ_PRINT
	 Bool.	If this parameter is true, the prerequisites will be printed
	 to stdout and MakeMaker will exit.  The output format is an evalable
	 hash ref.

	   $PREREQ_PM = {
			  'A::B' => Vers1,
			  'C::D' => Vers2,
			  ...
			};

	 If a distribution defines a minimal required perl version, this is
	 added to the output as an additional line of the form:

	   $MIN_PERL_VERSION = '5.008001';

	 If BUILD_REQUIRES is not empty, it will be dumped as $BUILD_REQUIRES
	 hashref.

       PRINT_PREREQ
	 RedHatism for "PREREQ_PRINT".	The output format is different,
	 though:

	     perl(A::B)>=Vers1 perl(C::D)>=Vers2 ...

	 A minimal required perl version, if present, will look like this:

	     perl(perl)>=5.008001

       SITEPREFIX
	 Like PERLPREFIX, but only for the site install locations.

	 Defaults to $Config{siteprefixexp}.  Perls prior to 5.6.0 didn't have
	 an explicit siteprefix in the Config.	In those cases
	 $Config{installprefix} will be used.

	 Overridable by PREFIX

       SIGN
	 When true, perform the generation and addition to the MANIFEST of the
	 SIGNATURE file in the distdir during 'make distdir', via 'cpansign
	 -s'.

	 Note that you need to install the Module::Signature module to perform
	 this operation.

	 Defaults to false.

       SKIP
	 Arrayref. E.g. [qw(name1 name2)] skip (do not write) sections of the
	 Makefile. Caution! Do not use the SKIP attribute for the negligible
	 speedup. It may seriously damage the resulting Makefile. Only use it
	 if you really need it.

       TEST_REQUIRES
	 A hash of modules that are needed to test your module but not run or
	 build it.

	 This will go into the "test_requires" field of your CPAN Meta file.
	 (META.yml or META.json).

	 The format is the same as PREREQ_PM.

       TYPEMAPS
	 Ref to array of typemap file names.  Use this when the typemaps are
	 in some directory other than the current directory or when they are
	 not named typemap.  The last typemap in the list takes precedence.  A
	 typemap in the current directory has highest precedence, even if it
	 isn't listed in TYPEMAPS.  The default system typemap has lowest
	 precedence.

       VENDORPREFIX
	 Like PERLPREFIX, but only for the vendor install locations.

	 Defaults to $Config{vendorprefixexp}.

	 Overridable by PREFIX

       VERBINST
	 If true, make install will be verbose

       VERSION
	 Your version number for distributing the package.  This defaults to
	 0.1.

       VERSION_FROM
	 Instead of specifying the VERSION in the Makefile.PL you can let
	 MakeMaker parse a file to determine the version number. The parsing
	 routine requires that the file named by VERSION_FROM contains one
	 single line to compute the version number. The first line in the file
	 that contains something like a $VERSION assignment or "package Name
	 VERSION" will be used. The following lines will be parsed o.k.:

	     # Good
	     package Foo::Bar 1.23;			 # 1.23
	     $VERSION	= '1.00';			 # 1.00
	     *VERSION	= \'1.01';			 # 1.01
	     ($VERSION) = q$Revision$ =~ /(\d+)/g;	 # The digits in $Revision$
	     $FOO::VERSION = '1.10';			 # 1.10
	     *FOO::VERSION = \'1.11';			 # 1.11

	 but these will fail:

	     # Bad
	     my $VERSION	 = '1.01';
	     local $VERSION	 = '1.02';
	     local $FOO::VERSION = '1.30';

	 "Version strings" are incompatible and should not be used.

	     # Bad
	     $VERSION = 1.2.3;
	     $VERSION = v1.2.3;

	 version objects are fine.  As of MakeMaker 6.35 version.pm will be
	 automatically loaded, but you must declare the dependency on
	 version.pm.  For compatibility with older MakeMaker you should load
	 on the same line as $VERSION is declared.

	     # All on one line
	     use version; our $VERSION = qv(1.2.3);

	 (Putting "my" or "local" on the preceding line will work o.k.)

	 The file named in VERSION_FROM is not added as a dependency to
	 Makefile. This is not really correct, but it would be a major pain
	 during development to have to rewrite the Makefile for any smallish
	 change in that file. If you want to make sure that the Makefile
	 contains the correct VERSION macro after any change of the file, you
	 would have to do something like

	     depend => { Makefile => '$(VERSION_FROM)' }

	 See attribute "depend" below.

       VERSION_SYM
	 A sanitized VERSION with . replaced by _.  For places where . has
	 special meaning (some filesystems, RCS labels, etc...)

       XS
	 Hashref of .xs files. MakeMaker will default this.  e.g.

	   {'name_of_file.xs' => 'name_of_file.c'}

	 The .c files will automatically be included in the list of files
	 deleted by a make clean.

       XSOPT
	 String of options to pass to xsubpp.  This might include "-C++" or
	 "-extern".  Do not include typemaps here; the TYPEMAP parameter
	 exists for that purpose.

       XSPROTOARG
	 May be set to an empty string, which is identical to "-prototypes",
	 or "-noprototypes". See the xsubpp documentation for details.
	 MakeMaker defaults to the empty string.

       XS_VERSION
	 Your version number for the .xs file of this package.	This defaults
	 to the value of the VERSION attribute.

   Additional lowercase attributes
       can be used to pass parameters to the methods which implement that part
       of the Makefile.	 Parameters are specified as a hash ref but are passed
       to the method as a hash.

       clean
	   {FILES => "*.xyz foo"}

       depend
	   {ANY_TARGET => ANY_DEPENDENCY, ...}

	 (ANY_TARGET must not be given a double-colon rule by MakeMaker.)

       dist
	   {TARFLAGS => 'cvfF', COMPRESS => 'gzip', SUFFIX => '.gz',
	   SHAR => 'shar -m', DIST_CP => 'ln', ZIP => '/bin/zip',
	   ZIPFLAGS => '-rl', DIST_DEFAULT => 'private tardist' }

	 If you specify COMPRESS, then SUFFIX should also be altered, as it is
	 needed to tell make the target file of the compression. Setting
	 DIST_CP to ln can be useful, if you need to preserve the timestamps
	 on your files. DIST_CP can take the values 'cp', which copies the
	 file, 'ln', which links the file, and 'best' which copies symbolic
	 links and links the rest. Default is 'best'.

       dynamic_lib
	   {ARMAYBE => 'ar', OTHERLDFLAGS => '...', INST_DYNAMIC_DEP => '...'}

       linkext
	   {LINKTYPE => 'static', 'dynamic' or ''}

	 NB: Extensions that have nothing but *.pm files had to say

	   {LINKTYPE => ''}

	 with Pre-5.0 MakeMakers. Since version 5.00 of MakeMaker such a line
	 can be deleted safely. MakeMaker recognizes when there's nothing to
	 be linked.

       macro
	   {ANY_MACRO => ANY_VALUE, ...}

       postamble
	 Anything put here will be passed to MY::postamble() if you have one.

       realclean
	   {FILES => '$(INST_ARCHAUTODIR)/*.xyz'}

       test
	   {TESTS => 't/*.t'}

       tool_autosplit
	   {MAXLEN => 8}

   Overriding MakeMaker Methods
       If you cannot achieve the desired Makefile behaviour by specifying
       attributes you may define private subroutines in the Makefile.PL.  Each
       subroutine returns the text it wishes to have written to the Makefile.
       To override a section of the Makefile you can either say:

	       sub MY::c_o { "new literal text" }

       or you can edit the default by saying something like:

	       package MY; # so that "SUPER" works right
	       sub c_o {
		   my $inherited = shift->SUPER::c_o(@_);
		   $inherited =~ s/old text/new text/;
		   $inherited;
	       }

       If you are running experiments with embedding perl as a library into
       other applications, you might find MakeMaker is not sufficient. You'd
       better have a look at ExtUtils::Embed which is a collection of
       utilities for embedding.

       If you still need a different solution, try to develop another
       subroutine that fits your needs and submit the diffs to
       "makemaker@perl.org"

       For a complete description of all MakeMaker methods see
       ExtUtils::MM_Unix.

       Here is a simple example of how to add a new target to the generated
       Makefile:

	   sub MY::postamble {
	       return <<'MAKE_FRAG';
	   $(MYEXTLIB): sdbm/Makefile
		   cd sdbm && $(MAKE) all

	   MAKE_FRAG
	   }

   The End Of Cargo Cult Programming
       WriteMakefile() now does some basic sanity checks on its parameters to
       protect against typos and malformatted values.  This means some things
       which happened to work in the past will now throw warnings and possibly
       produce internal errors.

       Some of the most common mistakes:

       "MAN3PODS => ' '"
	 This is commonly used to suppress the creation of man pages.
	 MAN3PODS takes a hash ref not a string, but the above worked by
	 accident in old versions of MakeMaker.

	 The correct code is "MAN3PODS => { }".

   Hintsfile support
       MakeMaker.pm uses the architecture-specific information from Config.pm.
       In addition it evaluates architecture specific hints files in a
       "hints/" directory. The hints files are expected to be named like their
       counterparts in "PERL_SRC/hints", but with an ".pl" file name extension
       (eg. "next_3_2.pl"). They are simply "eval"ed by MakeMaker within the
       WriteMakefile() subroutine, and can be used to execute commands as well
       as to include special variables. The rules which hintsfile is chosen
       are the same as in Configure.

       The hintsfile is eval()ed immediately after the arguments given to
       WriteMakefile are stuffed into a hash reference $self but before this
       reference becomes blessed. So if you want to do the equivalent to
       override or create an attribute you would say something like

	   $self->{LIBS} = ['-ldbm -lucb -lc'];

   Distribution Support
       For authors of extensions MakeMaker provides several Makefile targets.
       Most of the support comes from the ExtUtils::Manifest module, where
       additional documentation can be found.

       make distcheck
	   reports which files are below the build directory but not in the
	   MANIFEST file and vice versa. (See ExtUtils::Manifest::fullcheck()
	   for details)

       make skipcheck
	   reports which files are skipped due to the entries in the
	   "MANIFEST.SKIP" file (See ExtUtils::Manifest::skipcheck() for
	   details)

       make distclean
	   does a realclean first and then the distcheck. Note that this is
	   not needed to build a new distribution as long as you are sure that
	   the MANIFEST file is ok.

       make manifest
	   rewrites the MANIFEST file, adding all remaining files found (See
	   ExtUtils::Manifest::mkmanifest() for details)

       make distdir
	   Copies all the files that are in the MANIFEST file to a newly
	   created directory with the name "$(DISTNAME)-$(VERSION)". If that
	   directory exists, it will be removed first.

	   Additionally, it will create META.yml and META.json module meta-
	   data file in the distdir and add this to the distdir's MANIFEST.
	   You can shut this behavior off with the NO_META flag.

       make disttest
	   Makes a distdir first, and runs a "perl Makefile.PL", a make, and a
	   make test in that directory.

       make tardist
	   First does a distdir. Then a command $(PREOP) which defaults to a
	   null command, followed by $(TO_UNIX), which defaults to a null
	   command under UNIX, and will convert files in distribution
	   directory to UNIX format otherwise. Next it runs "tar" on that
	   directory into a tarfile and deletes the directory. Finishes with a
	   command $(POSTOP) which defaults to a null command.

       make dist
	   Defaults to $(DIST_DEFAULT) which in turn defaults to tardist.

       make uutardist
	   Runs a tardist first and uuencodes the tarfile.

       make shdist
	   First does a distdir. Then a command $(PREOP) which defaults to a
	   null command. Next it runs "shar" on that directory into a sharfile
	   and deletes the intermediate directory again. Finishes with a
	   command $(POSTOP) which defaults to a null command.	Note: For
	   shdist to work properly a "shar" program that can handle
	   directories is mandatory.

       make zipdist
	   First does a distdir. Then a command $(PREOP) which defaults to a
	   null command. Runs "$(ZIP) $(ZIPFLAGS)" on that directory into a
	   zipfile. Then deletes that directory. Finishes with a command
	   $(POSTOP) which defaults to a null command.

       make ci
	   Does a $(CI) and a $(RCS_LABEL) on all files in the MANIFEST file.

       Customization of the dist targets can be done by specifying a hash
       reference to the dist attribute of the WriteMakefile call. The
       following parameters are recognized:

	   CI		('ci -u')
	   COMPRESS	('gzip --best')
	   POSTOP	('@ :')
	   PREOP	('@ :')
	   TO_UNIX	(depends on the system)
	   RCS_LABEL	('rcs -q -Nv$(VERSION_SYM):')
	   SHAR		('shar')
	   SUFFIX	('.gz')
	   TAR		('tar')
	   TARFLAGS	('cvf')
	   ZIP		('zip')
	   ZIPFLAGS	('-r')

       An example:

	   WriteMakefile(
	       ...other options...
	       dist => {
		   COMPRESS => "bzip2",
		   SUFFIX   => ".bz2"
	       }
	   );

   Module Meta-Data (META and MYMETA)
       Long plaguing users of MakeMaker based modules has been the problem of
       getting basic information about the module out of the sources without
       running the Makefile.PL and doing a bunch of messy heuristics on the
       resulting Makefile.  Over the years, it has become standard to keep
       this information in one or more CPAN Meta files distributed with each
       distribution.

       The original format of CPAN Meta files was YAML and the corresponding
       file was called META.yml.  In 2010, version 2 of the CPAN::Meta::Spec
       was released, which mandates JSON format for the metadata in order to
       overcome certain compatibility issues between YAML serializers and to
       avoid breaking older clients unable to handle a new version of the
       spec.  The CPAN::Meta library is now standard for accessing old and
       new-style Meta files.

       If CPAN::Meta is installed, MakeMaker will automatically generate
       META.json and META.yml files for you and add them to your MANIFEST as
       part of the 'distdir' target (and thus the 'dist' target).  This is
       intended to seamlessly and rapidly populate CPAN with module meta-data.
       If you wish to shut this feature off, set the "NO_META"
       "WriteMakefile()" flag to true.

       At the 2008 QA Hackathon in Oslo, Perl module toolchain maintainers
       agrees to use the CPAN Meta format to communicate post-configuration
       requirements between toolchain components.  These files, MYMETA.json
       and MYMETA.yml, are generated when Makefile.PL generates a Makefile (if
       CPAN::Meta is installed).  Clients like CPAN or CPANPLUS will read this
       files to see what prerequisites must be fulfilled before building or
       testing the distribution.  If you with to shut this feature off, set
       the "NO_MYMETA" "WriteMakeFile()" flag to true.

   Disabling an extension
       If some events detected in Makefile.PL imply that there is no way to
       create the Module, but this is a normal state of things, then you can
       create a Makefile which does nothing, but succeeds on all the "usual"
       build targets.  To do so, use

	   use ExtUtils::MakeMaker qw(WriteEmptyMakefile);
	   WriteEmptyMakefile();

       instead of WriteMakefile().

       This may be useful if other modules expect this module to be built OK,
       as opposed to work OK (say, this system-dependent module builds in a
       subdirectory of some other distribution, or is listed as a dependency
       in a CPAN::Bundle, but the functionality is supported by different
       means on the current architecture).

   Other Handy Functions
       prompt
	       my $value = prompt($message);
	       my $value = prompt($message, $default);

	   The "prompt()" function provides an easy way to request user input
	   used to write a makefile.  It displays the $message as a prompt for
	   input.  If a $default is provided it will be used as a default.
	   The function returns the $value selected by the user.

	   If "prompt()" detects that it is not running interactively and
	   there is nothing on STDIN or if the PERL_MM_USE_DEFAULT environment
	   variable is set to true, the $default will be used without
	   prompting.  This prevents automated processes from blocking on user
	   input.

	   If no $default is provided an empty string will be used instead.

ENVIRONMENT
       PERL_MM_OPT
	   Command line options used by "MakeMaker->new()", and thus by
	   "WriteMakefile()".  The string is split on whitespace, and the
	   result is processed before any actual command line arguments are
	   processed.

       PERL_MM_USE_DEFAULT
	   If set to a true value then MakeMaker's prompt function will always
	   return the default without waiting for user input.

       PERL_CORE
	   Same as the PERL_CORE parameter.  The parameter overrides this.

SEE ALSO
       Module::Build is a pure-Perl alternative to MakeMaker which does not
       rely on make or any other external utility.  It is easier to extend to
       suit your needs.

       Module::Install is a wrapper around MakeMaker which adds features not
       normally available.

       ExtUtils::ModuleMaker and Module::Starter are both modules to help you
       setup your distribution.

       CPAN::Meta and CPAN::Meta::Spec explain CPAN Meta files in detail.

AUTHORS
       Andy Dougherty "doughera@lafayette.edu", Andreas Koenig
       "andreas.koenig@mind.de", Tim Bunce "timb@cpan.org".  VMS support by
       Charles Bailey "bailey@newman.upenn.edu".  OS/2 support by Ilya
       Zakharevich "ilya@math.ohio-state.edu".

       Currently maintained by Michael G Schwern "schwern@pobox.com"

       Send patches and ideas to "makemaker@perl.org".

       Send bug reports via http://rt.cpan.org/.  Please send your generated
       Makefile along with your report.

       For more up-to-date information, see <http://www.makemaker.org>.

       Repository available at
       <https://github.com/Perl-Toolchain-Gang/ExtUtils-MakeMaker>.

LICENSE
       This program is free software; you can redistribute it and/or modify it
       under the same terms as Perl itself.

       See <http://www.perl.com/perl/misc/Artistic.html>

perl v5.18.2			  2014-01-06	    ExtUtils::MakeMaker(3perl)
[top]

List of man pages available for Manjaro

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net