format - disk partitioning and maintenance utility
format [-f command-file] [-l log-file] [-x data-file]
[-d disk-name] [-t disk-type] [-p partition-name]
[-s] [-m] [-M] [-e] [disk-list]
format enables you to format, label, repair, and analyze disks on your
system. Unlike previous disk maintenance programs, format runs under
SunOS. Because there are limitations to what can be done to the system
disk while the system is running, format is also supported within the
memory-resident system environment. For most applications, however,
running format under SunOS is the more convenient approach.
format first uses the disk list defined in data-file if the -x option
is used. format then checks for the FORMAT_PATH environment variable, a
colon-separated list of filenames and/or directories. In the case of a
directory, format searches for a file named format.dat in that direc‐
tory; a filename should be an absolute pathname, and is used without
change. format adds all disk and partition definitions in each speci‐
fied file to the working set. Multiple identical definitions are
silently ignored. If FORMAT_PATH is not set, the path defaults to
disk-list is a list of disks in the form c?t?d? or /dev/rdsk/c?t?d?s?.
With the latter form, shell wildcard specifications are supported. For
example, specifying /dev/rdsk/c2* causes format to work on all drives
connected to controller c2 only. If no disk-list is specified, format
lists all the disks present in the system that can be administered by
Removable media devices are listed only when users execute format in
expert mode (option -e). This feature is provided for backward compati‐
bility. Use rmformat(1) for rewritable removable media devices.
The following options are supported:
Specify which disk should be made current upon
entry into the program. The disk is specified by
its logical name (for instance, -d c0t1d0). This
can also be accomplished by specifying a single
disk in the disk list.
Enable SCSI expert menu. Note this option is not
recommended for casual use.
Take command input from command-file rather than
the standard input. The file must contain commands
that appear just as they would if they had been
entered from the keyboard. With this option, for‐
mat does not issue continue? prompts; there is no
need to specify y(es) or n(o) answers in the com‐
mand-file. In non-interactive mode, format does
not initially expect the input of a disk selection
number. The user must specify the current working
disk with the -d disk-name option when format is
invoked, or specify disk and the disk selection
number in the command-file.
Log a transcript of the format session to the
indicated log-file, including the standard input,
the standard output and the standard error.
Enable extended messages. Provides more detailed
information in the event of an error.
Enable extended and diagnostic messages. Provides
extensive information on the state of a SCSI
device's mode pages, during formatting.
Specify the partition table for the disk which is
current upon entry into the program. The table is
specified by its name as defined in the data file.
This option can be used only if a disk is being
made current, and its type is either specified or
available from the disk label.
Silent. Suppress all of the standard output. Error
messages are still displayed. This is generally
used in conjunction with the -f option.
Specify the type of disk which is current upon
entry into the program. A disk's type is specified
by name in the data file. This option can only be
used if a disk is being made current as described
Use the list of disks contained in data-file.
When you invoke format with no options or with the -e, -l, -m, -M, or
-s options, the program displays a numbered list of available disks and
prompts you to specify a disk by list number. If the machine has more
than 10 disks, press SPACE to see the next screenful of disks.
You can specify a disk by list number even if the disk is not displayed
in the current screenful. For example, if the current screen shows
disks 11-20, you can enter 25 to specify the twenty-fifth disk on the
list. If you enter a number for a disk that is not currently displayed,
format prompts you to verify your selection. If you enter a number from
the displayed list, format silently accepts your selection.
After you specify a disk, format displays its main menu. This menu
enables you to perform the following tasks:
Run read, write, compare tests, and data purge. The data
purge function implements the National Computer Security
Center Guide to Understanding Data Remnance (NCSC-TG-025
version 2) Overwriting Algorithm. See NOTES.
Search for backup labels.
Enable, disable, and query the state of the write cache
and read cache. This menu item only appears when format is
invoked with the -e option, and is only supported on SCSI
Display the device name, the disk geometry, and the path‐
name to the disk device.
Retrieve and print defect lists. This option is supported
only on SCSI devices. IDE disks perform automatic defect
management. Upon using the defect option on an IDE disk,
you receive the message:
Controller does not support defect management
or disk supports automatic defect management.
Choose the disk that will be used in subsequent operations
(known as the current disk.)
Run the fdisk(1M) program to create a fdisk partition for
Solaris software (x86 based systems only).
Format and verify the current disk. This option is sup‐
ported only on SCSI devices. IDE disks are pre-formatted
by the manufacturer. Upon using the format option on an
IDE disk, you receive the message:
Cannot format this drive. Please use your
manufacturer-supplied formatting utility.
Display the vendor, product name, and revision level of
the current drive.
Write a new label to the current disk.
Create and modify slices.
Exit the format menu.
Repair a specific block on the disk.
Save new disk and slice information.
Select (define) a disk type.
Read and display labels. Print information such as the
number of cylinders, alternate cylinders, heads, sectors,
and the partition table.
Label the disk with a new eight character volume name.
a colon-separated list of filenames and/or directories
of disk and partition definitions. If a directory is
specified, format searches for the file format.dat in
default data file
SEE ALSOfmthard(1M), prtvtoc(1M), rmformat(1), format.dat(4), attributes(5),
When the format function is selected to format the Maxtor 207MB disk,
the following message displays:
Mode sense page(4) reports rpm value as 0, adjusting it to 3600
This is a drive bug that may also occur with older third party drives.
The above message is not an error; the drive will still function cor‐
Cylinder 0 contains the partition table (disk label), which can be
overwritten if used in a raw disk partition by third party software.
format supports writing EFI-compliant disk labels in order to support
disks or LUNs with capacities greater than one terabyte. However, care
should be exercised since many software components, such as filesystems
and volume managers, are still restricted to capacities of one terabyte
or less. See the System Administration Guide: Basic Administration for
By default, on an unlabeled disk, EFI labels will be written on disks
larger than 2 TB. When format is invoked with the -e option, on writing
the label, the label type can be chosen. Booting is not currently sup‐
ported on a disk with an EFI label.
format provides a help facility you can use whenever format is expect‐
ing input. You can request help about what information is expected by
simply entering a question mark (?) and format prints a brief descrip‐
tion of what type of input is needed. If you enter a ? at the menu
prompt, a list of available commands is displayed.
For SCSI disks, formatting is done with both Primary and Grown defects
list by default. However, if only Primary list is extracted in defect
menu before formatting, formatting will be done with Primary list only.
Changing the state of the caches is only supported on SCSI devices, and
not all SCSI devices support changing or saving the state of the
The NCSC-TG-025 algorithm for overwriting meets the DoD 5200.28-M (ADP
Security Manual) Eraser Procedures specification. The NIST Guidelines
for Media Sanitization (NIST SP 800-88) also reference this algorithm.
Sep 25, 2008 FORMAT(1M)