Glib::devel man page on ElementaryOS

Man page or keyword search:  
man Server   4994 pages
apropos Keyword Search (all sections)
Output format
ElementaryOS logo
[printable version]

devel(3pm)	      User Contributed Perl Documentation	    devel(3pm)

NAME
       Glib::devel - Binding developer's overview of Glib's internals

DESCRIPTION
       Do you need to know how the gtk2-perl language bindings work, or need
       to write your own language bindings for a Glib/Gtk2-based library?
       Then you've come to the right place.  If you are just a perl developer
       wanting to write programs with Glib or Gtk2, then this is probably way
       over your head.

       This document began its life as a post to gtk-perl-list about a
       redesign of the fundamentals of the bindings; today it is the reference
       documentation for the developers of the bindings.

       To reduce confusion, refer to GLib, the C library, with a capital L,
       and Glib the perl module with a lower-case l.  While the Gtk2 module is
       the primary client of Glib, it is not necessarily the only one; in
       fact, the perl bindings for the GStreamer library build directly atop
       Glib.  Therefore, this document describes just the GLib/Glib basics.
       For details on how Gtk2 extends upon the concepts presented here, see
       Gtk2::devel.

       In various places, we use the name GPerl to refer to the actual binding
       subsystem.

       In order to avoid getting very quickly out of date, this document
       doesn't go into great detail on APIs.  gperl.h is rather heavily
       commented, and should be considered the canonical source of correct API
       information.

Basic Philosophy
       GLib is a portability library for C programs, providing a common set of
       APIs and services on various platforms.	Along with that you get
       libgobject, which provides an inheritance-based type system and other
       spiffy things.

       Glib, as a perl module, must decide which portions of GLib's facilities
       to map to perl and which to abstract and encapsulate.

       In the grand scheme, the bindings have been designed with a few basic
       tenets in mind:

       -   Stick close to the C API, to allow a perl developer to use
	   knowledge from the C API and API reference docs with the perl
	   bindings; this is overruled in some places by the remaining tenets.

       -   Be perlish.	This is the most important.  The user of the perl
	   bindings should not have to worry about memory management,
	   reference counting, freeing objects, and all that stuff, else he
	   might as well go write in C instead.

       -   Leave out deprecated functionality.

       -   Don't add new functionality.	 The exceptions to this rule are
	   consolidation of methods where default parameters may be used, or
	   where the direct analog from C is not practical.

       -   Be lightweight.  As little indirection and bloat as possible.  If
	   possible, implement each toplevel module (e.g., Glib, Gtk2, Gnome2,
	   GtkHTML, etc) as one .pm and one .so.

       -   Be extensible.  Export header files and typemaps so that other
	   modules can easily chain off of our base.  Do not require the
	   entirely of Gtk2 for someone who needs only to build atop GObject.

The Glib Module
       In keeping with the tenet of not requiring the entire car for someone
       who only needs a single wheel, I broke the glib/gobject library family
       into its own module and namespace.  This has proved to be a godsend, as
       it has made things very easy to debug; there's a clean separation
       between the base of the type system and the stuff on top of it.

       The Glib module takes care of all the basic types handled by the
       GObject library --- GEnum, GFlags, GBoxed, GObject, GValue, GClosure
       --- as well has signal marshalling and such in GSignal.	I'll discuss
       each of these separately.

       In practice, you will rarely see direct calls to the functions that
       convert objects in and out of perl.  Most code should use the C
       preprocessor to provide easier-to-remember names that follow the perl
       API style, e.g., newSVGObject(obj) rather than
       gperl_new_object(type,obj) and SvGObject(sv) instead of
       gperl_get_gobject(type, sv).  The convention used in all of gtk2-perl
       is described in Gtk2::devel.

   Wrappers
       FIXME maybe this section should be rolled into the GBoxed and GObject
       sections?

       In order to use the C data structures from Perl, we need to wrap those
       objects up in Perl objects.  In general, a Perl object is simply a
       blessed reference.  A typical scheme for representing C objects in perl
       is bless a reference to a scalar holding the C pointer value; perl will
       destroy the reference-counted scalar when there are no more references
       to it, and one would normally destroy the underlying data structure at
       this point.  However, GLib is a little more complex than your typical C
       library, so this easy, typical setup won't work for us.

       GBoxed types are opaque wrappers for C structures, providing copy and
       free functions, to allow the types to be used generically.  For the
       most part we can get away with using the typical scheme described above
       to provide an opaque object, but in some instances an opaque object is
       very alien in perl.  The Glib::Boxed section explains how we get around
       this.

       GObject, on the other hand, is a type-aware, reference-counted object
       with lifetime semantics that differ somewhat from perl SVs.  Thus we
       need something a bit more sophisticated than a plain old opaque
       wrapper; in fact, we use a blessed hash reference with the pointer to
       the C object tucked away in attached magic, and a pointer to the SV
       stored in the GObject's user data.  The combined perl/C object does
       some nifty reference-count borrowing to ensure that object lifetime is
       managed correctly.

       If an object is created by a function that returns directly to perl,
       then the wrapper returned by that function should "own" the object.  If
       no other code assumes ownership of that object (by ref'ing a GObject or
       copying a GBoxed), then the object should be destroyed when the perl
       scalar is destroyed (actually, as part of its destruction).

       If a function returns a preexisting object owned by someone else, then
       the bindings should NOT destroy the object with the perl wrapper.  How
       we handle this for the various types is described below.

   GType to Package Mappings
       GType is the GObject library's unique type identifier; this is a
       runtime variable, because GLib types may be loaded dynamically.	The
       direct analog in perl is the package name, which uniquely specifies an
       object's class.	Since these do about the same thing, we completely
       replace the GType with the perl package.

       For various reasons, mostly to do with robustness and performance,
       there is a one-to-one mapping between GType classes and perl package
       names.  These must be registered, usually as part of the module
       initialization process.

       In addition, the type system tries as hard as it can to recover when
       things don't go well, using the GType system to its advantage.  If you
       return a C object of a type that is not registered with Gperl, such as
       MyCustomTypeFoo, gperl_new_object (see below) will warn you that it has
       blessed the unknown MyCustomTypeFoo into the first known package in its
       ancestry, Gtk2::VBox.

       GBoxed and GObject have distinct mapping registries to avoid cross-
       pollination and mistakes in the type system.  See below.

       To assist in handling inheritance that isn't specified directly by the
       GType system, the function gperl_set_isa allows you to add elements to
       the @ISA for a package.	gperl_register_object does this for you, but
       you may need to add additional parents, e.g., for implementing
       GInterfaces.  (see Gtk2/xs/GtkEntry.xs for an example)

       You may be thinking that we could use substitution rules to map the
       GObject classes to perl packages. In practice, this is a bad idea,
       fraught with problems; the substitution rules are not easily extendable
       and are easily broken by extension packages which don't follow the
       naming conventions.

   GEnums and GFlags
       GLib provides a mechanism for creating runtime type information about
       enumeration and flag types.  Enumerations are lists of specific values,
       one of which may be used at at time, whereas multiple flag values may
       be supplied at a time.  In C flags are meant to be used with bitfields.
       A GType is associated with the various valid values for a given GEnum
       or GFlags type as strings, in both full-name and nickname forms.

       GPerl uses this mechanism to avoid the need to know integer values for
       enum and flag types at the perl level.  An enum value is just a string;
       a bitfield of flag values is represented as a reference to an array of
       strings.	 These strings are the GLib-provided nicknames.	 For the
       convenience of a perl developer, the bindings treat '-' and '_' as
       equivalent when looking up the corresponding integer values during
       conversion.

       A GEnum or GFlags type mapping should be registered with

	void gperl_register_fundamental (GType gtype, const char * package);

       so that their package names can be used where a GType is required (for
       example, as GObject property types or GtkTreeModel column types).

       The basic functions for converting between C and perl values are

	/* croak if val is not part of type, otherwise return
	 * corresponding value.	 this is the general case. */
	gint gperl_convert_enum (GType type, SV * val);

	/* return a scalar which is the nickname of the enum value
	 * val, or croak if val is not a member of the enum. */
	SV * gperl_convert_back_enum (GType type, gint val);

	/* collapse a list of strings to an integer with all the
	 * correct bits set, croak if anything is invalid. */
	gint gperl_convert_flags (GType type, SV * val);

	/* convert a bitfield to a list of strings, or croak. */
	SV * gperl_convert_back_flags (GType type, gint val);

       Other utility functions allow for finer-grained control, such as the
       ability to pass unknown values, which can be necessary in special
       cases.  In general, each of these functions raises an exception when
       something goes wrong.  To be helpful, they croak with a message listing
       the valid values when they encounter invalid input.

   GBoxed
       GBoxed provides a way to register functions that create, copy, and
       destroy opaque structures.  For our purposes, we'll allow any perl
       package to inherit from Glib::Boxed and implement accessors for the
       struct members, but Glib::Boxed will handle the object and wrapper
       lifetime issues.

       There are two functions for creating boxed wrappers:

	SV * gperl_new_boxed (gpointer boxed, GType gtype, gboolean own);
	SV * gperl_new_boxed_copy (gpointer boxed, GType gtype);

       If own is TRUE, the wrapper returned by gperl_new_boxed will take boxed
       with it when it dies.  In the case of a copy, own is implied, so
       there's a separate function which doesn't need the own option.

       To get a boxed pointer out of a scalar wrapper, you just call
       gperl_get_boxed_check --- this will croak if the sv is undef or not
       blessed into the specified package.

       When you register a boxed type you get the option of supplying a table
       of function pointers describing how the boxed object should be wrapped,
       unwrapped, and destroyed.  This allows you to decide in the wrapping
       function what subclass of the boxed type's class the wrapper should
       actually take (a trick used by Gtk2::Gdk::Event), or represent a boxed
       type as a native perl type (such as using array references for
       Gnome2::Canvas::Point objects).	All of this happens automagically,
       behind the scenes, and most types assume the default wrapper class.

       See the commentary in gperl.h for more information.

   GObject
       The GObject knows its own type.	Thus, we need only one parameter to
       create a GObject wrapper.  In reality, we ask for two:

	SV * gperl_new_object (GObject * object, gboolean own);

       The wrapper SV will be blessed into the package corresponding to the
       gtype returned by G_OBJECT_TYPE (object), that is, the bottommost type
       in the inheritance chain.  If that bottommost type is not known, the
       function walks back up the tree until it finds one that's known,
       blesses the reference into that package, and spits out a warning on
       stderr.	To hush the warning, you need merely call

       In general, this process will claim a reference on the GObject (with
       g_object_ref()), so that the C object stays alive so long as there is a
       perl wrapper for it.  If <i>own</i> is set to TRUE, the perl wrapper
       will claim ownership of the C object by removing that reference; in
       theory, for a new GObject, fresh from a constructor, this leaves the
       object with a single reference owned by the perl object.	 The next
       question out of your mouth should be, "But what about GObject
       derivatives that require sinking or other strange methods to claim
       ownership?"  For the answer, see the GtkObject section's description of
       sink functions.

	void gperl_register_object (GType gtype, const char * package);

       This magical function also sets up the @ISA for the package to point to
       the package corresponding to g_type_parent (gtype).  [Since this
       requires the parent package to be registered, there is a simple
       deferral mechanism, which means your @ISA might not be set until the
       next call to gperl_register_object.]

       There are two ways to get an object out of an SV (though I think only
       one is really needed):

	GObject * gperl_get_object (SV * sv);
	GObject * gperl_get_object_check (SV * sv, GType gtype);

       The second one is like the first, but croaks if the object is not
       derived from gtype.

       You can get and set object data and object parameters just like you'd
       expect.

   GSignal
       All of this GObject stuff wouldn't be very useful if you couldn't
       connect signals and closures.  I got most of my handling code from
       gtk2-perl and pygtk, and it's pretty straightforward.  The data member
       is optional, and must be a scalar.

       To connect perl subroutines to GSignals I use GClosures, which require
       the handling of GValues.

   GPerlClosure
       Use a GPerlClosure wherever you could use a GClosure and things should
       work out great.	FIXME say more here

   GPerlCallback
       Function pointers are required in many places throughout gtk+, usually
       for a callback to be used as a "foreach" function or for some other
       purpose.	 Unfortunately, a majority of these spots aren't designed to
       work with GClosures (usually by lacking a way to destroy data
       associated with the callback when it is no longer needed).  For this
       purpose, the GPerlCallback wraps up the gruntwork of using perl's
       call_sv to use a callback function directly.

SEE ALSO
       perl(1), perlxs(1), perlguts(1), perlapi(1), perlxstut(1),
       ExtUtils::Depends(3pm), ExtUtils::PkgConfig(3pm) Glib(3pm),
       Glib::Object::Subclass(3pm), Glib::xsapi(3pm)

AUTHOR
       muppet <scott at asofyet.org>

COPYRIGHT
       Copyright (C) 2003 by the gtk2-perl team (see the file AUTHORS for the
       full list)

       This library is free software; you can redistribute it and/or modify it
       under the terms of the GNU Library General Public License as published
       by the Free Software Foundation; either version 2.1 of the License, or
       (at your option) any later version.

       This library is distributed in the hope that it will be useful, but
       WITHOUT ANY WARRANTY; without even the implied warranty of
       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
       Library General Public License for more details.

       You should have received a copy of the GNU Library General Public
       License along with this library; if not, write to the Free Software
       Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
       02110-1301 USA.

perl v5.18.1			  2012-01-06			    devel(3pm)
[top]

List of man pages available for ElementaryOS

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
...................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net