Net::LDAP(3) User Contributed Perl Documentation Net::LDAP(3)NAMENet::LDAP - Lightweight Directory Access Protocol
SYNOPSIS
use Net::LDAP;
$ldap = Net::LDAP->new( 'ldap.bigfoot.com' ) or die "$@";
$mesg = $ldap->bind ; # an anonymous bind
$mesg = $ldap->search( # perform a search
base => "c=US",
filter => "(&(sn=Barr) (o=Texas Instruments))"
);
$mesg->code && die $mesg->error;
foreach $entry ($mesg->entries) { $entry->dump; }
$mesg = $ldap->unbind; # take down session
$ldap = Net::LDAP->new( 'ldap.umich.edu' );
# bind to a directory with dn and password
$mesg = $ldap->bind( 'cn=root, o=University of Michigan, c=us',
password => 'secret'
);
$result = $ldap->add( 'cn=Barbara Jensen, o=University of Michigan, c=US',
attr => [
'cn' => ['Barbara Jensen', 'Barbs Jensen'],
'sn' => 'Jensen',
'mail' => 'b.jensen@umich.edu',
'objectclass' => ['top', 'person',
'organizationalPerson',
'inetOrgPerson' ],
]
);
$result->code && warn "failed to add entry: ", $result->error ;
$mesg = $ldap->unbind; # take down session
DESCRIPTIONNet::LDAP is a collection of modules that implements a LDAP services
API for Perl programs. The module may be used to search directories or
perform maintenance functions such as adding, deleting or modifying
entries.
This document assumes that the reader has some knowledge of the LDAP
protocol.
CONSTRUCTOR
new ( HOST, OPTIONS )
Creates a new Net::LDAP object and opens a connection to the named
host.
"HOST" may be a host name or an IP number. TCP port may be
specified after the host name followed by a colon (such as
localhost:10389). The default TCP port for LDAP is 389.
You can also specify a URI, such as 'ldaps://127.0.0.1:666' or
'ldapi://%2fvar%2flib%2fldap_sock'. Note that '%2f's in the LDAPI
socket path will be translated into '/'. This is to support LDAP
query options like base, search etc. although the query part of the
URI will be ignored in this context. If port was not specified in
the URI, the default is either 389 or 636 for 'LDAP' and 'LDAPS'
schemes respectively.
"HOST" may also be a reference to an array of hosts, host-port
pairs or URIs to try. Each will be tried in order until a
connection is made. Only when all have failed will the result of
"undef" be returned.
port => N
Port to connect to on the remote server. May be overridden by
"HOST".
scheme => 'ldap' | 'ldaps' | 'ldapi'
Connection scheme to use when not using an URI as "HOST".
(Default: ldap)
timeout => N
Timeout passed to IO::Socket when connecting the remote server.
(Default: 120)
multihomed => N
Will be passed to IO::Socket as the "MultiHomed" parameter when
connecting to the remote server
localaddr => HOST
Will be passed to IO::Socket as the "LocalAddr" parameter,
which sets the client's IP address (as opposed to the server's
IP address.)
debug => N
Set the debug level. See the debug method for details.
async => 1
Perform all operations asynchronously.
onerror => 'die' | 'warn' | undef | sub { ... }
In synchronous mode, change what happens when an error is
detected.
'die'
Net::LDAP will croak whenever an error is detected.
'warn'
Net::LDAP will warn whenever an error is detected.
undef
Net::LDAP will warn whenever an error is detected and "-w"
is in effect. The method that was called will return
"undef".
sub { ... }
The given sub will be called in a scalar context with a
single argument, the result message. The value returned
will be the return value for the method that was called.
version => N
Set the protocol version being used (default is LDAPv3). This
is useful if you want to talk to an old server and therefore
have to use LDAPv2.
raw => REGEX
Use REGEX to denote the names of attributes that are to be
considered binary in search results.
When running on Perl 5.8 and this option is given Net::LDAP
converts all values of attributes not matching this REGEX into
Perl UTF-8 strings so that the regular Perl operators (pattern
matching, ...) can operate as one expects even on strings with
international characters.
If this option is not given or the version of Perl Net::LDAP is
running on is too old strings are encoded the same as in
earlier versions of perl-ldap.
Example: raw => qr/(?i:^jpegPhoto|;binary)/
inet6 => N
Try to connect to the server using IPv6 if "HOST" resolves to
an IPv6 target address. If it resolves to an IPv4 address, the
connection is tried using IPv4, the same way as if this option
was not given.
Please note that IPv6 support is considered experimental in
IO::Socket::SSL, which is used of SSL/TLS support, and there
are a few issues to take care of. See "IPv6" in IO::Socket::SSL
for details.
Example
$ldap = Net::LDAP->new( 'remote.host', async => 1 );
LDAPS connections have some extra valid options, see the start_tls
method for details. Note the default value for 'sslversion' for
LDAPS is 'sslv2/3', and the default port for LDAPS is 636.
For LDAPI connections, HOST is actually the location of a UNIX
domain socket to connect to. The default location is
'/var/run/ldapi'.
METHODS
Each of the following methods take as arguments some number of fixed
parameters followed by options, these options are passed in a named
fashion, for example
$mesg = $ldap->bind( "cn=me,o=example", password => "mypasswd");
The return value from these methods is an object derived from the
Net::LDAP::Message class. The methods of this class allow you to
examine the status of the request.
abandon ( ID, OPTIONS )
Abandon a previously issued request. "ID" may be a number or an
object which is a sub-class of Net::LDAP::Message, returned from a
previous method call.
control => CONTROL
control => [ CONTROL, ... ]
See "CONTROLS" below
callback => CALLBACK
See "CALLBACKS" below
Example
$res = $ldap->search( @search_args );
$mesg = $ldap->abandon( $res ); # This could be written as $res->abandon
add ( DN, OPTIONS )
Add a new entry to the directory. "DN" can be either a
Net::LDAP::Entry object or a string.
attrs => [ ATTR => VALUE, ... ]
"VALUE" should be a string if only a single value is wanted, or
a reference to an array of strings if multiple values are
wanted.
This argument is not used if "DN" is a Net::LDAP::Entry object.
control => CONTROL
control => [ CONTROL, ... ]
See "CONTROLS" below
callback => CALLBACK
See "CALLBACKS" below
Example
# $entry is an object of class Net::LDAP::Entry
$mesg = $ldap->add( $entry );
$mesg = $ldap->add( $dn,
attrs => [
name => 'Graham Barr',
attr => 'value1',
attr => 'value2',
multi => [qw(value1 value2)]
]
);
bind ( DN, OPTIONS )
Bind (log in) to the server. "DN" is the DN to bind with. An
anonymous bind may be done by calling bind without any arguments.
control => CONTROL
control => [ CONTROL, ... ]
See "CONTROLS" below
callback => CALLBACK
See "CALLBACKS" below
noauth | anonymous => 1
Bind without any password. The value passed with this option is
ignored.
password => PASSWORD
Bind with the given password.
sasl => SASLOBJ
Bind using a SASL mechanism. The argument given should be a
sub-class of Authen::SASL.
Example
$mesg = $ldap->bind; # Anonymous bind
$mesg = $ldap->bind( $dn, password => $password );
# $sasl is an object of class Authen::SASL
$mesg = $ldap->bind( $dn, sasl => $sasl, version => 3 );
compare ( DN, OPTIONS )
Compare values in an attribute in the entry given by "DN" on the
server. "DN" may be a string or a Net::LDAP::Entry object.
attr => ATTR
The name of the attribute to compare.
value => VALUE
The value to compare with.
control => CONTROL
control => [ CONTROL, ... ]
See "CONTROLS" below.
callback => CALLBACK
See "CALLBACKS" below.
Example
$mesg = $ldap->compare( $dn,
attr => 'cn',
value => 'Graham Barr'
);
delete ( DN, OPTIONS )
Delete the entry given by "DN" from the server. "DN" may be a
string or a Net::LDAP::Entry object.
control => CONTROL
control => [ CONTROL, ... ]
See "CONTROLS" below.
callback => CALLBACK
See "CALLBACKS" below.
Example
$mesg = $ldap->delete( $dn );
moddn ( DN, OPTIONS )
Rename the entry given by "DN" on the server. "DN" may be a string
or a Net::LDAP::Entry object.
newrdn => RDN
This value should be a new RDN to assign to "DN".
deleteoldrdn => 1
This option should be passwd if the existing RDN is to be
deleted.
newsuperior => NEWDN
If given this value should be the DN of the new superior for
"DN".
control => CONTROL
control => [ CONTROL, ... ]
See "CONTROLS" below.
callback => CALLBACK
See "CALLBACKS" below.
Example
$mesg = $ldap->moddn( $dn, newrdn => 'cn=Graham Barr' );
modify ( DN, OPTIONS )
Modify the contents of the entry given by "DN" on the server. "DN"
may be a string or a Net::LDAP::Entry object.
add => { ATTR => VALUE, ... }
Add more attributes or values to the entry. "VALUE" should be a
string if only a single value is wanted in the attribute, or a
reference to an array of strings if multiple values are wanted.
delete => [ ATTR, ... ]
Delete complete attributes from the entry.
delete => { ATTR => VALUE, ... }
Delete individual values from an attribute. "VALUE" should be a
string if only a single value is being deleted from the
attribute, or a reference to an array of strings if multiple
values are being deleted.
replace => { ATTR => VALUE, ... }
Replace any existing values in each given attribute with
"VALUE". "VALUE" should be a string if only a single value is
wanted in the attribute, or a reference to an array of strings
if multiple values are wanted. A reference to an empty array
will remove the entire attribute.
increment => { ATTR => VALUE, ... }
Atomically increment the existing value in each given attribute
by the provided "VALUE". The attributes need to have integer
syntax, or be otherwise "incrementable". Note this will only
work if the server advertizes support for
LDAP_FEATURE_MODIFY_INCREMENT. Use "supported_feature" in
Net::LDAP::RootDSE to check this.
changes => [ OP => [ ATTR => VALUE ], ... ]
This is an alternative to add, delete, replace and increment
where the whole operation can be given in a single argument.
"OP" should be add, delete, replace or increment. "VALUE"
should be either a string or a reference to an array of
strings, as before.
Use this form if you want to control the order in which the
operations will be performed.
control => CONTROL
control => [ CONTROL, ... ]
See "CONTROLS" below.
callback => CALLBACK
See "CALLBACKS" below.
Example
$mesg = $ldap->modify( $dn, add => { sn => 'Barr' } );
$mesg = $ldap->modify( $dn, delete => [qw(faxNumber)] );
$mesg = $ldap->modify( $dn, delete => { 'telephoneNumber' => '911' } );
$mesg = $ldap->modify( $dn, replace => { 'mail' => 'gbarr@pobox.com' } );
$mesg = $ldap->modify( $dn,
changes => [
# add sn=Barr
add => [ sn => 'Barr' ],
# delete all fax numbers
delete => [ faxNumber => []],
# delete phone number 911
delete => [ telephoneNumber => ['911']],
# change email address
replace => [ mail => 'gbarr@pobox.com']
]
);
search ( OPTIONS )
Search the directory using a given filter. This can be used to
read attributes from a single entry, from entries immediately below
a particular entry, or a whole subtree of entries.
The result is an object of class Net::LDAP::Search.
base => DN
The DN that is the base object entry relative to which the
search is to be performed.
scope => 'base' | 'one' | 'sub'
By default the search is performed on the whole tree below the
specified base object. This maybe changed by specifying a
"scope" parameter with one of the following values:
base
Search only the base object.
one Search the entries immediately below the base object.
sub Search the whole tree below (and including) the base
object. This is the default.
deref => 'never' | 'search' | 'find' | 'always'
By default aliases are dereferenced to locate the base object
for the search, but not when searching subordinates of the base
object. This may be changed by specifying a "deref" parameter
with one of the following values:
never
Do not dereference aliases in searching or in locating the
base object of the search.
search
Dereference aliases in subordinates of the base object in
searching, but not in locating the base object of the
search.
find
Dereference aliases in locating the base object of the
search, but not when searching subordinates of the base
object. This is the default.
always
Dereference aliases both in searching and in locating the
base object of the search.
sizelimit => N
A sizelimit that restricts the maximum number of entries to be
returned as a result of the search. A value of 0, and the
default, means that no restriction is requested. Servers may
enforce a maximum number of entries to return.
timelimit => N
A timelimit that restricts the maximum time (in seconds)
allowed for a search. A value of 0 (the default), means that no
timelimit will be requested.
typesonly => 1
Only attribute types (no values) should be returned. Normally
attribute types and values are returned.
filter => FILTER
A filter that defines the conditions an entry in the directory
must meet in order for it to be returned by the search. This
may be a string or a Net::LDAP::Filter object. Values inside
filters may need to be escaped to avoid security problems; see
Net::LDAP::Filter for a definition of the filter format,
including the escaping rules.
attrs => [ ATTR, ... ]
A list of attributes to be returned for each entry that matches
the search filter.
If not specified, then the server will return the attributes
that are specified as accessible by default given your bind
credentials.
Certain additional attributes such as "createTimestamp" and
other operational attributes may also be available for the
asking:
$mesg = $ldap->search( ... ,
attrs => ['createTimestamp']
);
To retrieve the default attributes and additional ones, use
'*'.
$mesg = $ldap->search( ... ,
attrs => ['*', 'createTimestamp']
);
To retrieve no attributes (the server only returns the DNs of
matching entries), use '1.1':
$mesg = $ldap->search( ... ,
attrs => ['1.1']
);
control => CONTROL
control => [ CONTROL, ... ]
See "CONTROLS" below.
callback => CALLBACK
See "CALLBACKS" below.
raw => REGEX
Use REGEX to denote the names of attributes that are to be
considered binary in search results.
When running on Perl 5.8 and this option is given Net::LDAP
converts all values of attributes not matching this REGEX into
Perl UTF-8 strings so that the regular Perl operators (pattern
matching, ...) can operate as one expects even on strings with
international characters.
If this option is not given or the version of Perl Net::LDAP is
running on is too old strings are encodeed the same as in
earlier versions of perl-ldap.
The value provided here overwrites the value inherited from the
constructor.
Example: raw => qr/(?i:^jpegPhoto|;binary)/
Example
$mesg = $ldap->search(
base => $base_dn,
scope => 'sub',
filter => '(|(objectclass=rfc822mailgroup)(sn=jones))'
);
Net::LDAP::LDIF->new( \*STDOUT,"w" )->write( $mesg->entries );
start_tls ( OPTIONS )
Calling this method will convert the existing connection to using
Transport Layer Security (TLS), which provides an encrypted
connection. This is only possible if the connection uses LDAPv3,
and requires that the server advertizes support for
LDAP_EXTENSION_START_TLS. Use "supported_extension" in
Net::LDAP::RootDSE to check this.
verify => 'none' | 'optional' | 'require'
How to verify the server's certificate:
none
The server may provide a certificate but it will not be
checked - this may mean you are be connected to the wrong
server
optional
Verify only when the server offers a certificate
require
The server must provide a certificate, and it must be
valid.
If you set verify to optional or require, you must also set
either cafile or capath. The most secure option is require.
sslversion => 'sslv2' | 'sslv3' | 'sslv2/3' | 'tlsv1'
This defines the version of the SSL/TLS protocol to use.
Defaults to 'tlsv1'.
ciphers => CIPHERS
Specify which subset of cipher suites are permissible for this
connection, using the standard OpenSSL string format. The
default value is 'ALL', which permits all ciphers, even those
that don't encrypt.
clientcert => '/path/to/cert.pem'
clientkey => '/path/to/key.pem'
keydecrypt => sub { ... }
If you want to use the client to offer a certificate to the
server for SSL authentication (which is not the same as for the
LDAP Bind operation) then set clientcert to the user's
certificate file, and clientkey to the user's private key file.
These files must be in PEM format.
If the private key is encrypted (highly recommended) then
keydecrypt should be a subroutine that returns the decrypting
key. For example:
$ldap = Net::LDAP->new( 'myhost.example.com', version => 3 );
$mesg = $ldap->start_tls(
verify => 'require',
clientcert => 'mycert.pem',
clientkey => 'mykey.pem',
keydecrypt => sub { 'secret'; },
capath => '/usr/local/cacerts/'
);
capath => '/path/to/servercerts/'
cafile => '/path/to/servercert.pem'
When verifying the server's certificate, either set capath to
the pathname of the directory containing CA certificates, or
set cafile to the filename containing the certificate of the CA
who signed the server's certificate. These certificates must
all be in PEM format.
The directory in 'capath' must contain certificates named using
the hash value of the certificates' subject names. To generate
these names, use OpenSSL like this in Unix:
ln -s cacert.pem `openssl x509 -hash -noout < cacert.pem`.0
(assuming that the certificate of the CA is in cacert.pem.)
checkcrl => 1
If capath has been configured, then it will also be searched
for certificate revocation lists (CRLs) when verifying the
server's certificate. The CRLs' names must follow the form
hash.rnum where hash is the hash over the issuer's DN and num
is a number starting with 0.
See "SSL_check_crl" in IO::Socket::SSL for further information.
unbind ( )
The unbind method does not take any parameters and will unbind you
from the server. Some servers may allow you to re-bind or perform
other operations after unbinding. If you wish to switch to another
set of credentials while continuing to use the same connection, re-
binding with another DN and password, without unbind-ing, will
generally work.
Example
$mesg = $ldap->unbind;
The following methods are for convenience, and do not return
"Net::LDAP::Message" objects.
async ( VALUE )
If "VALUE" is given the async mode will be set. The previous value
will be returned. The value is true if LDAP operations are being
performed asynchronously.
certificate ( )
Returns an X509_Certificate object containing the server's
certificate. See the IO::Socket::SSL documentation for information
about this class.
For example, to get the subject name (in a peculiar OpenSSL-
specific format, different from RFC 1779 and RFC 2253) from the
server's certificate, do this:
print "Subject DN: " . $ldaps->certificate->subject_name . "\n";
cipher ( )
Returns the cipher mode being used by the connection, in the string
format used by OpenSSL.
debug ( VALUE )
If "VALUE" is given the debug bit-value will be set. The previous
value will be returned. Debug output will be sent to "STDERR". The
bits of this value are:
1 Show outgoing packets (using asn_hexdump).
2 Show incoming packets (using asn_hexdump).
4 Show outgoing packets (using asn_dump).
8 Show incoming packets (using asn_dump).
The default value is 0.
disconnect ( )
Disconnect from the server
root_dse ( OPTIONS )
The root_dse method retrieves cached information from the server's
rootDSE.
attrs => [ ATTR, ... ]
A reference to a list of attributes to be returned. If not
specified, then the following attributes will be requested
subschemaSubentry
namingContexts
altServer
supportedExtension
supportedFeatures
supportedControl
supportedSASLMechanisms
supportedLDAPVersion
The result is an object of class Net::LDAP::RootDSE.
Example
my $root = $ldap->root_dse;
# get naming Context
$root->get_value( 'namingContext', asref => 1 );
# get supported LDAP versions
$root->supported_version;
As the root DSE may change in certain circumstances - for instance
when you change the connection using start_tls - you should always
use the root_dse method to return the most up-to-date copy of the
root DSE.
schema ( OPTIONS )
Read schema information from the server.
The result is an object of class Net::LDAP::Schema. Read this
documentation for further information about methods that can be
performed with this object.
dn => DN
If a DN is supplied, it will become the base object entry from
which the search for schema information will be conducted. If
no DN is supplied the base object entry will be determined from
the rootDSE entry.
Example
my $schema = $ldap->schema;
# get objectClasses
@ocs = $schema->all_objectclasses;
# Get the attributes
@atts = $schema->all_attributes;
socket ( )
Returns the underlying "IO::Socket" object being used.
host ( )
Returns the host to which the connection was established. For
LDAPI connections the socket path is returned.
port ( )
Returns the the port connected to or "undef" in case of LDAPI
connections.
uri ( )
Returns the URI connected to.
As the value returned is that element of the constructor's HOST
argument with which the connection was established this may or may
not be a legal URI.
scheme ( )
Returns the scheme of the connection. One of ldap, ldaps or ldapi.
sync ( MESG )
Wait for a given "MESG" request to be completed by the server. If
no "MESG" is given, then wait for all outstanding requests to be
completed.
Returns an error code defined in Net::LDAP::Constant.
process ( MESG )
Process any messages that the server has sent, but do not block. If
"MESG" is specified then return as soon as "MESG" has been
processed.
Returns an error code defined in Net::LDAP::Constant.
version ( )
Returns the version of the LDAP protocol that is being used.
CONTROLS
Many of the methods described above accept a control option. This
allows the user to pass controls to the server as described in LDAPv3.
A control is a reference to a HASH and should contain the three
elements below. If any of the controls are blessed then the method
"to_asn" will be called which should return a reference to a HASH
containing the three elements described below.
For most purposes Net::LDAP::Control objects are the easiest way to
generate controls.
type => OID
This element must be present and is the name of the type of control
being requested.
critical => FLAG
critical is optional and should be a boolean value, if it is not
specified then it is assumed to be false.
value => VALUE
If the control being requested requires a value then this element
should hold the value for the server.
CALLBACKS
Most of the above commands accept a callback option. This option should
be a reference to a subroutine. This subroutine will be called for each
packet received from the server as a response to the request sent.
When the subroutine is called the first argument will be the
Net::LDAP::Message object which was returned from the method.
If the request is a search then multiple packets can be received from
the server. Each entry is received as a separate packet. For each of
these the subroutine will be called with a Net::LDAP::Entry object as
the second argument.
During a search the server may also send a list of references. When
such a list is received then the subroutine will be called with a
Net::LDAP::Reference object as the second argument.
LDAP ERROR CODESNet::LDAP also exports constants for the error codes that can be
received from the server, see Net::LDAP::Constant.
SEE ALSO
Net::LDAP::Constant, Net::LDAP::Control, Net::LDAP::Entry,
Net::LDAP::Filter, Net::LDAP::Message, Net::LDAP::Reference,
Net::LDAP::Search, Net::LDAP::RFC
The homepage for the perl-ldap modules can be found at
http://ldap.perl.org/.
ACKNOWLEDGEMENTS
This document is based on a document originally written by Russell
Fulton <r.fulton@auckland.ac.nz>.
Chris Ridd <chris.ridd@isode.com> for the many hours spent testing and
contribution of the ldap* command line utilities.
MAILING LIST
A discussion mailing list is hosted by the Perl Foundation at
<perl-ldap@perl.org> No subscription is necessary!
BUGS
We hope you do not find any, but if you do please report them to the
mailing list.
If you have a patch, please send it as an attachment to the mailing
list.
AUTHOR
Graham Barr <gbarr@pobox.com>
COPYRIGHT
Copyright (c) 1997-2004 Graham Barr. All rights reserved. This program
is free software; you can redistribute it and/or modify it under the
same terms as Perl itself.
perl v5.10.0 2008-08-28 Net::LDAP(3)
