TAR man page on Archlinux

Man page or keyword search:  
man Server   11224 pages
apropos Keyword Search (all sections)
Output format
Archlinux logo
[printable version]

TAR(1)			  BSD General Commands Manual			TAR(1)

NAME
     tar — manipulate tape archives

SYNOPSIS
     tar [bundled-flags ⟨args⟩] [⟨file⟩ | ⟨pattern⟩ ...]
     tar {-c} [options] [files | directories]
     tar {-r | -u} -f archive-file [options] [files | directories]
     tar {-t | -x} [options] [patterns]

DESCRIPTION
     tar creates and manipulates streaming archive files.  This implementation
     can extract from tar, pax, cpio, zip, jar, ar, xar, rpm, 7-zip, and ISO
     9660 cdrom images and can create tar, pax, cpio, ar, zip, 7-zip, and shar
     archives.

     The first synopsis form shows a “bundled” option word.  This usage is
     provided for compatibility with historical implementations.  See COMPATI‐
     BILITY below for details.

     The other synopsis forms show the preferred usage.	 The first option to
     tar is a mode indicator from the following list:
     -c	     Create a new archive containing the specified items.  The long
	     option form is --create.
     -r	     Like -c, but new entries are appended to the archive.  Note that
	     this only works on uncompressed archives stored in regular files.
	     The -f option is required.	 The long option form is --append.
     -t	     List archive contents to stdout.  The long option form is --list.
     -u	     Like -r, but new entries are added only if they have a modifica‐
	     tion date newer than the corresponding entry in the archive.
	     Note that this only works on uncompressed archives stored in reg‐
	     ular files.  The -f option is required.  The long form is
	     --update.
     -x	     Extract to disk from the archive.	If a file with the same name
	     appears more than once in the archive, each copy will be
	     extracted, with later copies overwriting (replacing) earlier
	     copies.  The long option form is --extract.

     In -c, -r, or -u mode, each specified file or directory is added to the
     archive in the order specified on the command line.  By default, the con‐
     tents of each directory are also archived.

     In extract or list mode, the entire command line is read and parsed
     before the archive is opened.  The pathnames or patterns on the command
     line indicate which items in the archive should be processed.  Patterns
     are shell-style globbing patterns as documented in tcsh(1).

OPTIONS
     Unless specifically stated otherwise, options are applicable in all oper‐
     ating modes.

     @archive
	     (c and r mode only) The specified archive is opened and the
	     entries in it will be appended to the current archive.  As a sim‐
	     ple example,
		   tar -c -f - newfile @original.tar
	     writes a new archive to standard output containing a file newfile
	     and all of the entries from original.tar.	In contrast,
		   tar -c -f - newfile original.tar
	     creates a new archive with only two entries.  Similarly,
		   tar -czf - --format pax @-
	     reads an archive from standard input (whose format will be deter‐
	     mined automatically) and converts it into a gzip-compressed pax-
	     format archive on stdout.	In this way, tar can be used to con‐
	     vert archives from one format to another.

     -a, --auto-compress
	     (c mode only) Use the archive suffix to decide a set of the for‐
	     mat and the compressions.	As a simple example,
		   tar -a -cf archive.tgz source.c source.h
	     creates a new archive with restricted pax format and gzip com‐
	     pression,
		   tar -a -cf archive.tar.bz2.uu source.c source.h
	     creates a new archive with restricted pax format and bzip2 com‐
	     pression and uuencode compression,
		   tar -a -cf archive.zip source.c source.h
	     creates a new archive with zip format,
		   tar -a -jcf archive.tgz source.c source.h
	     ignores the “-j” option, and creates a new archive with
	     restricted pax format and gzip compression,
		   tar -a -jcf archive.xxx source.c source.h
	     if it is unknown suffix or no suffix, creates a new archive with
	     restricted pax format and bzip2 compression.

     -B, --read-full-blocks
	     Ignored for compatibility with other tar(1) implementations.

     -b blocksize, --block-size blocksize
	     Specify the block size, in 512-byte records, for tape drive I/O.
	     As a rule, this argument is only needed when reading from or
	     writing to tape drives, and usually not even then as the default
	     block size of 20 records (10240 bytes) is very common.

     -C directory, --cd directory, --directory directory
	     In c and r mode, this changes the directory before adding the
	     following files.  In x mode, change directories after opening the
	     archive but before extracting entries from the archive.

     --chroot
	     (x mode only) chroot() to the current directory after processing
	     any -C options and before extracting any files.

     --disable-copyfile
	     Mac OS X specific.	 Disable the use of copyfile(3).

     --exclude pattern
	     Do not process files or directories that match the specified pat‐
	     tern.  Note that exclusions take precedence over patterns or
	     filenames specified on the command line.

     --format format
	     (c, r, u mode only) Use the specified format for the created ar‐
	     chive.  Supported formats include “cpio”, “pax”, “shar”, and
	     “ustar”.  Other formats may also be supported; see
	     libarchive-formats(5) for more information about currently-sup‐
	     ported formats.  In r and u modes, when extending an existing ar‐
	     chive, the format specified here must be compatible with the for‐
	     mat of the existing archive on disk.

     -f file, --file file
	     Read the archive from or write the archive to the specified file.
	     The filename can be - for standard input or standard output.  The
	     default varies by system; on FreeBSD, the default is /dev/sa0; on
	     Linux, the default is /dev/st0.

     --gid id
	     Use the provided group id number.	On extract, this overrides the
	     group id in the archive; the group name in the archive will be
	     ignored.  On create, this overrides the group id read from disk;
	     if --gname is not also specified, the group name will be set to
	     match the group id.

     --gname name
	     Use the provided group name.  On extract, this overrides the
	     group name in the archive; if the provided group name does not
	     exist on the system, the group id (from the archive or from the
	     --gid option) will be used instead.  On create, this sets the
	     group name that will be stored in the archive; the name will not
	     be verified against the system group database.

     -H	     (c and r mode only) Symbolic links named on the command line will
	     be followed; the target of the link will be archived, not the
	     link itself.

     -h	     (c and r mode only) Synonym for -L.

     -I	     Synonym for -T.

     --help  Show usage.

     --hfsCompression
	     (x mode only) Mac OS X specific(v10.6 or later). Compress
	     extracted regular files with HFS+ compression.

     --include pattern
	     Process only files or directories that match the specified pat‐
	     tern.  Note that exclusions specified with --exclude take prece‐
	     dence over inclusions.  If no inclusions are explicitly speci‐
	     fied, all entries are processed by default.  The --include option
	     is especially useful when filtering archives.  For example, the
	     command
		   tar -c -f new.tar --include='*foo*' @old.tgz
	     creates a new archive new.tar containing only the entries from
	     old.tgz containing the string ‘foo’.

     -J, --xz
	     (c mode only) Compress the resulting archive with xz(1).  In
	     extract or list modes, this option is ignored.  Note that, unlike
	     other tar implementations, this implementation recognizes XZ com‐
	     pression automatically when reading archives.

     -j, --bzip, --bzip2, --bunzip2
	     (c mode only) Compress the resulting archive with bzip2(1).  In
	     extract or list modes, this option is ignored.  Note that, unlike
	     other tar implementations, this implementation recognizes bzip2
	     compression automatically when reading archives.

     -k, --keep-old-files
	     (x mode only) Do not overwrite existing files.  In particular, if
	     a file appears more than once in an archive, later copies will
	     not overwrite earlier copies.

     --keep-newer-files
	     (x mode only) Do not overwrite existing files that are newer than
	     the versions appearing in the archive being extracted.

     -L, --dereference
	     (c and r mode only) All symbolic links will be followed.  Nor‐
	     mally, symbolic links are archived as such.  With this option,
	     the target of the link will be archived instead.

     -l, --check-links
	     (c and r modes only) Issue a warning message unless all links to
	     each file are archived.

     --lrzip
	     (c mode only) Compress the resulting archive with lrzip(1).  In
	     extract or list modes, this option is ignored.

     --lzma  (c mode only) Compress the resulting archive with the original
	     LZMA algorithm.  Use of this option is discouraged and new ar‐
	     chives should be created with --xz instead.  Note that, unlike
	     other tar implementations, this implementation recognizes LZMA
	     compression automatically when reading archives.

     --lzop  (c mode only) Compress the resulting archive with lzop(1).	 In
	     extract or list modes, this option is ignored.

     -m, --modification-time
	     (x mode only) Do not extract modification time.  By default, the
	     modification time is set to the time stored in the archive.

     -n, --norecurse, --no-recursion
	     (c, r, u modes only) Do not recursively archive the contents of
	     directories.

     --newer date
	     (c, r, u modes only) Only include files and directories newer
	     than the specified date.  This compares ctime entries.

     --newer-mtime date
	     (c, r, u modes only) Like --newer, except it compares mtime
	     entries instead of ctime entries.

     --newer-than file
	     (c, r, u modes only) Only include files and directories newer
	     than the specified file.  This compares ctime entries.

     --newer-mtime-than file
	     (c, r, u modes only) Like --newer-than, except it compares mtime
	     entries instead of ctime entries.

     --nodump
	     (c and r modes only) Honor the nodump file flag by skipping this
	     file.

     --nopreserveHFSCompression
	     (x mode only) Mac OS X specific(v10.6 or later). Do not compress
	     extracted regular files which were compressed with HFS+ compres‐
	     sion before archived.  By default, compress the regular files
	     again with HFS+ compression.

     --null  (use with -I or -T) Filenames or patterns are separated by null
	     characters, not by newlines.  This is often used to read file‐
	     names output by the -print0 option to find(1).

     --no-same-owner
	     (x mode only) Do not extract owner and group IDs.	This is the
	     reverse of --same-owner and the default behavior if tar is run as
	     non-root.

     --no-same-permissions
	     (x mode only) Do not extract full permissions (SGID, SUID, sticky
	     bit, ACLs, extended attributes or extended file flags).  This is
	     the reverse of -p and the default behavior if tar is run as non-
	     root.

     --numeric-owner
	     This is equivalent to --uname "" --gname "".  On extract, it
	     causes user and group names in the archive to be ignored in favor
	     of the numeric user and group ids.	 On create, it causes user and
	     group names to not be stored in the archive.

     -O, --to-stdout
	     (x, t modes only) In extract (-x) mode, files will be written to
	     standard out rather than being extracted to disk.	In list (-t)
	     mode, the file listing will be written to stderr rather than the
	     usual stdout.

     -o	     (x mode) Use the user and group of the user running the program
	     rather than those specified in the archive.  Note that this has
	     no significance unless -p is specified, and the program is being
	     run by the root user.  In this case, the file modes and flags
	     from the archive will be restored, but ACLs or owner information
	     in the archive will be discarded.

     -o	     (c, r, u mode) A synonym for --format ustar

     --older date
	     (c, r, u modes only) Only include files and directories older
	     than the specified date.  This compares ctime entries.

     --older-mtime date
	     (c, r, u modes only) Like --older, except it compares mtime
	     entries instead of ctime entries.

     --older-than file
	     (c, r, u modes only) Only include files and directories older
	     than the specified file.  This compares ctime entries.

     --older-mtime-than file
	     (c, r, u modes only) Like --older-than, except it compares mtime
	     entries instead of ctime entries.

     --one-file-system
	     (c, r, and u modes) Do not cross mount points.

     --options options
	     Select optional behaviors for particular modules.	The argument
	     is a text string containing comma-separated keywords and values.
	     These are passed to the modules that handle particular formats to
	     control how those formats will behave.  Each option has one of
	     the following forms:
	     key=value
		     The key will be set to the specified value in every mod‐
		     ule that supports it.  Modules that do not support this
		     key will ignore it.
	     key     The key will be enabled in every module that supports it.
		     This is equivalent to key=1.
	     !key    The key will be disabled in every module that supports
		     it.
	     module:key=value, module:key, module:!key
		     As above, but the corresponding key and value will be
		     provided only to modules whose name matches module.
	     The currently supported modules and keys are:
	     iso9660:joliet
		     Support Joliet extensions.	 This is enabled by default,
		     use !joliet or iso9660:!joliet to disable.
	     iso9660:rockridge
		     Support Rock Ridge extensions.  This is enabled by
		     default, use !rockridge or iso9660:!rockridge to disable.
	     gzip:compression-level
		     A decimal integer from 1 to 9 specifying the gzip com‐
		     pression level.
	     gzip:timestamp
		     Store timestamp. This is enabled by default, use
		     !timestamp or gzip:!timestamp to disable.
	     lrzip:compression=type
		     Use type as compression method.  Supported values are
		     bzip2, gzip, lzo (ultra fast), and zpaq (best, extremely
		     slow).
	     lrzip:compression-level
		     A decimal integer from 1 to 9 specifying the lrzip com‐
		     pression level.
	     lzop:compression-level
		     A decimal integer from 1 to 9 specifying the lzop com‐
		     pression level.
	     xz:compression-level
		     A decimal integer from 0 to 9 specifying the xz compres‐
		     sion level.
	     mtree:keyword
		     The mtree writer module allows you to specify which mtree
		     keywords will be included in the output.  Supported key‐
		     words include: cksum, device, flags, gid, gname, indent,
		     link, md5, mode, nlink, rmd160, sha1, sha256, sha384,
		     sha512, size, time, uid, uname.  The default is equiva‐
		     lent to: “device, flags, gid, gname, link, mode, nlink,
		     size, time, type, uid, uname”.
	     mtree:all
		     Enables all of the above keywords.	 You can also use
		     mtree:!all to disable all keywords.
	     mtree:use-set
		     Enable generation of /set lines in the output.
	     mtree:indent
		     Produce human-readable output by indenting options and
		     splitting lines to fit into 80 columns.
	     zip:compression=type
		     Use type as compression method.  Supported values are
		     store (uncompressed) and deflate (gzip algorithm).
	     If a provided option is not supported by any module, that is a
	     fatal error.

     -P, --absolute-paths
	     Preserve pathnames.  By default, absolute pathnames (those that
	     begin with a / character) have the leading slash removed both
	     when creating archives and extracting from them.  Also, tar will
	     refuse to extract archive entries whose pathnames contain .. or
	     whose target directory would be altered by a symlink.  This
	     option suppresses these behaviors.

     -p, --insecure, --preserve-permissions
	     (x mode only) Preserve file permissions.  Attempt to restore the
	     full permissions, including owner, file modes, file flags and
	     ACLs, if available, for each item extracted from the archive.
	     This is the default, if tar is being run by root and can be over‐
	     ridden by also specifying --no-same-owner and
	     --no-same-permissions.

     --posix
	     (c, r, u mode only) Synonym for --format pax

     -q, --fast-read
	     (x and t mode only) Extract or list only the first archive entry
	     that matches each pattern or filename operand.  Exit as soon as
	     each specified pattern or filename has been matched.  By default,
	     the archive is always read to the very end, since there can be
	     multiple entries with the same name and, by convention, later
	     entries overwrite earlier entries.	 This option is provided as a
	     performance optimization.

     -S	     (x mode only) Extract files as sparse files.  For every block on
	     disk, check first if it contains only NULL bytes and seek over it
	     otherwise.	 This works similar to the conv=sparse option of dd.

     -s pattern
	     Modify file or archive member names according to pattern.	The
	     pattern has the format /old/new/[ghHprRsS] where old is a basic
	     regular expression, new is the replacement string of the matched
	     part, and the optional trailing letters modify how the replace‐
	     ment is handled.  If old is not matched, the pattern is skipped.
	     Within new, ~ is substituted with the match, \1 to \9 with the
	     content of the corresponding captured group.  The optional trail‐
	     ing g specifies that matching should continue after the matched
	     part and stop on the first unmatched pattern.  The optional
	     trailing s specifies that the pattern applies to the value of
	     symbolic links.  The optional trailing p specifies that after a
	     successful substitution the original path name and the new path
	     name should be printed to standard error.	Optional trailing H,
	     R, or S characters suppress substitutions for hardlink targets,
	     regular filenames, or symlink targets, respectively.  Optional
	     trailing h, r, or s characters enable substitutions for hardlink
	     targets, regular filenames, or symlink targets, respectively.
	     The default is hrs which applies substitutions to all names.  In
	     particular, it is never necessary to specify h, r, or s.

     --same-owner
	     (x mode only) Extract owner and group IDs.	 This is the reverse
	     of --no-same-owner and the default behavior if tar is run as
	     root.

     --strip-components count
	     Remove the specified number of leading path elements.  Pathnames
	     with fewer elements will be silently skipped.  Note that the
	     pathname is edited after checking inclusion/exclusion patterns
	     but before security checks.

     -T filename, --files-from filename
	     In x or t mode, tar will read the list of names to be extracted
	     from filename.  In c mode, tar will read names to be archived
	     from filename.  The special name “-C” on a line by itself will
	     cause the current directory to be changed to the directory speci‐
	     fied on the following line.  Names are terminated by newlines
	     unless --null is specified.  Note that --null also disables the
	     special handling of lines containing “-C”.	 Note:	If you are
	     generating lists of files using find(1), you probably want to use
	     -n as well.

     --totals
	     (c, r, u mode only) After archiving all files, print a summary to
	     stderr.

     -U, --unlink, --unlink-first
	     (x mode only) Unlink files before creating them.  This can be a
	     minor performance optimization if most files already exist, but
	     can make things slower if most files do not already exist.	 This
	     flag also causes tar to remove intervening directory symlinks
	     instead of reporting an error.  See the SECURITY section below
	     for more details.

     --uid id
	     Use the provided user id number and ignore the user name from the
	     archive.  On create, if --uname is not also specified, the user
	     name will be set to match the user id.

     --uname name
	     Use the provided user name.  On extract, this overrides the user
	     name in the archive; if the provided user name does not exist on
	     the system, it will be ignored and the user id (from the archive
	     or from the --uid option) will be used instead.  On create, this
	     sets the user name that will be stored in the archive; the name
	     is not verified against the system user database.

     --use-compress-program program
	     Pipe the input (in x or t mode) or the output (in c mode) through
	     program instead of using the builtin compression support.

     -v, --verbose
	     Produce verbose output.  In create and extract modes, tar will
	     list each file name as it is read from or written to the archive.
	     In list mode, tar will produce output similar to that of ls(1).
	     Additional -v options will provide additional detail.

     --version
	     Print version of tar and libarchive, and exit.

     -w, --confirmation, --interactive
	     Ask for confirmation for every action.

     -X filename, --exclude-from filename
	     Read a list of exclusion patterns from the specified file.	 See
	     --exclude for more information about the handling of exclusions.

     -y	     (c mode only) Compress the resulting archive with bzip2(1).  In
	     extract or list modes, this option is ignored.  Note that, unlike
	     other tar implementations, this implementation recognizes bzip2
	     compression automatically when reading archives.

     -Z, --compress, --uncompress
	     (c mode only) Compress the resulting archive with compress(1).
	     In extract or list modes, this option is ignored.	Note that,
	     unlike other tar implementations, this implementation recognizes
	     compress compression automatically when reading archives.

     -z, --gunzip, --gzip
	     (c mode only) Compress the resulting archive with gzip(1).	 In
	     extract or list modes, this option is ignored.  Note that, unlike
	     other tar implementations, this implementation recognizes gzip
	     compression automatically when reading archives.

ENVIRONMENT
     The following environment variables affect the execution of tar:

     TAR_READER_OPTIONS
		The default options for format readers and compression read‐
		ers.  The --options option overrides this.

     TAR_WRITER_OPTIONS
		The default options for format writers and compression writ‐
		ers.  The --options option overrides this.

     LANG	The locale to use.  See environ(7) for more information.

     TAPE	The default device.  The -f option overrides this.  Please see
		the description of the -f option above for more details.

     TZ		The timezone to use when displaying dates.  See environ(7) for
		more information.

EXIT STATUS
     The tar utility exits 0 on success, and >0 if an error occurs.

EXAMPLES
     The following creates a new archive called file.tar.gz that contains two
     files source.c and source.h:
	   tar -czf file.tar.gz source.c source.h

     To view a detailed table of contents for this archive:
	   tar -tvf file.tar.gz

     To extract all entries from the archive on the default tape drive:
	   tar -x

     To examine the contents of an ISO 9660 cdrom image:
	   tar -tf image.iso

     To move file hierarchies, invoke tar as
	   tar -cf - -C srcdir . | tar -xpf - -C destdir
     or more traditionally
	   cd srcdir ; tar -cf - . | (cd destdir ; tar -xpf -)

     In create mode, the list of files and directories to be archived can also
     include directory change instructions of the form -Cfoo/baz and archive
     inclusions of the form @archive-file.  For example, the command line
	   tar -c -f new.tar foo1 @old.tgz -C/tmp foo2
     will create a new archive new.tar.	 tar will read the file foo1 from the
     current directory and add it to the output archive.  It will then read
     each entry from old.tgz and add those entries to the output archive.
     Finally, it will switch to the /tmp directory and add foo2 to the output
     archive.

     An input file in mtree(5) format can be used to create an output archive
     with arbitrary ownership, permissions, or names that differ from existing
     data on disk:

	   $ cat input.mtree
	   #mtree
	   usr/bin uid=0 gid=0 mode=0755 type=dir
	   usr/bin/ls uid=0 gid=0 mode=0755 type=file content=myls
	   $ tar -cvf output.tar @input.mtree

     The --newer and --newer-mtime switches accept a variety of common date
     and time specifications, including “12 Mar 2005 7:14:29pm”, “2005-03-12
     19:14”, “5 minutes ago”, and “19:14 PST May 1”.

     The --options argument can be used to control various details of archive
     generation or reading.  For example, you can generate mtree output which
     only contains type, time, and uid keywords:
	   tar -cf file.tar --format=mtree --options='!all,type,time,uid' dir
     or you can set the compression level used by gzip or xz compression:
	   tar -czf file.tar --options='compression-level=9'.
     For more details, see the explanation of the archive_read_set_options()
     and archive_write_set_options() API calls that are described in
     archive_read(3) and archive_write(3).

COMPATIBILITY
     The bundled-arguments format is supported for compatibility with historic
     implementations.  It consists of an initial word (with no leading - char‐
     acter) in which each character indicates an option.  Arguments follow as
     separate words.  The order of the arguments must match the order of the
     corresponding characters in the bundled command word.  For example,
	   tar tbf 32 file.tar
     specifies three flags t, b, and f.	 The b and f flags both require argu‐
     ments, so there must be two additional items on the command line.	The 32
     is the argument to the b flag, and file.tar is the argument to the f
     flag.

     The mode options c, r, t, u, and x and the options b, f, l, m, o, v, and
     w comply with SUSv2.

     For maximum portability, scripts that invoke tar should use the bundled-
     argument format above, should limit themselves to the c, t, and x modes,
     and the b, f, m, v, and w options.

     Additional long options are provided to improve compatibility with other
     tar implementations.

SECURITY
     Certain security issues are common to many archiving programs, including
     tar.  In particular, carefully-crafted archives can request that tar
     extract files to locations outside of the target directory.  This can
     potentially be used to cause unwitting users to overwrite files they did
     not intend to overwrite.  If the archive is being extracted by the supe‐
     ruser, any file on the system can potentially be overwritten.  There are
     three ways this can happen.  Although tar has mechanisms to protect
     against each one, savvy users should be aware of the implications:

     ·	     Archive entries can have absolute pathnames.  By default, tar
	     removes the leading / character from filenames before restoring
	     them to guard against this problem.

     ·	     Archive entries can have pathnames that include .. components.
	     By default, tar will not extract files containing .. components
	     in their pathname.

     ·	     Archive entries can exploit symbolic links to restore files to
	     other directories.	 An archive can restore a symbolic link to
	     another directory, then use that link to restore a file into that
	     directory.	 To guard against this, tar checks each extracted path
	     for symlinks.  If the final path element is a symlink, it will be
	     removed and replaced with the archive entry.  If -U is specified,
	     any intermediate symlink will also be unconditionally removed.
	     If neither -U nor -P is specified, tar will refuse to extract the
	     entry.
     To protect yourself, you should be wary of any archives that come from
     untrusted sources.	 You should examine the contents of an archive with
	   tar -tf filename
     before extraction.	 You should use the -k option to ensure that tar will
     not overwrite any existing files or the -U option to remove any pre-
     existing files.  You should generally not extract archives while running
     with super-user privileges.  Note that the -P option to tar disables the
     security checks above and allows you to extract an archive while preserv‐
     ing any absolute pathnames, .. components, or symlinks to other directo‐
     ries.

SEE ALSO
     bzip2(1), compress(1), cpio(1), gzip(1), mt(1), pax(1), shar(1), xz(1),
     libarchive(3), libarchive-formats(5), tar(5)

STANDARDS
     There is no current POSIX standard for the tar command; it appeared in
     ISO/IEC 9945-1:1996 (“POSIX.1”) but was dropped from IEEE Std 1003.1-2001
     (“POSIX.1”).  The options supported by this implementation were developed
     by surveying a number of existing tar implementations as well as the old
     POSIX specification for tar and the current POSIX specification for pax.

     The ustar and pax interchange file formats are defined by IEEE Std
     1003.1-2001 (“POSIX.1”) for the pax command.

HISTORY
     A tar command appeared in Seventh Edition Unix, which was released in
     January, 1979.  There have been numerous other implementations, many of
     which extended the file format.  John Gilmore's pdtar public-domain
     implementation (circa November, 1987) was quite influential, and formed
     the basis of GNU tar.  GNU tar was included as the standard system tar in
     FreeBSD beginning with FreeBSD 1.0.

     This is a complete re-implementation based on the libarchive(3) library.
     It was first released with FreeBSD 5.4 in May, 2005.

BUGS
     This program follows ISO/IEC 9945-1:1996 (“POSIX.1”) for the definition
     of the -l option.	Note that GNU tar prior to version 1.15 treated -l as
     a synonym for the --one-file-system option.

     The -C dir option may differ from historic implementations.

     All archive output is written in correctly-sized blocks, even if the out‐
     put is being compressed.  Whether or not the last output block is padded
     to a full block size varies depending on the format and the output
     device.  For tar and cpio formats, the last block of output is padded to
     a full block size if the output is being written to standard output or to
     a character or block device such as a tape drive.	If the output is being
     written to a regular file, the last block will not be padded.  Many com‐
     pressors, including gzip(1) and bzip2(1), complain about the null padding
     when decompressing an archive created by tar, although they still extract
     it correctly.

     The compression and decompression is implemented internally, so there may
     be insignificant differences between the compressed output generated by
	   tar -czf - file
     and that generated by
	   tar -cf - file | gzip

     The default should be to read and write archives to the standard I/O
     paths, but tradition (and POSIX) dictates otherwise.

     The r and u modes require that the archive be uncompressed and located in
     a regular file on disk.  Other archives can be modified using c mode with
     the @archive-file extension.

     To archive a file called @foo or -foo you must specify it as ./@foo or
     ./-foo, respectively.

     In create mode, a leading ./ is always removed.  A leading / is stripped
     unless the -P option is specified.

     There needs to be better support for file selection on both create and
     extract.

     There is not yet any support for multi-volume archives or for archiving
     sparse files.

     Converting between dissimilar archive formats (such as tar and cpio)
     using the @- convention can cause hard link information to be lost.
     (This is a consequence of the incompatible ways that different archive
     formats store hardlink information.)

BSD			       November 1, 2012				   BSD
[top]

List of man pages available for Archlinux

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net