XArc man page on QNX

Man page or keyword search:  
man Server   4347 pages
apropos Keyword Search (all sections)
Output format
QNX logo
[printable version]

XDrawArc(3)			XLIB FUNCTIONS			   XDrawArc(3)

NAME
       XDrawArc, XDrawArcs, XArc - draw arcs and arc structure

SYNTAX
       int XDrawArc(Display *display, Drawable d, GC gc, int x, int y,
	      unsigned int width, unsigned int height, int angle1, int
	      angle2);

       int XDrawArcs(Display *display, Drawable d, GC gc, XArc *arcs, int
	      narcs);

ARGUMENTS
       angle1	 Specifies the start of the arc relative to the three-o'clock
		 position from the center, in units of degrees * 64.

       angle2	 Specifies the path and extent of the arc relative to the
		 start of the arc, in units of degrees * 64.

       arcs	 Specifies an array of arcs.

       d	 Specifies the drawable.

       display	 Specifies the connection to the X server.

       gc	 Specifies the GC.

       narcs	 Specifies the number of arcs in the array.

       width
       height	 Specify the width and height, which are the major and minor
		 axes of the arc.

       x
       y	 Specify the x and y coordinates, which are relative to the
		 origin of the drawable and specify the upper-left corner of
		 the bounding rectangle.

DESCRIPTION
       XDrawArc draws a single circular or elliptical arc, and XDrawArcs draws
       multiple circular or elliptical arcs.  Each arc is specified by a rec‐
       tangle and two angles.  The center of the circle or ellipse is the cen‐
       ter of the rectangle, and the major and minor axes are specified by the
       width and height.  Positive angles indicate counterclockwise motion,
       and negative angles indicate clockwise motion.  If the magnitude of
       angle2 is greater than 360 degrees, XDrawArc or XDrawArcs truncates it
       to 360 degrees.

       For an arc specified as [x,y,width,height,angle1,angle2], the origin of
       the major and minor axes is at [x+_____,y+______], and the infinitely
       thin path describing the entire circle or ellipse intersects the hori‐
       zontal axis at [x,y+______] and [x+width,y+______] and intersects the
       vertical axis at [x+_____,y] and [x+_____,y+height].  These coordinates
       can be fractional and so are not truncated to discrete coordinates.
       The path should be defined by the ideal mathematical path.  For a wide
       line with line-width lw, the bounding outlines for filling are given by
       the two infinitely thin paths consisting of all points whose perpendic‐
       ular distance from the path of the circle/ellipse is equal to lw/2
       (which may be a fractional value).  The cap-style and join-style are
       applied the same as for a line corresponding to the tangent of the cir‐
       cle/ellipse at the endpoint.

       For an arc specified as [x,y,width,height,angle1,angle2], the angles
       must be specified in the effectively skewed coordinate system of the
       ellipse (for a circle, the angles and coordinate systems are identi‐
       cal).  The relationship between these angles and angles expressed in
       the normal coordinate system of the screen (as measured with a protrac‐
       tor) is as follows:

       skewed-angle=atan⎝tan(normal-angle)*______⎠+adjust

       The skewed-angle and normal-angle are expressed in radians (rather than
       in degrees scaled by 64) in the range [0,2π] and where atan returns a
       value in the range [−_,_] and adjust is:

       l l.  0	  for normal-angle in the range [0,_] π	   for normal-angle in
       the range [_,__] 2π   for normal-angle in the range [__,2π]

       For any given arc, XDrawArc and XDrawArcs do not draw a pixel more than
       once.  If two arcs join correctly and if the line-width is greater than
       zero and the arcs intersect, XDrawArc and XDrawArcs do not draw a pixel
       more than once.	Otherwise, the intersecting pixels of intersecting
       arcs are drawn multiple times.  Specifying an arc with one endpoint and
       a clockwise extent draws the same pixels as specifying the other end‐
       point and an equivalent counterclockwise extent, except as it affects
       joins.

       If the last point in one arc coincides with the first point in the fol‐
       lowing arc, the two arcs will join correctly.  If the first point in
       the first arc coincides with the last point in the last arc, the two
       arcs will join correctly.  By specifying one axis to be zero, a hori‐
       zontal or vertical line can be drawn.  Angles are computed based solely
       on the coordinate system and ignore the aspect ratio.

       Both functions use these GC components: function, plane-mask, line-
       width, line-style, cap-style, join-style, fill-style, subwindow-mode,
       clip-x-origin, clip-y-origin, and clip-mask.  They also use these GC
       mode-dependent components: foreground, background, tile, stipple, tile-
       stipple-x-origin, tile-stipple-y-origin, dash-offset, and dash-list.

       XDrawArc and XDrawArcs can generate BadDrawable, BadGC, and BadMatch
       errors.

STRUCTURES
       The XArc structure contains:

       typedef struct {
	    short x, y;
	    unsigned short width, height;
	    short angle1, angle2;	      /* Degrees * 64 */
       } XArc;

       All x and y members are signed integers.	 The width and height members
       are 16-bit unsigned integers.  You should be careful not to generate
       coordinates and sizes out of the 16-bit ranges, because the protocol
       only has 16-bit fields for these values.

DIAGNOSTICS
       BadDrawable
		 A value for a Drawable argument does not name a defined Win‐
		 dow or Pixmap.

       BadGC	 A value for a GContext argument does not name a defined GCon‐
		 text.

       BadMatch	 An InputOnly window is used as a Drawable.

       BadMatch	 Some argument or pair of arguments has the correct type and
		 range but fails to match in some other way required by the
		 request.

SEE ALSO
       XDrawLine(3), XDrawPoint(3), XDrawRectangle(3)
       Xlib - C Language X Interface

X Version 11			 libX11 1.3.5			   XDrawArc(3)
[top]
                             _         _         _ 
                            | |       | |       | |     
                            | |       | |       | |     
                         __ | | __ __ | | __ __ | | __  
                         \ \| |/ / \ \| |/ / \ \| |/ /  
                          \ \ / /   \ \ / /   \ \ / /   
                           \   /     \   /     \   /    
                            \_/       \_/       \_/ 
More information is available in HTML format for server QNX

List of man pages available for QNX

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net