XFillPolygon man page on QNX

Printed from http://www.polarhome.com/service/man/?qf=XFillPolygon&af=0&tf=2&of=QNX

XFillRectangle(3)		XLIB FUNCTIONS		     XFillRectangle(3)

NAME
       XFillRectangle, XFillRectangles, XFillPolygon, XFillArc, XFillArcs -
       fill rectangles, polygons, or arcs

SYNTAX
       int XFillRectangle(Display *display, Drawable d, GC gc, int x, int y,
	      unsigned int width, unsigned int height);

       int XFillRectangles(Display *display, Drawable d, GC gc, XRectangle
	      *rectangles, int nrectangles);

       int XFillPolygon(Display *display, Drawable d, GC gc, XPoint *points,
	      int npoints, int shape, int mode);

       int XFillArc(Display *display, Drawable d, GC gc, int x, int y,
	      unsigned int width, unsigned int height, int angle1, int
	      angle2);

       int XFillArcs(Display *display, Drawable d, GC gc, XArc *arcs, int
	      narcs);

ARGUMENTS
       angle1	 Specifies the start of the arc relative to the three-o'clock
		 position from the center, in units of degrees * 64.

       angle2	 Specifies the path and extent of the arc relative to the
		 start of the arc, in units of degrees * 64.

       arcs	 Specifies an array of arcs.

       d	 Specifies the drawable.

       display	 Specifies the connection to the X server.

       gc	 Specifies the GC.

       mode	 Specifies the coordinate mode.	 You can pass CoordModeOrigin
		 or CoordModePrevious.

       narcs	 Specifies the number of arcs in the array.

       npoints	 Specifies the number of points in the array.

       nrectangles
		 Specifies the number of rectangles in the array.

       points	 Specifies an array of points.

       rectangles
		 Specifies an array of rectangles.

       shape	 Specifies a shape that helps the server to improve perfor‐
		 mance.	 You can pass Complex, Convex, or Nonconvex.

       width
       height	 Specify the width and height, which are the dimensions of the
		 rectangle to be filled or the major and minor axes of the
		 arc.

       x
       y	 Specify the x and y coordinates, which are relative to the
		 origin of the drawable and specify the upper-left corner of
		 the rectangle.

DESCRIPTION
       The XFillRectangle and XFillRectangles functions fill the specified
       rectangle or rectangles as if a four-point FillPolygon protocol request
       were specified for each rectangle:

       [x,y] [x+width,y] [x+width,y+height] [x,y+height]

       Each function uses the x and y coordinates, width and height dimen‐
       sions, and GC you specify.

       XFillRectangles fills the rectangles in the order listed in the array.
       For any given rectangle, XFillRectangle and XFillRectangles do not draw
       a pixel more than once.	If rectangles intersect, the intersecting pix‐
       els are drawn multiple times.

       Both functions use these GC components: function, plane-mask, fill-
       style, subwindow-mode, clip-x-origin, clip-y-origin, and clip-mask.
       They also use these GC mode-dependent components: foreground, back‐
       ground, tile, stipple, tile-stipple-x-origin, and tile-stipple-y-ori‐
       gin.

       XFillRectangle and XFillRectangles can generate BadDrawable, BadGC, and
       BadMatch errors.

       XFillPolygon fills the region closed by the specified path.  The path
       is closed automatically if the last point in the list does not coincide
       with the first point.  XFillPolygon does not draw a pixel of the region
       more than once.	CoordModeOrigin treats all coordinates as relative to
       the origin, and CoordModePrevious treats all coordinates after the
       first as relative to the previous point.

       Depending on the specified shape, the following occurs:

       ·    If shape is Complex, the path may self-intersect.  Note that con‐
	    tiguous coincident points in the path are not treated as self-
	    intersection.

       ·    If shape is Convex, for every pair of points inside the polygon,
	    the line segment connecting them does not intersect the path.  If
	    known by the client, specifying Convex can improve performance.
	    If you specify Convex for a path that is not convex, the graphics
	    results are undefined.

       ·    If shape is Nonconvex, the path does not self-intersect, but the
	    shape is not wholly convex.	 If known by the client, specifying
	    Nonconvex instead of Complex may improve performance.  If you
	    specify Nonconvex for a self-intersecting path, the graphics
	    results are undefined.

       The fill-rule of the GC controls the filling behavior of self-inter‐
       secting polygons.

       This function uses these GC components: function, plane-mask, fill-
       style, fill-rule, subwindow-mode, clip-x-origin, clip-y-origin, and
       clip-mask.  It also uses these GC mode-dependent components: fore‐
       ground, background, tile, stipple, tile-stipple-x-origin, and tile-
       stipple-y-origin.

       XFillPolygon can generate BadDrawable, BadGC, BadMatch, and BadValue
       errors.

       For each arc, XFillArc or XFillArcs fills the region closed by the in‐
       finitely thin path described by the specified arc and, depending on the
       arc-mode specified in the GC, one or two line segments.	For ArcChord,
       the single line segment joining the endpoints of the arc is used.  For
       ArcPieSlice, the two line segments joining the endpoints of the arc
       with the center point are used.	XFillArcs fills the arcs in the order
       listed in the array.  For any given arc, XFillArc and XFillArcs do not
       draw a pixel more than once.  If regions intersect, the intersecting
       pixels are drawn multiple times.

       Both functions use these GC components: function, plane-mask, fill-
       style, arc-mode, subwindow-mode, clip-x-origin, clip-y-origin, and
       clip-mask.  They also use these GC mode-dependent components: fore‐
       ground, background, tile, stipple, tile-stipple-x-origin, and tile-
       stipple-y-origin.

       XFillArc and XFillArcs can generate BadDrawable, BadGC, and BadMatch
       errors.

DIAGNOSTICS
       BadDrawable
		 A value for a Drawable argument does not name a defined Win‐
		 dow or Pixmap.

       BadGC	 A value for a GContext argument does not name a defined GCon‐
		 text.

       BadMatch	 An InputOnly window is used as a Drawable.

       BadMatch	 Some argument or pair of arguments has the correct type and
		 range but fails to match in some other way required by the
		 request.

       BadValue	 Some numeric value falls outside the range of values accepted
		 by the request.  Unless a specific range is specified for an
		 argument, the full range defined by the argument's type is
		 accepted.  Any argument defined as a set of alternatives can
		 generate this error.

SEE ALSO
       XDrawArc(3), XDrawPoint(3), XDrawRectangle(3)
       Xlib - C Language X Interface

X Version 11			 libX11 1.3.5		     XFillRectangle(3)
[top]
                             _         _         _ 
                            | |       | |       | |     
                            | |       | |       | |     
                         __ | | __ __ | | __ __ | | __  
                         \ \| |/ / \ \| |/ / \ \| |/ /  
                          \ \ / /   \ \ / /   \ \ / /   
                           \   /     \   /     \   /    
                            \_/       \_/       \_/ 
More information is available in HTML format for server QNX

List of man pages available for QNX

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net