ADDZONE(1M) K-Talk by Xinet (10/14/99 10.1) ADDZONE(1M)
NAME
/usr/etc/appletalk/addzone - add a zone to a specific
interface
SYNOPSIS
addzone interface zone [ zone ] [ zone ] [...]
DESCRIPTION
Addzone uses the AppleTalk Zone Information Protocol to add
a zone to the network attached to a specific interface. If
the zone never appears, it is a sign that the nbpd(1m)
daemon is malfunctioning. Adding a zone to the loopback
(lo0) adds it to the local pseudo-net. If other routers are
present on the same network, it is important that each have
the same list of zones. This is most easily accomplished by
designating a ``seed'' router and allowing the other routers
to obtain their zone lists from it. K-Talk will attempt to
obtain a zone list from other routers on the net as well as
adding those provided through addzone.
DIAGNOSTICS
Can't add zones to a Phase 1 network Phase 1 networks have
only one zone, so
additional zones can
not be specified.
SEE ALSO
nbpd(1m), myzone(1), getzones(1)
Page 1 (printed 5/15/100)
