ALE(4)			  OpenBSD Programmer's Manual			ALE(4)

NAME
     ale - Atheros AR8121/AR8113/AR8114 10/100/Gigabit Ethernet device

SYNOPSIS
     ale* at pci?
     atphy* at mii?

DESCRIPTION
     The ale driver provides support for Ethernet interfaces based on the
     Atheros AR8121 Gigabit Ethernet chipset and the AR8113/AR8114 Fast
     Ethernet chipsets, also known as the Attansic L1E.

     The ale driver supports IPv4 receive IP/TCP/UDP checksum offload and VLAN
     tag insertion and stripping.

     The following media types are supported:

     autoselect	 Enable autoselection of the media type and options.
     10baseT	 Set 10Mbps operation.
     100baseTX	 Set 100Mbps (Fast Ethernet) operation.
     1000baseT	 Set 1000Mbps (Gigabit Ethernet) operation.

     For more information on configuring this device, see ifconfig(8).	To
     view a list of media types and options supported by the card, try
     ifconfig <device> media.  For example, ifconfig ale0 media.

SEE ALSO
     arp(4), atphy(4), ifmedia(4), intro(4), netintro(4), pci(4),
     hostname.if(5), ifconfig(8)

HISTORY
     The ale device driver first appeared in OpenBSD 4.5.

AUTHORS
     The ale driver was written by Pyun YongHyeon for FreeBSD and ported to
     OpenBSD by Kevin Lo <kevlo@openbsd.org>.

OpenBSD 4.9			August 7, 2009			   OpenBSD 4.9

Vote for polarhome