AMRECOVER(8)AMRECOVER(8)NAMEamrecover - Amanda index database browser
SYNOPSISamrecover [[-C�]�config] [-s�index-server] [-t�tape-server] [-d�tape-
device]
DESCRIPTION
Amrecover browses the database of Amanda index files to determine which
tapes contain files to recover. Furthermore, it is able to recover
files.
In order to restore files in place, you must invoke amrecover from the
root of the backed up filesystem, or use lcd to move into that direc‐
tory, otherwise a directory tree that resembles the backed up filesys‐
tem will be created in the current directory. See the examples below
for details.
See the amanda(8) man page for more details about Amanda.
OPTIONS
Note
The Default values are those set at compile-time. Use amrestore to
recover client-encrypted or client-custom-compressed tapes..TP [ -C ]
config Amanda configuration.
-s index-server
Host that runs the index daemon.
-t tape-server
Host that runs the tape server daemon.
-d tape-device
Tape device to use on the tape server host.
COMMANDS
Amrecover connects to the index server and then presents a command line
prompt. Usage is similar to an ftp client. The GNU readline library is
used to provide command line history and editing if it was built in to
amrecover.
The purpose of browsing the database is to build up a restore list of
files to be extracted from the backup system. The following commands
are available:
sethost hostname
Specifies which host to look at backup files for (default: the
local host).
setdate YYYY-MM-DD
Set the date (default: today). File listing commands only return
information on backup images for this day, for the day before
with the next lower dump level, and so on, until the most recent
level 0 backup on or before the specified date is encountered.
For example, if:
1996-07-01 was a level 0 backup
1996-07-02 through 1996-07-05 were level 1 backups
1996-07-06 through 1997-07-08 were level 2 backups
then if 1997-07-08 is the requested date, files from the follow‐
ing days would be used:
1997-07-08 (the latest level 2 backup)
1997-07-05 (the latest level 1 backup)
1997-07-01 (the latest level 0 backup)
Only the most recent version of a file will be presented.
The following abbreviated date specifications are accepted:
--MM-DD
dates in the current year
---DD dates in the current month of the current year
setdisk diskname [mountpoint]
Specifies which disk to consider (default: the disk holding the
working directory where amrecover is started). It can only be
set after the host is set with sethost. Diskname is the device
name specified in the amanda.conf or disklist configuration
file. The disk must be local to the host. If mountpoint is not
specified, all pathnames will be relative to the (unknown) mount
point instead of full pathnames.
listdisk [diskdevice]
List all diskname
settape [[server]:][tapedev|default]
Specifies the host to use as the tape server, and which of its
tape devices to use. If the server is omitted, but the colon is
not, the server name reverts to the configure-time default. If
the tape device is omitted, it remains unchanged. To use the
default tape device selected by the tape server, the word
default must be specified. If no argument is specified, or the
argument is an empty string, no changes occur, and the current
settings are displayed.
If you want amrecover to use your changer, the tapedev must be
equal to the amrecover_changer setting on the server.
If you need to change the protocol (tape:, rait:, file:, null:)
then you must specify the hostname.
settape 192.168.0.10:file:/file1
You can change the tape device when amrecover ask you to load
the tape:
Load tape DMP014 now
Continue? [Y/n/t]: t
Tape device: server2:/dev/nst2
Continue? [Y/n/t]: Y
Using tape /dev/nst2 from server server2.
setmode mode
Set the extraction mode for Samba shares. If mode is smb, shares
are sent to the Samba server to be restored back onto the PC. If
mode is tar, they are extracted on the local machine the same
way tar volumes are extracted.
mode Displays the extracting mode for Samba shares.
history
Show the backup history of the current host and disk. Dates,
levels, tapes and file position on tape of each backup are dis‐
played.
pwd Display the name of the current backup working directory.
cd dir Change the backup working directory to dir. If the mount point
was specified with setdisk, this can be a full pathname or it
can be relative to the current backup working directory. If the
mount point was not specified, paths are relative to the mount
point if they start with "/", otherwise they are relative to the
current backup working directory. The dir can be a shell style
wildcards.
cdx dir
Like the cd command but allow regular expression.
lpwd Display the amrecover working directory. Files will be restored
under this directory, relative to the backed up filesystem.
lcd path
Change the amrecover working directory to path.
ls List the contents of the current backup working directory. See
the description of the setdate command for how the view of the
directory is built up. The backup date is shown for each file.
add item1 item2 ...
Add the specified files or directories to the restore list. Each
item may have shell style wildcards.
addx item1 item2 ...
Add the specified files or directories to the restore list. Each
item may be a regular expression.
delete item1 item2 ...
Delete the specified files or directories from the restore list.
Each item may have shell style wildcards.
deletex item1 item2 ...
Delete the specified files or directories from the restore list.
Each item may be a regular expression.
list file
Display the contents of the restore list. If a file name is
specified, the restore list is written to that file. This can be
used to manually extract the files from the Amanda tapes with
amrestore.
clear Clear the restore list.
quit Close the connection to the index server and exit.
exit Close the connection to the index server and exit.
extract
Start the extract sequence (see the examples below). Make sure
the local working directory is the root of the backed up
filesystem, or another directory that will behave like that. Use
lpwd to display the local working directory, and lcd to change
it.
help Display a brief list of these commands.
EXAMPLES
The following shows the recovery of an old syslog file.
# cd /var/log
# ls -l syslog.7
syslog.7: No such file or directory
# amrecover
AMRECOVER Version 2.4.2. Contacting server on oops ...
220 oops Amanda index server (2.4.2) ready.
Setting restore date to today (1997-12-09)
200 Working date set to 1997-12-09.
200 Config set to daily.
200 Dump host set to this-host.some.org.
$CWD '/var/log' is on disk '/var' mounted at '/var'.
200 Disk set to /var.
/var/log
WARNING: not on root of selected filesystem, check man-page!
amrecover> ls
1997-12-09 daemon.log
1997-12-09 syslog
1997-12-08 authlog
1997-12-08 sysidconfig.log
1997-12-08 syslog.0
1997-12-08 syslog.1
1997-12-08 syslog.2
1997-12-08 syslog.3
1997-12-08 syslog.4
1997-12-08 syslog.5
1997-12-08 syslog.6
1997-12-08 syslog.7
amrecover> add syslog.7
Added /log/syslog.7
amrecover> lpwd
/var/log
amrecover> lcd ..
/var
amrecover> extract
Extracting files using tape drive /dev/nst0 on host 192.168.0.10
The following tapes are needed: DMP014
Restoring files into directory /var
Continue? [Y/n]: y
Load tape DMP014 now
Continue? [Y/n/t]: y
set owner/mode for '.'? [yn] n
amrecover> quit
200 Good bye.
# ls -l syslog.7
total 26
-rw-r--r-- 1 root other 12678 Oct 14 16:36 syslog.7
If you do not want to overwrite existing files, create a subdirectory
to run amrecover from and then move the restored files afterward.
# cd /var
# (umask 077 ; mkdir .restore)
# cd .restore
# amrecover
AMRECOVER Version 2.4.2. Contacting server on oops ...
amrecover> cd log
/var/log
amrecover> ls
amrecover> add syslog.7
Added /log/syslog.7
amrecover> lpwd
/var/.restore
amrecover> extract
Extracting files using tape drive /dev/nst0 on host 192.168.0.10
amrecover> quit
200 Good bye.
# mv -i log/syslog.7 ../log/syslog.7-restored
# cd ..
# rm -fr .restore
If you need to run amrestore by hand instead of letting amrecover con‐
trol it, use the list command after browsing to display the needed
tapes.
# cd /var/log
# amrecover
AMRECOVER Version 2.4.2. Contacting server on oops ...
amrecover> ls
amrecover> add syslog syslog.6 syslog.7
Added /log/syslog
Added /log/syslog.6
Added /log/syslog.7
amrecover> list
TAPE DMP014 LEVEL 0 DATE 1997-12-08
/log/syslog.7
/log/syslog.6
TAPE DMP015 LEVEL 1 DATE 1997-12-09
/log/syslog
amrecover> quit
The history command shows each tape that has a backup of the current
disk along with the date of the backup, the level, the tape label and
the file position on the tape. All active tapes are listed, not just
back to the most recent full dump.
Tape file position zero is a label. The first backup image is in file
position one.
# cd /var/log
# amrecover
AMRECOVER Version 2.4.2. Contacting server on oops ...
amrecover> history
200- Dump history for config "daily" host "this-host.some.org" disk "/var"
201- 1997-12-09 1 DMP015 9
201- 1997-12-08 1 DMP014 11
201- 1997-12-07 0 DMP013 22
201- 1997-12-06 1 DMP012 16
201- 1997-12-05 1 DMP011 9
201- 1997-12-04 0 DMP010 11
201- 1997-12-03 1 DMP009 7
201- 1997-12-02 1 DMP008 7
201- 1997-12-01 1 DMP007 9
201- 1997-11-30 1 DMP006 6
amrecover> quit
ENVIRONMENT
PAGERThe ls and list commands will use $PAGER to display the file
lists. Defaults to more if PAGER is not set.
AUTHOR
Alan M. McIvor <alan@kauri.auck.irl.cri.nz> : Original text
Stefan G. Weichinger, <sgw@amanda.org>, maintainer of the Amanda-docu‐
mentation: XML-conversion
SEE ALSOamanda(8), amrestore(8), amfetchdump(8), readline(3)AMRECOVER(8)
