asn1parse man page on Alpinelinux

Man page or keyword search:  
man Server   18016 pages
apropos Keyword Search (all sections)
Output format
Alpinelinux logo
[printable version]

ASN1PARSE(1)			    OpenSSL			  ASN1PARSE(1)

NAME
       asn1parse - ASN.1 parsing tool

SYNOPSIS
       openssl asn1parse [-inform PEM|DER] [-in filename] [-out filename]
       [-noout] [-offset number] [-length number] [-i] [-oid filename]
       [-strparse offset] [-genstr string] [-genconf file]

DESCRIPTION
       The asn1parse command is a diagnostic utility that can parse ASN.1
       structures. It can also be used to extract data from ASN.1 formatted
       data.

OPTIONS
       -inform DER|PEM
	   the input format. DER is binary format and PEM (the default) is
	   base64 encoded.

       -in filename
	   the input file, default is standard input

       -out filename
	   output file to place the DER encoded data into. If this option is
	   not present then no data will be output. This is most useful when
	   combined with the -strparse option.

       -noout
	   don't output the parsed version of the input file.

       -offset number
	   starting offset to begin parsing, default is start of file.

       -length number
	   number of bytes to parse, default is until end of file.

       -i  indents the output according to the "depth" of the structures.

       -oid filename
	   a file containing additional OBJECT IDENTIFIERs (OIDs). The format
	   of this file is described in the NOTES section below.

       -strparse offset
	   parse the contents octets of the ASN.1 object starting at offset.
	   This option can be used multiple times to "drill down" into a
	   nested structure.

       -genstr string, -genconf file
	   generate encoded data based on string, file or both using
	   ASN1_generate_nconf(3) format. If file only is present then the
	   string is obtained from the default section using the name asn1.
	   The encoded data is passed through the ASN1 parser and printed out
	   as though it came from a file, the contents can thus be examined
	   and written to a file using the out option.

   OUTPUT
       The output will typically contain lines like this:

	 0:d=0	hl=4 l= 681 cons: SEQUENCE

       .....

	 229:d=3  hl=3 l= 141 prim: BIT STRING
	 373:d=2  hl=3 l= 162 cons: cont [ 3 ]
	 376:d=3  hl=3 l= 159 cons: SEQUENCE
	 379:d=4  hl=2 l=  29 cons: SEQUENCE
	 381:d=5  hl=2 l=   3 prim: OBJECT	      :X509v3 Subject Key Identifier
	 386:d=5  hl=2 l=  22 prim: OCTET STRING
	 410:d=4  hl=2 l= 112 cons: SEQUENCE
	 412:d=5  hl=2 l=   3 prim: OBJECT	      :X509v3 Authority Key Identifier
	 417:d=5  hl=2 l= 105 prim: OCTET STRING
	 524:d=4  hl=2 l=  12 cons: SEQUENCE

       .....

       This example is part of a self signed certificate. Each line starts
       with the offset in decimal. d=XX specifies the current depth. The depth
       is increased within the scope of any SET or SEQUENCE. hl=XX gives the
       header length (tag and length octets) of the current type. l=XX gives
       the length of the contents octets.

       The -i option can be used to make the output more readable.

       Some knowledge of the ASN.1 structure is needed to interpret the
       output.

       In this example the BIT STRING at offset 229 is the certificate public
       key.  The contents octets of this will contain the public key
       information. This can be examined using the option -strparse 229 to
       yield:

	   0:d=0  hl=3 l= 137 cons: SEQUENCE
	   3:d=1  hl=3 l= 129 prim: INTEGER	      :E5D21E1F5C8D208EA7A2166C7FAF9F6BDF2059669C60876DDB70840F1A5AAFA59699FE471F379F1DD6A487E7D5409AB6A88D4A9746E24B91D8CF55DB3521015460C8EDE44EE8A4189F7A7BE77D6CD3A9AF2696F486855CF58BF0EDF2B4068058C7A947F52548DDF7E15E96B385F86422BEA9064A3EE9E1158A56E4A6F47E5897
	 135:d=1  hl=2 l=   3 prim: INTEGER	      :010001

NOTES
       If an OID is not part of OpenSSL's internal table it will be
       represented in numerical form (for example 1.2.3.4). The file passed to
       the -oid option allows additional OIDs to be included. Each line
       consists of three columns, the first column is the OID in numerical
       format and should be followed by white space. The second column is the
       "short name" which is a single word followed by white space. The final
       column is the rest of the line and is the "long name". asn1parse
       displays the long name. Example:

       "1.2.3.4	 shortName A long name"

EXAMPLES
       Parse a file:

	openssl asn1parse -in file.pem

       Parse a DER file:

	openssl asn1parse -inform DER -in file.der

       Generate a simple UTF8String:

	openssl asn1parse -genstr 'UTF8:Hello World'

       Generate and write out a UTF8String, don't print parsed output:

	openssl asn1parse -genstr 'UTF8:Hello World' -noout -out utf8.der

       Generate using a config file:

	openssl asn1parse -genconf asn1.cnf -noout -out asn1.der

       Example config file:

	asn1=SEQUENCE:seq_sect

	[seq_sect]

	field1=BOOL:TRUE
	field2=EXP:0, UTF8:some random string

BUGS
       There should be options to change the format of output lines. The
       output of some ASN.1 types is not well handled (if at all).

SEE ALSO
       ASN1_generate_nconf(3)

1.0.1h				  2014-06-05			  ASN1PARSE(1)
[top]

List of man pages available for Alpinelinux

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net