BOND2TEAM(1) Bonding to Team conversion tool BOND2TEAM(1)NAMEbond2team — Converts bonding configuration to team
SYNOPSISbond2team [options]
DESCRIPTIONbond2team is a tool to convert bonding options to team trying as much
as possible to keep the original functionality.
The resulted files are saved in a temporary directory using ifcfg style
by default. In the case of converting a ifcfg file, it translates the
bonding options to team preserving all other options. In that case, it
converts the respective slave ifcfg files to team port preserving all
their other options too. In case of converting from given bonding
options in the command line, the tool can use the specified ports as
team ports.
OPTIONS--master <interface>
Specify the interface name or ifcfg file to convert. If the
interface name is specified, the tool will look at
/etc/sysconfig/network-scripts/ for the respective ifcfg file.
--rename <interface>
This is a convenient option to replace the original interface
name by the specified name. For instance, if --master specifies
bond0, it is possible to use --rename team0 to change the final
interface name to team0.
--ifcfg
Set the output format to ifcfg config style. [default]
--json Set the output format to JSON style. See teamd.conf(5) for fur‐
ther details.
--bonding_opts '<bonding options>'
Specify the bonding options to be converted instead of reading
them from the ifcfg file.
--port <interface>
Set the specified interface as a team port.
--configdir <directory>
Change the ifcfg configuration path from
/etc/sysconfig/network-scripts to the specified <directory>.
--outputdir <directory>
Set the output directory to <directory>.
--stdout
Print the result to the screen instead of writing to files.
--debug
Increase the debugging level.
--quiet
Disallow any messages to be printed to console.
--version
Print tool version to console and exit.
--help Print help text to console and exit.
--examples
Print common usage examples to console and exit.
EXAMPLES
To convert the current 'bond0' ifcfg configuration to team ifcfg:
# bond2team--master bond0
To convert the current 'bond0' ifcfg configuration to team ifcfg renam‐
ing the interface name to 'team0'. Caution : firewall rules, aliases
interfaces, etc., that might be tied to the original interface name can
break after the renaming because the tool will only change the ifcfg
file, nothing else.
# bond2team--master bond0 --rename team0
To convert given bonding parameters with ports without any ifcfg:
# bond2team--bonding_opts 'mode=1 miimon=500 primary=eth1
primary_reselect=0' --port eth1 --port eth2 --port eth3 --port eth4
For more examples, see the option --examples.
CAVEATS
The tool will not convert any other configuration which might be tied
to the current setup. For instance, firewall rules, aliases interfaces,
bridges, and etc.
AUTHOR
Flavio Leitner is the original author of the tool. Jiri Pirko is the
original author and current maintainer of libteam.
SEE ALSOteamd(8), teamdctl(8), teamd.conf(5), teamnl(8)libteam 2013-07-18 BOND2TEAM(1)
