CGEGS(l) ) CGEGS(l)NAME
CGEGS - routine is deprecated and has been replaced by routine CGGES
SYNOPSIS
SUBROUTINE CGEGS( JOBVSL, JOBVSR, N, A, LDA, B, LDB, ALPHA, BETA, VSL,
LDVSL, VSR, LDVSR, WORK, LWORK, RWORK, INFO )
CHARACTER JOBVSL, JOBVSR
INTEGER INFO, LDA, LDB, LDVSL, LDVSR, LWORK, N
REAL RWORK( * )
COMPLEX A( LDA, * ), ALPHA( * ), B( LDB, * ), BETA( * ), VSL(
LDVSL, * ), VSR( LDVSR, * ), WORK( * )
PURPOSE
This routine is deprecated and has been replaced by routine CGGES.
CGEGS computes for a pair of N-by-N complex nonsymmetric matrices A, B:
the generalized eigenvalues (alpha, beta), the complex Schur form (A,
B), and optionally left and/or right Schur vectors (VSL and VSR).
(If only the generalized eigenvalues are needed, use the driver CGEGV
instead.)
A generalized eigenvalue for a pair of matrices (A,B) is, roughly
speaking, a scalar w or a ratio alpha/beta = w, such that A - w*B is
singular. It is usually represented as the pair (alpha,beta), as there
is a reasonable interpretation for beta=0, and even for both being
zero. A good beginning reference is the book, "Matrix Computations",
by G. Golub & C. van Loan (Johns Hopkins U. Press)
The (generalized) Schur form of a pair of matrices is the result of
multiplying both matrices on the left by one unitary matrix and both on
the right by another unitary matrix, these two unitary matrices being
chosen so as to bring the pair of matrices into upper triangular form
with the diagonal elements of B being non-negative real numbers (this
is also called complex Schur form.)
The left and right Schur vectors are the columns of VSL and VSR,
respectively, where VSL and VSR are the unitary matrices
which reduce A and B to Schur form:
Schur form of (A,B) = ( (VSL)**H A (VSR), (VSL)**H B (VSR) )
ARGUMENTS
JOBVSL (input) CHARACTER*1
= 'N': do not compute the left Schur vectors;
= 'V': compute the left Schur vectors.
JOBVSR (input) CHARACTER*1
= 'N': do not compute the right Schur vectors;
= 'V': compute the right Schur vectors.
N (input) INTEGER
The order of the matrices A, B, VSL, and VSR. N >= 0.
A (input/output) COMPLEX array, dimension (LDA, N)
On entry, the first of the pair of matrices whose generalized
eigenvalues and (optionally) Schur vectors are to be computed.
On exit, the generalized Schur form of A.
LDA (input) INTEGER
The leading dimension of A. LDA >= max(1,N).
B (input/output) COMPLEX array, dimension (LDB, N)
On entry, the second of the pair of matrices whose generalized
eigenvalues and (optionally) Schur vectors are to be computed.
On exit, the generalized Schur form of B.
LDB (input) INTEGER
The leading dimension of B. LDB >= max(1,N).
ALPHA (output) COMPLEX array, dimension (N)
BETA (output) COMPLEX array, dimension (N) On exit,
ALPHA(j)/BETA(j), j=1,...,N, will be the generalized eigenval‐
ues. ALPHA(j), j=1,...,N and BETA(j), j=1,...,N are the
diagonals of the complex Schur form (A,B) output by CGEGS. The
BETA(j) will be non-negative real.
Note: the quotients ALPHA(j)/BETA(j) may easily over- or under‐
flow, and BETA(j) may even be zero. Thus, the user should
avoid naively computing the ratio alpha/beta. However, ALPHA
will be always less than and usually comparable with norm(A) in
magnitude, and BETA always less than and usually comparable
with norm(B).
VSL (output) COMPLEX array, dimension (LDVSL,N)
If JOBVSL = 'V', VSL will contain the left Schur vectors. (See
"Purpose", above.) Not referenced if JOBVSL = 'N'.
LDVSL (input) INTEGER
The leading dimension of the matrix VSL. LDVSL >= 1, and if
JOBVSL = 'V', LDVSL >= N.
VSR (output) COMPLEX array, dimension (LDVSR,N)
If JOBVSR = 'V', VSR will contain the right Schur vectors.
(See "Purpose", above.) Not referenced if JOBVSR = 'N'.
LDVSR (input) INTEGER
The leading dimension of the matrix VSR. LDVSR >= 1, and if
JOBVSR = 'V', LDVSR >= N.
WORK (workspace/output) COMPLEX array, dimension (LWORK)
On exit, if INFO = 0, WORK(1) returns the optimal LWORK.
LWORK (input) INTEGER
The dimension of the array WORK. LWORK >= max(1,2*N). For
good performance, LWORK must generally be larger. To compute
the optimal value of LWORK, call ILAENV to get blocksizes (for
CGEQRF, CUNMQR, and CUNGQR.) Then compute: NB -- MAX of the
blocksizes for CGEQRF, CUNMQR, and CUNGQR; the optimal LWORK is
N*(NB+1).
If LWORK = -1, then a workspace query is assumed; the routine
only calculates the optimal size of the WORK array, returns
this value as the first entry of the WORK array, and no error
message related to LWORK is issued by XERBLA.
RWORK (workspace) REAL array, dimension (3*N)
INFO (output) INTEGER
= 0: successful exit
< 0: if INFO = -i, the i-th argument had an illegal value.
=1,...,N: The QZ iteration failed. (A,B) are not in Schur
form, but ALPHA(j) and BETA(j) should be correct for
j=INFO+1,...,N. > N: errors that usually indicate LAPACK
problems:
=N+1: error return from CGGBAL
=N+2: error return from CGEQRF
=N+3: error return from CUNMQR
=N+4: error return from CUNGQR
=N+5: error return from CGGHRD
=N+6: error return from CHGEQZ (other than failed iteration)
=N+7: error return from CGGBAK (computing VSL)
=N+8: error return from CGGBAK (computing VSR)
=N+9: error return from CLASCL (various places)
LAPACK version 3.0 15 June 2000 CGEGS(l)
