CHIPS(4)CHIPS(4)NAMEchips - Chips and Technologies video driver
SYNOPSIS
Section "Device"
Identifier "devname"
Driver "chips"
...
EndSection
DESCRIPTIONchips is an Xorg driver for Chips and Technologies video processors.
The majority of the Chips and Technologies chipsets are supported by
this driver. In general the limitation on the capabilities of this
driver are determined by the chipset on which it is run. Where possi‐
ble, this driver provides full acceleration and supports the following
depths: 1, 4, 8, 15, 16, 24 and on the latest chipsets an 8+16 overlay
mode. All visual types are supported for depth 1, 4 and 8 and both
TrueColor and DirectColor visuals are supported where possible. Multi-
head configurations are supported on PCI or AGP buses.
SUPPORTED HARDWARE
The chips driver supports video processors on most of the bus types
currently available. The chipsets supported fall into one of three
architectural classes. A basic architecture, the WinGine architecture
and the newer HiQV architecture.
Basic Architecture
The supported chipsets are ct65520, ct65525, ct65530, ct65535, ct65540,
ct65545, ct65546 and ct65548
Color depths 1, 4 and 8 are supported on all chipsets, while depths 15,
16 and 24 are supported only on the 65540, 65545, 65546 and 65548
chipsets. The driver is accelerated when used with the 65545, 65546 or
65548 chipsets, however the DirectColor visual is not available.
Wingine Architecture
The supported chipsets are ct64200 and ct64300
Color depths 1, 4 and 8 are supported on both chipsets, while depths
15, 16 and 24 are supported only on the 64300 chipsets. The driver is
accelerated when used with the 64300 chipsets, however the DirectColor
visual is not available.
HiQV Architecture
The supported chipsets are ct65550, ct65554, ct65555, ct68554, ct69000
and ct69030
Color depths 1, 4, 8, 15, 16, 24 and 8+16 are supported on all
chipsets. The DirectColor visual is supported on all color depths
except the 8+16 overlay mode. Full acceleration is supplied for all
chipsets.
CONFIGURATION DETAILS
Please refer to xorg.conf(5) for general configuration details. This
section only covers configuration details specific to this driver.
The driver auto-detects the chipset type, but the following ChipSet
names may optionally be specified in the config file "Device" section,
and will override the auto-detection:
"ct65520", "ct65525", "ct65530", "ct65535", "ct65540", "ct65545",
"ct65546", "ct65548", "ct65550", "ct65554", "ct65555", "ct68554",
"ct69000", "ct69030", "ct64200", "ct64300".
The driver will auto-detect the amount of video memory present for all
chipsets. But maybe overridden with the VideoRam entry in the config
file "Device" section.
The following driver Options are supported, on one or more of the sup‐
ported chipsets:
Option "NoAccel" "boolean"
Disable or enable acceleration. Default: acceleration is
enabled.
Option "NoLinear" "boolean"
Disables linear addressing in cases where it is enabled by
default. Default: off
Option "Linear" "boolean"
Enables linear addressing in cases where it is disabled by
default. Default: off
Option "HWCursor" "boolean"
Enable or disable the HW cursor. Default: on.
Option "SWCursor" "boolean"
Enable or disable the SW cursor. Default: off.
Option "STN" "boolean"
Force detection of STN screen type. Default: off.
Option "UseModeline" "boolean"
Reprogram flat panel timings with values from the modeline.
Default: off
Option "FixPanelSize" "boolean"
Reprogram flat panel size with values from the modeline.
Default: off
Option "NoStretch" "boolean"
This option disables the stretching on a mode on a flat panel to
fill the screen. Default: off
Option "LcdCenter" "boolean"
Center the mode displayed on the flat panel on the screen.
Default: off
Option "HWclocks" "boolean"
Force the use of fixed hardware clocks on chips that support
both fixed and programmable clocks. Default: off
Option "UseVclk1" "boolean"
Use the Vclk1 programmable clock on HiQV chipsets instead of
Vclk2. Default: off
Option "FPClock8" "float"
Option "FPClock16" "float"
Option "FPClock24" "float"
Option "FPClock32" "float"
Force the use of a particular video clock speed for use with the
flat panel at a specified depth
Option "MMIO" "boolean"
Force the use of memory mapped IO for acceleration registers.
Default: off
Option "FullMMIO" "boolean"
Force the use of memory mapped IO where it can be used. Default:
off
Option "SuspendHack" "boolean"
Force driver to leave centering and stretching registers alone.
This can fix some laptop suspend/resume problems. Default: off
Option "ColorKey" "integer"
Set the colormap index used for the transparency key for the
depth 8 plane when operating in 8+16 overlay mode. The value
must be in the range 2-255. Default: 255.
Option "VideoKey" "integer"
This sets the default pixel value for the YUV video overlay key.
Default: undefined.
Option "ShadowFB" "boolean"
Enable or disable use of the shadow framebuffer layer. Default:
off.
Option "SyncOnGreen" "boolean"
Enable or disable combining the sync signals with the green sig‐
nal. Default: off.
Option "ShowCache" "boolean"
Enable or disable viewing offscreen memory. Used for debugging
only Default: off.
Option "18bitBus" "boolean"
Force the driver to assume that the flat panel has an 18bit data
bus. Default: off.
Option "Crt2Memory" "integer"
In a dual-head mode (69030 only) this option selects the amount
of memory to set aside for the second head. If not specified,
half the memory is used. Default: off.
Option "DualRefresh" "integer"
The 69030 supports independent refresh rates on its two display
channels. This mode of operations uses additional memory band‐
width and thus limits the maximum colour depth and refresh rate
that can be achieved, and so is off by default. Using this
option forces the use of an independent refresh rate on the two
screens. Default: off.
Option "FpMode" "boolean"
The driver probes the chip to find out if a flat panel (LCD) is
connected and active. If this is true it limits the possible
screen size to the maximum resolution of the panel. The chips is
initialized by the BIOS which may set the chip to 'dual' mode
even if no panel is connected. In this case the available reso‐
lution on the CRT is limited to the panel size the BIOS has set.
To tell the driver that no panel is connected despite of what
the BIOS is saying set this option to off. Don't set it to off
if a panel is connected. Default: value probed by BIOS.
SEE ALSOXorg(1), xorg.conf(5), Xserver(1), X(7)
You are also recommended to read the README.chips file that comes with
all Xorg distributions, which discusses the chips driver in more
detail.
AUTHORS
Authors include: Jon Block, Mike Hollick, Regis Cridlig, Nozomi Ytow,
Egbert Eich, David Bateman and Xavier Ducoin
X Version 11 xf86-video-chips 1.2.4 CHIPS(4)
