cimserver(8)cimserver(8)NAMEcimserver - start or stop the CIM Server; display the version number or
running status of the CIM Server
SYNOPSIScimserver [configProperty=value] ...
cimserver-s [ shutdownTimeout = value ]
This command can only be executed by a privileged user.
The cimserver command provides a command line interface to stop and
start the CIM Server, as well as to display the version number or run‐
ning status of the CIM Server.
After installation, the CIM Server must be started using the cimserver
command. If the system is rebooted, the CIM Server will automatically
restart, with the exception of the case where the CIM Server was shut‐
down prior to the reboot. Generally, once the CIM Server is started, it
is expected to be always running and ready to serve CIM requests. How‐
ever, if the CIM Server must be stopped and restarted, the cimserver
command can be used to shutdown the CIM Server gracefully and restart
it at a later time.
Starting the CIM Server
Issuing the cimserver command without any options starts the CIM Server
When starting the CIM Server using the cimserver command, the <config‐
Property=value> syntax can be used to set the configuration properties
to be used by the CIM Server. It is important to know that the values
specified in the cimserver command apply only to the current CIM Server
process that gets started. The default values for the configuration
properties do not change. For a list of the CIM Server configuration
properties, see the man page for the cimconfig command.
Shutting down the CIM Server
Issuing the cimserver command with the -s option stops the CIM Server.
Optionally, a timeout value can be specified by setting the shutdown‐
Timeout configuration property.
Under normal operation, CIM Server should be able to be shutdown fairly
quickly without problem. There are, however, situations that may pre‐
vent CIM Server from shutting down within a reasonable amount of time.
For example, a provider that is not responding to requests, or a
provider that is servicing a long-running CIM request. To handle such
situations and to ensure that the CIM Server can be shutdown without
having the user wait a long period of time (or indefinitely), a shut‐
down timeout value is used.
The shutdown timeout value is the maximum amount of time (in seconds)
the user is willing to wait for the CIM Server to complete all the out‐
standing CIM operation requests before shutting down the CIM Server.
If the specified shutdown timeout period expires, the CIM Server will
be shutdown even if there are CIM operations in progress. The shutdown
timeout value is a CIM Server configuration property (shutdownTimeout )
that can be changed using the command. The default shutdown timeout
value is 10 seconds.
A timeout value (in seconds) can be specified in the cimserver command
to shutdown the CIM Server using the =value> syntax. This overrides
the default shutdown timeout value. The minimum timeout value is 2
While CIM Server is shutting down, a client connection request will
result in a connection error (the same as if the CIM Server were not
running). For clients who have already established a connection to the
CIM Server, new CIM requests will be rejected with a CIM error indicat‐
ing that the CIM Server is shutting down.
When a client receives a response containing a CIM error indicating
that the CIM Server is shutting down, it should close the connection
and reconnect to CIM Server at a later time.
The cimserver command recognizes the following options:
-v, --version Display the version number or running status of
the CIM Server.
-h, --help Display the command usage.
--status Display the running status of the CIM Server.
-s Stop the CIM Server.
Specify the timeout value for shutting down the CIM Server.
This can only be used in conjunction with the -s
option. The minimum timeout value is 2 seconds.
If this is not specified, the default config‐
urable timeout value will be used.
Set the value for the specified configuration
property to be used in starting the CIM Server.
The cimserver command returns one of the following values:
The cimserver--status command returns one of the following values:
0 The CIM Server is running
2 The CIM Server is not running
When an error occurs, an error message is written to stderr and an
error value of 1 is returned.
unable to connect to CIM Server. CIM Server may not be running.
The cimserver command was issued to stop the CIM Server when CIM
Server was not running. An exit status value of 1 is returned.
Error: Bind failed: Failed to bind socket.
The cimserver command was issued to start the CIM Server and the
CIM Server was already running. An exit status value of 1 is
Stop the CIM Server with the default timeout value of 10 seconds.
Stop the CIM Server with a timeout value of 5 seconds.
Start the CIM Server.
Start the CIM Server with the configuration property enableNamespaceAu‐
thorization set to true.
Display the version number of the CIM Server. This version number is
used to identify the release version of the CIM Server in the OpenPega‐
Display the command usage.