create_bmp_for_stripline_coupler(1)create_bmp_for_stripline_coupler(1)NAMEcreate_bmp_for_stripline_coupler - bitmap generator for coupler with
thin striplines between two infinitely wide groundplanes (part of atlc)
SYNOPSIScreate_bmp_for_stripline_coupler [-C] [-b bitmapsize] [-v] H w s Er
outputfile
WARNING
This man page is not a complete set of documentation - the complexity
of the atlc project makes man pages not an ideal way to document it,
although out of completeness, man pages are produced. The best docu‐
mentation that was current at the time the version was produced should
be found on your hard drive, usually at
/usr/local/share/atlc/docs/html-docs/index.html
although it might be elsewhere if your system administrator chose to
install the package elsewhere. Sometimes, errors are corrected in the
documentation and placed at http://atlc.sourceforge.net/ before a new
release of atlc is released. Please, if you notice a problem with the
documentation - even spelling errors and typos, please let me know.
DESCRIPTIONcreate_bmp_for_stripline_coupler is a pre-processor for atlc, the
finite difference program that is used to calculate the properties of a
two and three conductor electrical transmission lines of arbitrary
cross section. The program create_bmp_for_stripline_coupler is used as
a fast way of generating bitmaps (there is no need to use a graphics
program), for a pair of 1 pixel thick conductors of width w, spaced a
distance s apart, inside a pair of groundplanes of separation H. This
has an exact analytical answer, when the inner is infinitely thin and
the overall width W is infinitely wide. This theoretical impedance is
calculated and printed to stderr if the -v option is given on cre‐
ate_bmp_for_stripline_coupler's command line.
----------------------------------------------------- ^
| | |
| Er | |
| | |
| ---------------------- | H
| <----w----><--s--><----w----> | |
| | |
| | |
| | |
----------------------------------------------------- v
<-------------------------W------------------------->
The overall width W is calculated internally to be large enough that
making it any larger will have negligible effect on the results. The
dielectric is assumed that of vacuum.
The bitmaps produced by create_bmp_for_stripline_coupler are 24-bit bit
colour bitmaps, as are required by atlc.
OPTIONS-C
Print the full copyright information and exit.
-b bitmapsize
is used to set the size of the bitmap, and so the accuracy to which
atlc is able to calculate the coupler's properties. The default value
for 'bitmapsize' is normally 18 although this can be set at compile
time. (see 'DEFAULT_COUPLER_BITMAP_SIZE' in definitions.h). The value
can be set anywhere from 6 to 28. The size of bitmap produced will be
between 2^(bitmapsize-1) and 2^(bitmapsize+1), so if its set to 28 the
bitmap could be as big as 512 Mb, which would take an eternity to com‐
pute.
-v
Print some extra data to stdout on the theoretical impedance of the
structure. This is useful to compare with the numerical result from
atlc
EXAMPLES
In the first example, a standard coupler is created, where the
eg1. create_bmp_for_stripline_coupler 1.23 0.7 1.2 1.0 coupler.bmp
eg2. create_bmp_for_stripline_coupler-b 8 1.23 0.7 3.3 small.bmp
eg3. create_bmp_for_stripline_coupler-v 12 1.23 0.7 4.8 theory.bmp
SEE ALSOatlc(1)create_bmp_for_circ_in_circ(1)create_bmp_for_circ_in_rect(1)create_bmp_for_microstrip_coupler(1)create_bmp_for_rect_cen_in_rect(1)create_bmp_for_rect_cen_in_rect_coupler(1) cre‐
ate_bmp_for_rect_in_circ(1)create_bmp_for_rect_in_rect(1) cre‐
ate_bmp_for_symmetrical_stripline(1)design_coupler(1) find_opti‐
mal_dimensions_for_microstrip_coupler(1)readbin(1)
http://atlc.sourceforge.net - Home page
http://sourceforge.net/projects/atlc - Download area
atlc-X.Y.Z/docs/html-docs/index.html - HTML docs
atlc-X.Y.Z/docs/qex-december-1996/atlc.pdf - theory paper
atlc-X.Y.Z/examples - examples
AUTHOR
Dr. David Kirkby PhD, drkirkby at ntlworld.com
COPYRIGHT
Copyright (c) 2002 Dr. David Kirkby.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 2 of the License, or (at your
option) any later version. This program is distributed in the hope
that it will be useful, but WITHOUT ANY WARRANTY; without even the
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR‐
POSE. See the GNU General Public License for more details. You should
have received a copy of the GNU General Public License (in the file
COPYING) along with this program. You may get a full copy of it by run‐
ning the program with the -C option. Otherwise you can write to the
Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
02111-1307, USA.
Dr. David Kirkby atlc-.4.6.0 6thcreate_bmp_for_stripline_coupler(1)
