ctdbd man page on Oracle
Printed from http://www.polarhome.com/service/man/?qf=ctdbd&af=0&tf=2&of=Oracle
CTDBD(1) CTDB - clustered TDB database CTDBD(1)
NAME
ctdbd - The CTDB cluster daemon
SYNOPSIS
ctdbd [OPTION...]
DESCRIPTION
ctdbd is the main CTDB daemon.
Note that ctdbd is not usually invoked directly. It is invoked via
ctdbd_wrapper(1) or via the initscript.
See ctdb(7) for an overview of CTDB.
GENERAL OPTIONS
-d, --debug=DEBUGLEVEL
This option sets the debug level to DEBUGLEVEL, which controls what
will be written to the logfile. The default is 0 which will only
log important events and errors. A larger number will provide
additional logging.
See the DEBUG LEVELS section in ctdb(7) for more information.
--dbdir=DIRECTORY
DIRECTORY on local storage where ctdbd keeps a local copy of TDB
databases. This directory is local for each node and should not be
stored on the shared cluster filesystem.
This directory would usually be /var/ctdb
--dbdir-persistent=DIRECTORY
DIRECTORY on local storage where ctdbd keeps a local copy of
persistent TDB databases. This directory is local for each node and
should not be stored on the shared cluster filesystem.
This directory would usually be /etc/ctdb/persistent
--dbdir-state=DIRECTORY
DIRECTORY on local storage where ctdbd keep internal state TDB
files. This directory is local for each node and should not be
stored on the shared cluster filesystem.
This directory would usually be /var/ctdb/state
--event-script-dir=DIRECTORY
DIRECTORY where the CTDB event scripts are stored. See the EVENT
SCRIPTS section in ctdb(7) for more information.
Default is CTDB_BASE/events.d, so usually /etc/ctdb/events.d, which
is part of the CTDB installation.
--logfile=FILENAME
FILENAME where ctdbd will write its log. This is usually
/var/log/log.ctdb.
--log-ringbuf-size=NUM
Set the size of the log ringbuffer to NUM entries.
CTDB uses an in-memory ringbuffer containing NUM most recent log
entries for all log levels (except DEBUG). The ringbugger can be
useful for extracting detailed logs even if some entries are not
logged to the regular logs.
Use the ctdb getlog command to retrieve log entries from the
ringbuffer.
--lvs
This option is used to activate the LVS capability on a CTDB node.
Please see the LVS section in ctdb(7) for more information.
--max-persistent-check-errors=NUM
NUM specifies the maximum number of health check failures allowed
for persistent databases during startup.
The default value is 0. Setting this to non-zero allows a node with
unhealthy persistent databases to startup and join the cluster as
long as there is another node with healthy persistent databases.
--nlist=FILENAME
FILENAME containing a list of the private IP addresses, one per
line, for each node in the cluster. This file must be the same on
each node in the cluster.
Default is CTDB_BASE/nodes, so usually /etc/ctdb/nodes.
--no-lmaster
This argument specifies that this node can NOT become an lmaster
for records in the database. This means that it will never show up
in the vnnmap. This feature is primarily used for making a cluster
span across a WAN link and use CTDB as a WAN-accelerator.
Please see the REMOTE CLUSTER NODES section in ctdb(7) for more
information.
--no-recmaster
This argument specifies that this node can NOT become a recmaster
for the database. This feature is primarily used for making a
cluster span across a WAN link and use CTDB as a WAN-accelerator.
Please see the REMOTE CLUSTER NODES section in ctdb(7) for more
information.
--notification-script=FILENAME
FILENAME specifying a script to be invoked by ctdbd when certain
state changes occur.
This file is usually /etc/ctdb/notify.sh.
Please see the NOTIFICATION SCRIPT section in ctdb(7) for more
information.
--pidfile=FILENAME
FILENAME for file containing process ID of main CTDB daemon. This
file is automatically created and removed by CTDB.
The default is to not create a PID file.
--public_addresses=FILENAME
FILENAME specifying a file containing the public IP addresses to
use on the cluster when CTDB should use IP takeover. This file
contains a list of IP addresses, netmasks and interfaces. CTDB will
distribute these public IP addresses appropriately across the
available nodes.
The IP addresses specified in this file can differ across nodes.
This is usually the file /etc/ctdb/public_addresses
--public-interface=INTERFACE
INTERFACE on which to attach public IP addresses or on which to
attach the single-public-ip when used.
When using public IP addresses, this is only required if interfaces
are not explicitly specified in the public addresses file.
--reclock=FILENAME
FILENAME is the name of the recovery lock file stored in shared
storage that ctdbd uses to prevent split brains from occuring.
It is possible to run CTDB without a recovery lock file, but then
there will be no protection against split brain if the
cluster/network becomes partitioned. Using CTDB without a reclock
file is strongly discouraged.
--single-public-ip=IPADDR
IPADDR specifies the single IP that CTDB will use in conjuction
with LVS.
Please see the LVS section in ctdb(7) for more information.
--start-as-disabled
This makes ctdbd start in the DISABLED state.
To allow the node to host public IP addresses and services, it must
be manually enabled using the ctdb enable command.
Please see the NODE STATES section in ctdb(7) for more information
about the DISABLED state.
--start-as-stopped
This makes ctdbd start in the STOPPED state.
To allow the node to take part in the cluster it must be manually
continued with the the ctdb enable command.
Please see the NODE STATES section in ctdb(7) for more information
about the STOPPED state.
--syslog
Send log messages to syslog instead of the CTDB logfile. This
option overrides --logfile. The default is to log to a file.
--transport=tcp|infiniband
This option specifies which transport to use for ctdbd internode
communications. The default is "tcp".
The "infiniband" support is not regularly tested.
-?, --help
Display a summary of options.
DEBUGGING OPTIONS
-i, --interactive
Enable interactive mode. This will make ctdbd run in the foreground
and not detach from the terminal. By default ctdbd will detach
itself and run in the background as a daemon.
--listen=IPADDR
This specifies which IP address that ctdbd will bind to.
By default ctdbd will bind to the first address it finds in the
/etc/ctdb/nodes file that is also present on the local system.
This option is only required when you want to run multiple ctdbd
daemons/nodes on the same physical host in which case there would
be multiple entries in /etc/ctdb/nodes that would match a local
interface.
--nopublicipcheck
This option is used when testing with multiple local daemons on a
single machine. It disables checks related to public IP addresses.
--nosetsched
This is a debugging option. This option is only used when debugging
ctdbd.
Normally ctdbd will change its scheduler to run as a real-time
process. This is the default mode for a normal ctdbd operation to
gurarantee that ctdbd always gets the CPU cycles that it needs.
This option is used to tell ctdbd to not run as a real-time process
and instead run ctdbd as a normal userspace process. This is useful
for debugging and when you want to run ctdbd under valgrind or gdb.
(You don't want to attach valgrind or gdb to a real-time process.)
--socket=FILENAME
FILENAME specifies the name of the Unix domain socket that ctdbd
will create. This socket is used by local clients to communicate
with ctdbd.
The default is /tmp/ctdb.socket . You only need to use this option
if you plan to run multiple ctdbd daemons on the same physical
host, usually for testing.
--script-log-level=DEBUGLEVEL
This option sets the debug level of event script output to
DEBUGLEVEL. The default is ERR (0).
See the DEBUG LEVELS section in ctdb(7) for more information.
--sloppy-start
This is debugging option. This speeds up the initial recovery
during startup at the expense of some consistency checking. Don't
use this option in production.
--torture
This option is only used for development and testing of CTDB. It
adds artificial errors and failures to the common codepaths in
ctdbd to verify that ctdbd can recover correctly from failures.
Do not use this option unless you are developing and testing new
functionality in CTDB.
--valgrinding
This is a debugging option. This option is only used when debugging
ctdbd. This enables additional debugging capabilities and implies
--nosetsched.
SEE ALSO
ctdb(1), ctdbd_wrapper(1), onnode(1), ctdb(7), ctdb-tunables(7),
http://ctdb.samba.org/
AUTHOR
This documentation was written by Ronnie Sahlberg, Amitay Isaacs,
Martin Schwenke
COPYRIGHT
Copyright © 2007 Andrew Tridgell, Ronnie Sahlberg
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 3 of the License, or (at your
option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, see http://www.gnu.org/licenses.
ctdb 11/27/2013 CTDBD(1)
[top]
List of man pages available for Oracle
Copyright (c) for man pages and the logo by the respective OS vendor.
For those who want to learn more, the polarhome community provides shell access and support.
[legal]
[privacy]
[GNU]
[policy]
[cookies]
[netiquette]
[sponsors]
[FAQ]
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
|
Vote for polarhome
|