cue2toc man page on aLinux

Man page or keyword search:  
man Server   7435 pages
apropos Keyword Search (all sections)
Output format
aLinux logo
[printable version]

CUE2TOC(1)							    CUE2TOC(1)

       cue2toc - convert CUE to TOC format

       cue2toc [-hnqv] [-o tocfile] [-w wavefile] [cuefile]

       Cue2toc	converts  cuefile from CUE to TOC format and writes the result
       to tocfile.  If either cuefile or tocfile is omitted or a  single  dash
       "-"  cue2toc  reads  from  standard  input and writes to standard ouput

       CUE files are text files describing the layout of a  CD-Rom  and	 typi‐
       cally carry the extension ".cue".

       Cdrdao  is a CD-burning application which has its own native TOC format
       to describe the disc layout. Although cdrdao  has  direct  support  for
       reading	CUE  files,  it	 is  currently limited to data tracks only. So
       cue2toc's main usefulness lies in converting CUE files containing audio

       Output of CD-Text data can be disabled with the -n option.

       CUE  files  often  come	with MP3 files but since cdrdao doesnt support
       decoding them on the fly they probably must be decoded by  other	 means
       prior  to  writing  the	CD (e.g. using lame).  For this reason you can
       specify a filename with the -w option to be used for all	 audio	tracks
       instead	of the one in the CUE file. Of course this is only really use‐
       ful if all the tracks are based on the same file. This seems to be  the
       case quite often however.

       Cue2toc normally displays warning messages for unsupported commands and
       constructs. The -q option disables these warnings.

       -h     print a short help message

       -n     no CD-Text; disable output of CD-Text information

       -o tocfile
	      write result to tocfile instead of standard ouput

       -q     quiet mode; do not print warnings

       -v     print version number

       -w wavefile
	      use wavefile for all audio tracks

       What follows is a description of the CUE format	expected  by  cue2toc.
       For  information about the TOC format please consult the cdrdao(1) man‐
       ual page.

       CUE files consist of commands and their arguments which must  be	 sepa‐
       rated  from  each other by any number of whitespace characters.	Space,
       horizontal tabulator, newline and carriage  return  are	recognized  as
       whitespace  characters  except  inside  strings	surrounded  by	double
       quotes, where they are part of the string. Commands are not case sensi‐
       tive. CD-Text data can be at most 80 characters per item.

       Timecode	 values are accepted in the forms "X:X:X", "X:X" and "X" where
       each "X" must consist of at most two digits and may be zero  padded  to
       the  left.  They are interpreted as "M:S:F", "S:F" and "F" respectively
       where "M" means "minutes" and must be in the range 0 <= M  <=  99,  "S"
       means  "seconds"	 and  must be in the range 0 <= S <= 59, and "F" means
       "frames" and must be in the range 0 <= F <= 74.

       CUE files are logically divided into a global section  and  one	to  99
       track  sections.	 Inside	 these	sections  the  following  commands are

   Global Section
       REM anything_to_newline
       CATALOG string
       CDTEXTFILE string
       TITLE string
       PERFORMER string
       SONGWRITER string

       REM    Optional.	 Introduces a comment. Anything from there  on	up  to
	      and  including  the  next newline character is ignored. Comments
	      can appear anywhere in the file but not between  a  command  and
	      its arguments.

	      Optional.	 The Media Catalog Number of the disc. Must be exactly
	      13 characters.

	      Optional.	 Specifies an external file containing	CD-Text	 data.

       TITLE  Optional.	 The CD-Text title of the disc.

	      Optional.	 The CD-Text performer of the disc.

	      Optional.	 The CD-Text songwriter of the disc.

       FILE   Required.	 The name and type of the file to be used for all fol‐
	      lowing tracks.  The string contains the name of  the  file  fol‐
	      lowed  by one of BINARY, MOTOROLA, AIFF, WAVE or MP3.  As far as
	      cue2toc is  concerned  the  type	of  the	 file  is  effectively
	      ignored.	Nonetheless MOTOROLA, AIFF and MP3 cause printing of a
	      warning message since these file types can not be used  directly
	      with cdrdao.

       The  first  appearance  of a TRACK command causes leaving of the global
       section and entering the track section.

   Track Section
       TRACK number mode
       REM anything_to_newline
       FLAGS [DCP] [4CH] [PRE] [SCMS]
       ISRC string
       TITLE string
       PERFORMER string
       SONGWRITER string
       PREGAP timecode
       INDEX number timecode
       POSTGAP timecode

       TRACK  Required.	 Starts a new track definition. The number is ignored.
	      The   mode   must	 be  one  of  AUDIO,  MODE1/2048,  MODE1/2352,
	      MODE2/2336 or MODE2/2352.

       FLAGS  Optional.	 Defines the flags for this track. Must be followed by
	      one or more of the following commands: DCP (digital copy permit‐
	      ted), 4CH (four channel audio), PRE (pre-emphasis	 enabled)  and
	      SCMS  (serial  copy management system).  SCMS is ignored because
	      there is no corresponding option in the TOC format.

       ISRC   Optional.	 The International Standard Recording  Code  for  this
	      track. Must be exactly 12 characters long.

       TITLE  Optional.	 The CD-Text title of this track.

	      Optional.	 The CD-Text performer of this track.

	      Optional.	 The CD-Text songwriter of this track.

       PREGAP Optional.	 The length of the track pregap to be filled with zero
	      data.  Mutually exclusive with INDEX 0.

	      Optional.	 The length of the track postgap  to  be  filled  with
	      zero data.

       INDEX  Optional.	  The  number  must be in the range 0 <= number <= 99.
	      Index number 1 specifies the start of the track. Index number  0
	      is the start of the track pregap filled with data from the file,
	      i.e. the difference between index 0 and index 1 is the length of
	      the  pregap.  Index  0 is mutually exclusive with PREGAP.	 Index
	      numbers greater than 1 specify subindexes	 for  this  track  and
	      must be sequential.

       FILE   Optional	in  track section. The syntax is the same as described
	      above and if it appears inside a track  specification  it	 takes
	      effect on the next TRACK command.

       The  command CDTEXTFILE and the flag SCMS have no equivalent in the TOC
       format and are ignored.

       CUE files containing data tracks which specify a starting time  greater
       than  zero  cannot  be converted by cue2toc because the TOC format does
       not provide a way to specify a starting time at all  for	 data  tracks.
       However	if  the CUE file does not contain any audio tracks you can try
       to use the CUE file directly with cdrdao.

       Suppose we have the following CUE file "uwe.froehn.cue"	describing  an
       audio CD with CD-Text data:

	   REM Example CUE file with audio tracks
	   CATALOG 1234567890123
	   TITLE "Der Berg ruft"
	   PERFORMER "Uwe Froehn"
	   FILE "uwe.froehn.mp3" MP3

	     TITLE "Meine Mama ist die Beste"
	     PERFORMER "Uwe Froehn"
	     SONGWRITER "Hansi Klabuster"
	     REM two seconds pregap filled with audio data
	     INDEX 00 00:00:00
	     INDEX 01 00:02:00
	     REM subindexes
	     INDEX 02 00:35:17
	     INDEX 03 01:12:44

	     TITLE "Hoch oben im Tal"
	     SONGWRITER "Gabi Geil"
	     REM no pregap
	     INDEX 01 02:45:38

	     REM pregap with zero data
	     PREGAP 00:4:47
	     INDEX 01 07:58:74
	     REM postgap with zero data
	     POSTGAP 00:35:00

       Since  cdrdao  cannot  decode the MP3 file on the fly this step must be
       carried out by hand, e.g. using lame:

	   lame --decode uwe.froehn.mp3 uwe.froehn.wav

       Although the filename appears only once in the example CUE file it gets
       written	for every track in the TOC file so you would need to edit lots
       of occurences of the filename in the TOC file by hand. For this	reason
       you  can	 specify  a string with the -w option to be used by cue2toc as
       the filename for all audio tracks. The command

	   cue2toc -w uwe.froehn.wav -o uwe.froehn.toc uwe.froehn.cue

       should produce the file uwe.froehn.toc with the following content:

	   CATALOG "1234567890123"
	   CD_TEXT {
	       LANGUAGE_MAP {
		   0 : EN
	       LANGUAGE 0 {
		   TITLE "Der Berg ruft"
		   PERFORMER "Uwe Froehn"

	       CD_TEXT {
		   LANGUAGE 0 {
		       TITLE "Meine Mama ist die Beste"
		       PERFORMER "Uwe Froehn"
		       SONGWRITER "Hansi Klabuster"
	       AUDIOFILE "uwe.froehn.wav" 00:00:00 02:45:38
	       START 00:02:00
	       INDEX 00:35:17
	       INDEX 01:12:44

	       CD_TEXT {
		   LANGUAGE 0 {
		       TITLE "Hoch oben im Tal"
		       SONGWRITER "Gabi Geil"
	       AUDIOFILE "uwe.froehn.wav" 02:45:38 05:13:36

	       PREGAP 00:04:47
	       AUDIOFILE "uwe.froehn.wav" 07:58:74
	       SILENCE 00:35:00

       cdrdao(1), lame(1)

       Since cue2toc's definition of the CUE format is	entirely  based	 on  a
       number  of  different  CUE files the author came across there is a very
       high probability that it will not work correctly with all the other CUE
       files  you might encounter. If this is the case for you please send the
       problematic CUE file along with the version number of cue2toc to	 <der‐>.

       Matthias Czapla <>


List of man pages available for aLinux

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
Vote for polarhome
Free Shell Accounts :: the biggest list on the net