cxgb man page on FreeBSD

Man page or keyword search:  
man Server   9747 pages
apropos Keyword Search (all sections)
Output format
FreeBSD logo
[printable version]

CXGB(4)			 BSD Kernel Interfaces Manual		       CXGB(4)

NAME
     cxgb — Chelsio T3 10 Gigabit Ethernet adapter driver

SYNOPSIS
     To compile this driver into the kernel, place the following lines in your
     kernel configuration file:

	   device firmware
	   device cxgb

     To load the driver as a module at boot time, place the following line in
     loader.conf(5):

	   if_cxgb_load="YES"

DESCRIPTION
     The cxgb driver supports Transmit/Receive checksum offload, Jumbo Frames,
     TCP segmentation offload (TSO), Large Receive Offload (LRO), VLAN hard‐
     ware insertion / extraction, and VLAN checksum offload.  For further
     hardware information, see http://www.chelsio.com/.

     For questions related to hardware requirements, refer to the documenta‐
     tion supplied with your Chelsio T3 adapter.  All hardware requirements
     listed apply to use with FreeBSD.

     Support for Jumbo Frames is provided via the interface MTU setting.
     Selecting an MTU larger than 1500 bytes with the ifconfig(8) utility con‐
     figures the adapter to receive and transmit Jumbo Frames.	The maximum
     MTU size for Jumbo Frames is 9000.

     For more information on configuring this device, see ifconfig(8).

HARDWARE
     The cxgb driver supports 10 Gigabit and 1 Gigabit Ethernet adapters based
     on the T3 and T3B chipset:

     ·	 Chelsio 10GBase-CX4
     ·	 Chelsio 10GBase-LR
     ·	 Chelsio 10GBase-SR

LOADER TUNABLES
     Tunables can be set at the loader(8) prompt before booting the kernel or
     stored in loader.conf(5).

DIAGNOSTICS
     cxgb%d: Unable to allocate bus resource: memory  A fatal initialization
     error has occurred.

     cxgb%d: Unable to allocate bus resource: interrupt	 A fatal initializa‐
     tion error has occurred.

     cxgb%d: Could not find firmware image %s  The appropriate firmware kld
     module was not installed.	This is a fatal initialization error.

SUPPORT
     For general information and support, go to the Chelsio support website
     at: http://www.chelsio.com/.

     If an issue is identified with the released source code on the supported
     kernel with a supported adapter, email the specific information related
     to the issue to ⟨support@chelsio.com⟩.

SEE ALSO
     altq(4), arp(4), netintro(4), ng_ether(4), ifconfig(8)

HISTORY
     The cxgb device driver first appeared in FreeBSD 6.3 and FreeBSD 7.0.

AUTHORS
     The cxgb driver was written by Kip Macy ⟨kmacy@FreeBSD.org⟩ with substan‐
     tial support from Scott Long ⟨scottl@FreeBSD.org⟩.

BSD				March 14, 2007				   BSD
[top]

List of man pages available for FreeBSD

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net