dictionary(5)dictionary(5)NAMEdictionary - RADIUS dictionary file
DESCRIPTION
The master RADIUS dictionary file resides in /etc/raddb/dictionary. It
references other dictionary files located in /usr/local/share/freera‐
dius/. Each dictionary file contains a list of RADIUS attributes and
values, which the server uses to map between descriptive names and on-
the-wire data. The names have no meaning outside of the RADIUS server
itself, and are never exchanged between server and clients.
That is, editing the dictionaries will have NO EFFECT on anything other
than the server that is reading those files. Adding new attributes to
the dictionaries will have NO EFFECT on RADIUS clients, and will not
make RADIUS clients magically understand those attributes. The dictio‐
naries are solely for local administrator convenience, and are specific
to each version of FreeRADIUS.
The dictionaries in /usr/local/share SHOULD NOT be edited unless you
know exactly what you are doing. Changing them will most likely break
your RADIUS deployment.
If you need to add new attributes, please edit the /etc/raddb/dictio‐
nary file. It's sole purpose is to contain site-local defintions that
are added by the local administrator.
FORMAT
Every line starting with a hash sign ('#') is treated as comment and
ignored.
Each line of the file can contain one of the following strings:
ATTRIBUTE name oid type [flags]
Define a RADIUS attribute name to number mapping.
The name field is a printable field, taken from various specifica‐
tions or vendor definitions. It is most commonly used as a series
of words, separated by hyphens. e.g. "User-Name". Vendor-spe‐
cific attributes (VSAs) are prefixed by the vendor name, e.g.
"Cisco-AVPair". The names should be globally unique, as they are
used as a key to look up the properties of the attribute.
The oid field is taken from the relevant specification for that
name. In most cases, it is a decimal number, such as "256". For
certain attributes, a "dotted number" notation is used, e.g.
"1.2". The "dotted number" notation is used only for certain
attributes.
The type field can be one of the standard types:
string UTF-8 printable text (the RFCs call this "text")
octets opaque binary data (the RFCs call this "string")
ipaddr IPv4 address
date Seconds since January 1, 1970 (32-bits)
integer 32-bit unsigned integer
ipv6addr IPv6 Address
ipv6prefix IPV6 prefix, with mask
ifid Interface Id (hex:hex:hex:hex)
integer64 64-bit unsigned integer
The type field can be one of the following non-standard types:
ether Ethernet MAC address
abinary Ascend binary filter format
byte 8-bit unsigned integer
short 16-bit unsigned integer
signed 31-bit signed integer (packed into 32-bit field)
tlv Type-Length-Value (allows nested attributes)
ipv4prefix IPv4 Prefix as given in RFC 6572.
The last (optional) field of an attribute definition are addi‐
tional flags for that attribute, in a comma-separated list. Pre‐
vious versions of the server allowed these flags to include a ven‐
dor name. This behavior may still work, but it is deprecated, and
is not recommended.
The options are:
encrypt=# set encryption type 1, 2, or 3.
has_tag The attribute can have an RFC 2868 style tag
The "encrypt" flag marks the attribute as being encrypted with one
of three possible methods. "1" means that the attribute is
encrypted with the method as defined in RFC2865 for the User-Pass‐
word attribute. "2" means that the password is encrypted with the
method as defined in RFC2868 for the Tunnel-Password attribute.
"3" means that the attribute is encrypted as per Ascend's defini‐
tions for the Ascend-Send-Secret attribute.
The "has_tag" flag marks the attribute as being permitted to have
a tag, as defined in RFC2868. The purpose of the tag is to allow
grouping of attributes for tunneled users. See RFC2868 for more
details.
When the server receives an encoded attribute in a RADIUS packet,
it looks up that attribute by number in the dictionary, and uses
the definition found there for printing diagnostic and log mes‐
sages. When the server sees an attribute name in a configuration
file, it looks up that attribute by name in the dictionary, and
uses the definition found there.
VALUE attribute-name value-name number
Define an attribute value name to number mapping, for an attribute
of type integer. The attribute-name field MUST be previously
defined by an ATTRIBUTE entry. The value-name field can be any
non-space text, but is usually taken from RFC2865, or other docu‐
ments.. The number field is also taken from the relevant docu‐
ments, for that name.
When the server receives an encoded value in a RADIUS packet, it
looks up the value of that attribute by number in the dictionary,
and uses the name found there for printing diagnostic and log mes‐
sages.
VENDOR vendor-name number [format=...]
Define a Vendor Specific Attribute encapsulation for vendor-name
to number. For a list of vendor names and numbers, see
http://www.iana.org/enterprise-numbers.txt.
The "format=t,l" statement tells the server how many octets to use
to encode/decode the vendor "type" and "length" fields in the
attributes. The default is "format=1,1", which does not have to
be specified. For USR VSA's, the format is "format=4,0", for
Lucent VSA's it's "format=2,1", and for Starent VSA's it's "for‐
mat=2,2".
The supported values for the number of type octets (i.e. the first
digit) are 1, 2, and 4. The support values for the number of
length octets (i.e. the second digit) are 0, 1, and 2. Any combi‐
nation of those values will work.
You can also use "format=Extended-Vendor-Specific-1", through
"format=Extended-Vendor-Specific-6". These define VSAs in the
"extended vendor-specific" space.
BEGIN-VENDOR vendor-name
Define the start of a block of Vendor-Specific attributes. All of
the following ATTRIBUTE definitions are interpreted as being for
the named vendor, until the block is closed by an "END-VENDOR"
statement.
This practice is preferred to placing the vendor name at the end
of an ATTRIBUTE definition.
END-VENDOR vendor-name
End a previously defined BEGIN-VENDOR block. The "vendor-name"
must match.
$INCLUDE filename
Include dictionary entries from the file filename. The filename
is taken as relative to the location of the file which is asking
for the inclusion.
BEGIN-TLV name
This feature is supported for backwards compatibility with older
dictionaries. It should not be used. The new "oid" form for
defining the attribute number should be used instead.
END-TLV name
This feature is supported for backwards compatibility with older
dictionaries. It should not be used. The new "oid" form for
defining the attribute number should be used instead.
FILES
/etc/raddb/dictionary, /usr/share/freeradius/dictionary.*
SEE ALSOradiusd(8), naslist(5), RFC2865, RFC2866, RFC2868
16 Mar 2011 dictionary(5)
