FENCE_AGENT(8)FENCE_AGENT(8)NAMEfence_brocade - Fence agent for HP Brocade over telnet/ssh
DESCRIPTIONfence_brocade is an I/O Fencing agent which can be used with Brocade FC
switches. It logs into a Brocade switch via telnet and disables a spec‐
ified port. Disabling the port which a machine is connected to effec‐
tively fences that machine. Lengthy telnet connections to the switch
should be avoided while a GFS cluster is running because the connec‐
tion will block any necessary fencing actions. After a fence operation
has taken place the fenced machine can no longer connect to the Brocade
FC switch. When the fenced machine is ready to be brought back into
the GFS cluster (after reboot) the port on the Brocade FC switch needs
to be enabled. This can be done by running fence_brocade and specifying
the enable action
fence_brocade accepts options on the command line as well as from
stdin. Fenced sends parameters through stdin when it execs the agent.
fence_brocade can be run by itself with command line options. This is
useful for testing and for turning outlets on or off from scripts.
Vendor URL: http://www.brocade.com
PARAMETERS-a, --ip=[ip]
IP Address or Hostname This parameter is always required.
-l, --username=[name]
Login Name This parameter is always required.
-p, --password=[password]
Login password or passphrase
-c, --command-prompt=[prompt]
Force Python regex for command prompt (Default Value: ['> '])
-x, --ssh
SSH connection
-n, --plug=[id]
Physical plug number, name of virtual machine or UUID This
parameter is always required.
-u, --ipport=[port] TCP/UDP port to use (default 23, 22 if --ssh
TCP/UDP port to use for connection with device (Default Value:
23)
-4, --inet4-only
Forces agent to use IPv4 addresses only
-6, --inet6-only
Forces agent to use IPv6 addresses only
-S, --password-script=[script]
Script to retrieve password
-k, --identity-file=[filename]
Identity file for ssh
--ssh-options=[options]
SSH options to use
-o, --action=[action]
Fencing Action (Default Value: reboot)
-v, --verbose
Verbose mode
-D, --debug-file=[debugfile]
Write debug information to given file
-V, --version
Display version information and exit
-h, --help
Display help and exit
-C, --separator=[char]
Separator for CSV created by operation list (Default Value: ,)
--power-timeout=[seconds]
Test X seconds for status change after ON/OFF (Default Value:
20)
--shell-timeout=[seconds]
Wait X seconds for cmd prompt after issuing command (Default
Value: 3)
--login-timeout=[seconds]
Wait X seconds for cmd prompt after login (Default Value: 5)
--power-wait=[seconds]
Wait X seconds after issuing ON/OFF (Default Value: 0)
--delay=[seconds]
Wait X seconds before fencing is started (Default Value: 0)
--retry-on=[attempts]
Count of attempts to retry power on (Default Value: 1)
ACTIONS
on Power on machine.
off Power off machine.
status This returns the status of the plug/virtual machine.
list List available plugs with aliases/virtual machines if there is
support for more then one device. Returns N/A otherwise.
monitor
Check the health of fence device
metadata
Display the XML metadata describing this resource.
STDIN PARAMETERS
ipaddr IP Address or Hostname This parameter is always required.
login Login Name This parameter is always required.
passwd Login password or passphrase
cmd_prompt
Force Python regex for command prompt (Default Value: ['> '])
secure SSH connection
port Physical plug number, name of virtual machine or UUID This
parameter is always required.
ipport TCP/UDP port to use for connection with device (Default Value:
23)
inet4_only
Forces agent to use IPv4 addresses only
inet6_only
Forces agent to use IPv6 addresses only
passwd_script
Script to retrieve password
identity_file
Identity file for ssh
ssh_options
SSH options to use
action Fencing Action (Default Value: reboot)
verbose
Verbose mode
debug Write debug information to given file
version
Display version information and exit
help Display help and exit
separator
Separator for CSV created by operation list (Default Value: ,)
power_timeout
Test X seconds for status change after ON/OFF (Default Value:
20)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default
Value: 3)
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
delay Wait X seconds before fencing is started (Default Value: 0)
retry_on
Count of attempts to retry power on (Default Value: 1)
fence_brocade (Fence Agent) 2009-10-20 FENCE_AGENT(8)
