fence_drac5 man page on RedHat

Man page or keyword search:  
man Server   29550 pages
apropos Keyword Search (all sections)
Output format
RedHat logo
[printable version]


FENCE_AGENT(8)							FENCE_AGENT(8)

NAME
       fence_drac5 - Fence agent for Dell DRAC CMC/5

DESCRIPTION
       fence_drac5  is	an  I/O	 Fencing agent which can be used with the Dell
       Remote Access Card v5 or CMC (DRAC). This device provides remote access
       to  controlling	 power	to a server. It logs into the DRAC through the
       telnet/ssh interface of the card. By default, the telnet	 interface  is
       not  enabled.

       fence_drac5  accepts options on the command line as well as from stdin.
       Fenced  sends  parameters  through  stdin  when	it  execs  the	agent.
       fence_drac5  can	 be  run by itself with command line options.  This is
       useful for testing and for turning outlets on or off from scripts.

       Vendor URL: http://www.dell.com

PARAMETERS

       -a, --ip=[ip]
	      IP Address or Hostname This parameter is always required.

       -l, --username=[name]
	      Login Name This parameter is always required.

       -p, --password=[password]
	      Login password or passphrase

       -c, --command-prompt=[prompt]
	      Force Python regex for command prompt  (Default  Value:  ['\$'])

       -x, --ssh
	      SSH connection

       -d, --drac-version=[version]
	      Force DRAC version to use

       -n, --plug=[id]
	      Physical	plug  number,  name  of	 virtual  machine or UUID This
	      parameter is always required.

       -u, --ipport=[port] TCP/UDP port to use (default 23, 22 if --ssh
	      TCP/UDP port to use for connection with device  (Default	Value:
	      23)

       -4, --inet4-only
	      Forces agent to use IPv4 addresses only

       -6, --inet6-only
	      Forces agent to use IPv6 addresses only

       -S, --password-script=[script]
	      Script to retrieve password

       -k, --identity-file=[filename]
	      Identity file for ssh

       --ssh-options=[options]
	      SSH options to use

       -o, --action=[action]
	      Fencing Action (Default Value: reboot)

       -v, --verbose
	      Verbose mode

       -D, --debug-file=[debugfile]
	      Write debug information to given file

       -V, --version
	      Display version information and exit

       -h, --help
	      Display help and exit

       -C, --separator=[char]
	      Separator	 for  CSV created by operation list (Default Value: ,)

       --power-timeout=[seconds]
	      Test X seconds for status change after  ON/OFF  (Default	Value:
	      20)

       --shell-timeout=[seconds]
	      Wait  X  seconds	for  cmd prompt after issuing command (Default
	      Value: 3)

       --login-timeout=[seconds]
	      Wait X seconds for cmd prompt after  login  (Default  Value:  5)

       --power-wait=[seconds]
	      Wait X seconds after issuing ON/OFF (Default Value: 0)

       --delay=[seconds]
	      Wait  X  seconds	before	fencing	 is started (Default Value: 0)

       --retry-on=[attempts]
	      Count of attempts to retry power on (Default Value: 1)

ACTIONS

       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       list   List available plugs with aliases/virtual machines if  there  is
	      support for more then one device. Returns N/A otherwise.

       monitor
	      Check the health of fence device

       metadata
	      Display the XML metadata describing this resource.

STDIN PARAMETERS

       ipaddr IP Address or Hostname This parameter is always required.

       login  Login Name This parameter is always required.

       passwd Login password or passphrase

       cmd_prompt
	      Force  Python  regex  for command prompt (Default Value: ['\$'])

       secure SSH connection

       drac_version
	      Force DRAC version to use

       port   Physical plug number, name  of  virtual  machine	or  UUID  This
	      parameter is always required.

       ipport TCP/UDP  port  to use for connection with device (Default Value:
	      23)

       inet4_only
	      Forces agent to use IPv4 addresses only

       inet6_only
	      Forces agent to use IPv6 addresses only

       passwd_script
	      Script to retrieve password

       identity_file
	      Identity file for ssh

       ssh_options
	      SSH options to use

       action Fencing Action (Default Value: reboot)

       verbose
	      Verbose mode

       debug  Write debug information to given file

       version
	      Display version information and exit

       help   Display help and exit

       separator
	      Separator for CSV created by operation list (Default  Value:  ,)

       power_timeout
	      Test  X  seconds	for status change after ON/OFF (Default Value:
	      20)

       shell_timeout
	      Wait X seconds for cmd prompt  after  issuing  command  (Default
	      Value: 3)

       login_timeout
	      Wait  X  seconds	for  cmd prompt after login (Default Value: 5)

       power_wait
	      Wait X seconds after issuing ON/OFF (Default Value: 0)

       delay  Wait X seconds before fencing  is	 started  (Default  Value:  0)

       retry_on
	      Count of attempts to retry power on (Default Value: 1)

fence_drac5 (Fence Agent)	  2009-10-20			FENCE_AGENT(8)
[top]

List of man pages available for RedHat

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net