firewall-cmd man page on OpenMandriva

Man page or keyword search:  
man Server   8135 pages
apropos Keyword Search (all sections)
Output format
OpenMandriva logo
[printable version]

FIREWALL-CMD(1)			 firewall-cmd		       FIREWALL-CMD(1)

NAME
       firewall-cmd - firewalld command line client

SYNOPSIS
       firewall-cmd [OPTIONS...]

DESCRIPTION
       firewall-cmd is the command line client of the firewalld daemon. It
       provides interface to manage runtime and permanent configuration.

       The runtime configuration in firewalld is separated from the permanent
       configuration. This means that things can get changed in the runtime or
       permanent configuration.

OPTIONS
       The following options are supported:

   General Options
       -h, --help
	   Prints a short help text and exits.

       -V, --version
	   Print the version string of firewalld. This option is not
	   combinable with other options.

       -q, --quiet
	   Do not print status messages.

   Status Options
       --state
	   Check whether the firewalld daemon is active (i.e. running).
	   Returns an exit code 0 if it is active, NOT_RUNNING otherwise (see
	   the section called “EXIT CODES”). This will also print the state to
	   STDOUT.

       --reload
	   Reload firewall rules and keep state information. Current permanent
	   configuration will become new runtime configuration, i.e. all
	   runtime only changes done until reload are lost with reload if they
	   have not been also in permanent configuration.

       --complete-reload
	   Reload firewall completely, even netfilter kernel modules. This
	   will most likely terminate active connections, because state
	   information is lost. This option should only be used in case of
	   severe firewall problems. For example if there are state
	   information problems that no connection can be established with
	   correct firewall rules.

   Permanent Options
       --permanent
	   The permanent option --permanent can be used to set options
	   permanently. These changes are not effective immediately, only
	   after service restart/reload or system reboot. Without the
	   --permanent option, a change will only be part of the runtime
	   configuration. The --permanent option can not be used with all
	   options.

	   If you want to make a change in runtime and permanent
	   configuration, use the same call with and without the--permanent
	   option.

	   The --permanent option can be optionally added to all options
	   further down where it is supported.

   Zone Options
       --get-default-zone
	   Print default zone for connections and interfaces.

       --set-default-zone=zone
	   Set default zone for connections and interfaces where no zone has
	   been selected. Setting the default zone changes the zone for the
	   connections or interfaces, that are using the default zone.

	   This is a runtime and permanent change.

       --get-active-zones
	   Print currently active zones altogether with interfaces and sources
	   used in these zones. Active zones are zones, that have a binding to
	   an interface or source. The output format is:

	       zone1
		 interfaces: interface1 interface2 ..
		 sources: source1 ..
	       zone2
		 interfaces: interface3 ..
	       zone3
		 sources: source2 ..

	   If there are no interfaces or sources bound to the zone, the
	   corresponding line will be omitted.

       [--permanent] --get-zones
	   Print predefined zones as a space separated list.

       [--permanent] --get-services
	   Print predefined services as a space separated list.

       [--permanent] --get-icmptypes
	   Print predefined icmptypes as a space separated list.

       [--permanent] --get-zone-of-interface=interface
	   Print the name of the zone the interface is bound to or no zone.

       [--permanent] --get-zone-of-source=source[/mask]
	   Print the name of the zone the source[/mask] is bound to or no
	   zone.

       [--permanent] --list-all-zones
	   List everything added for or enabled in all zones. The output
	   format is:

	       zone1
		 interfaces: interface1 ..
		 sources: source1 ..
		 services: service1 ..
		 ports: port1 ..
		 forward-ports:
		       forward-port1
		       ..
		 icmp-blocks: icmp-type1 ..
		 rich rules:
		       rich-rule1
		       ..
	       ..

       --permanent --new-zone=zone
	   Add a new permanent zone.

       --permanent --delete-zone=zone
	   Delete an existing permanent zone.

       --permanent [--zone=zone] --get-target
	   Get the target of a permanent zone.

       --permanent [--zone=zone] --set-target=target
	   Set the target of a permanent zone.	target is one of: default,
	   ACCEPT, DROP, %%REJECT%%

   Options to Adapt and Query Zones
       Options in this section affect only one particular zone. If used with
       --zone=zone option, they affect the zone zone. If the option is
       omitted, they affect default zone (see --get-default-zone).

       [--permanent] [--zone=zone] --list-all
	   List everything added for or enabled in zone. If zone is omitted,
	   default zone will be used.

       [--permanent] [--zone=zone] --list-services
	   List services added for zone as a space separated list. If zone is
	   omitted, default zone will be used.

       [--permanent] [--zone=zone] --add-service=service [--timeout=seconds]
	   Add a service for zone. If zone is omitted, default zone will be
	   used. This option can be specified multiple times. If a timeout is
	   supplied, the rule will be active for the amount of seconds and
	   will be removed automatically afterwards.

	   The service is one of the firewalld provided services. To get a
	   list of the supported services, use firewall-cmd --get-services.

	   The --timeout option is not combinable with the --permanent option.

       [--permanent] [--zone=zone] --remove-service=service
	   Remove a service from zone. This option can be specified multiple
	   times. If zone is omitted, default zone will be used.

       [--permanent] [--zone=zone] --query-service=service
	   Return whether service has been added for zone. If zone is omitted,
	   default zone will be used. Returns 0 if true, 1 otherwise.

       [--permanent] [--zone=zone] --list-ports
	   List ports added for zone as a space separated list. A port is of
	   the form portid[-portid]/protocol, it can be either a port and
	   protocol pair or a port range with a protocol. If zone is omitted,
	   default zone will be used.

       [--permanent] [--zone=zone] --add-port=portid[-portid]/protocol
       [--timeout=seconds]
	   Add the port for zone. If zone is omitted, default zone will be
	   used. This option can be specified multiple times. If a timeout is
	   supplied, the rule will be active for the amount of seconds and
	   will be removed automatically afterwards.

	   The port can either be a single port number or a port range
	   portid-portid. The protocol can either be tcp or udp.

	   The --timeout option is not combinable with the --permanent option.

       [--permanent] [--zone=zone] --remove-port=portid[-portid]/protocol
	   Remove the port from zone. If zone is omitted, default zone will be
	   used. This option can be specified multiple times.

       [--permanent] [--zone=zone] --query-port=portid[-portid]/protocol
	   Return whether the port has been added for zone. If zone is
	   omitted, default zone will be used. Returns 0 if true, 1 otherwise.

       [--permanent] [--zone=zone] --list-icmp-blocks
	   List Internet Control Message Protocol (ICMP) type blocks added for
	   zone as a space separated list. If zone is omitted, default zone
	   will be used.

       [--permanent] [--zone=zone] --add-icmp-block=icmptype
       [--timeout=seconds]
	   Add an ICMP block for icmptype for zone. If zone is omitted,
	   default zone will be used. This option can be specified multiple
	   times. If a timeout is supplied, the rule will be active for the
	   amount of seconds and will be removed automatically afterwards.

	   The icmptype is the one of the icmp types firewalld supports. To
	   get a listing of supported icmp types: firewall-cmd --get-icmptypes

	   The --timeout option is not combinable with the --permanent option.

       [--permanent] [--zone=zone] --remove-icmp-block=icmptype
	   Remove the ICMP block for icmptype from zone. If zone is omitted,
	   default zone will be used. This option can be specified multiple
	   times.

       [--permanent] [--zone=zone] --query-icmp-block=icmptype
	   Return whether an ICMP block for icmptype has been added for zone.
	   If zone is omitted, default zone will be used. Returns 0 if true, 1
	   otherwise.

       [--permanent] [--zone=zone] --list-forward-ports
	   List IPv4 forward ports added for zone as a space separated list.
	   If zone is omitted, default zone will be used.

	   For IPv6 forward ports, please use the rich language.

       [--permanent] [--zone=zone]
       --add-forward-port=port=portid[-portid]:proto=protocol[:toport=portid[-portid]][:toaddr=address[/mask]]
       [--timeout=seconds]
	   Add the IPv4 forward port for zone. If zone is omitted, default
	   zone will be used. This option can be specified multiple times. If
	   a timeout is supplied, the rule will be active for the amount of
	   seconds and will be removed automatically afterwards.

	   The port can either be a single port number portid or a port range
	   portid-portid. The protocol can either be tcp or udp. The
	   destination address is a simple IP address.

	   The --timeout option is not combinable with the --permanent option.

	   For IPv6 forward ports, please use the rich language.

       [--permanent] [--zone=zone]
       --remove-forward-port=port=portid[-portid]:proto=protocol[:toport=portid[-portid]][:toaddr=address[/mask]]
	   Remove the IPv4 forward port from zone. If zone is omitted, default
	   zone will be used. This option can be specified multiple times.

	   For IPv6 forward ports, please use the rich language.

       [--permanent] [--zone=zone]
       --query-forward-port=port=portid[-portid]:proto=protocol[:toport=portid[-portid]][:toaddr=address[/mask]]
	   Return whether the IPv4 forward port has been added for zone. If
	   zone is omitted, default zone will be used. Returns 0 if true, 1
	   otherwise.

	   For IPv6 forward ports, please use the rich language.

       [--permanent] [--zone=zone] --add-masquerade [--timeout=seconds]
	   Enable IPv4 masquerade for zone. If zone is omitted, default zone
	   will be used. If a timeout is supplied, masquerading will be active
	   for the amount of seconds. Masquerading is useful if the machine is
	   a router and machines connected over an interface in another zone
	   should be able to use the first connection.

	   The --timeout option is not combinable with the --permanent option.

	   For IPv6 masquerading, please use the rich language.

       [--permanent] [--zone=zone] --remove-masquerade
	   Disable IPv4 masquerade for zone. If zone is omitted, default zone
	   will be used. If the masquerading was enabled with a timeout, it
	   will be disabled also.

	   For IPv6 masquerading, please use the rich language.

       [--permanent] [--zone=zone] --query-masquerade
	   Return whether IPv4 masquerading has been enabled for zone. If zone
	   is omitted, default zone will be used. Returns 0 if true, 1
	   otherwise.

	   For IPv6 masquerading, please use the rich language.

       [--permanent] [--zone=zone] --list-rich-rules
	   List rich language rules added for zone as a newline separated
	   list. If zone is omitted, default zone will be used.

       [--permanent] [--zone=zone] --add-rich-rule='rule' [--timeout=seconds]
	   Add rich language rule 'rule' for zone. This option can be
	   specified multiple times. If zone is omitted, default zone will be
	   used. If a timeout is supplied, the rule will be active for the
	   amount of seconds and will be removed automatically afterwards.

	   For the rich language rule syntax, please have a look at
	   firewalld.richlanguage(5).

	   The --timeout option is not combinable with the --permanent option.

       [--permanent] [--zone=zone] --remove-rich-rule='rule'
	   Remove rich language rule 'rule' from zone. This option can be
	   specified multiple times. If zone is omitted, default zone will be
	   used.

	   For the rich language rule syntax, please have a look at
	   firewalld.richlanguage(5).

       [--permanent] [--zone=zone] --query-rich-rule='rule'
	   Return whether a rich language rule 'rule' has been added for zone.
	   If zone is omitted, default zone will be used. Returns 0 if true, 1
	   otherwise.

	   For the rich language rule syntax, please have a look at
	   firewalld.richlanguage(5).

   Options to Handle Bindings of Interfaces
       Binding an interface to a zone means that this zone settings are used
       to restrict traffic via the interface.

       Options in this section affect only one particular zone. If used with
       --zone=zone option, they affect the zone zone. If the option is
       omitted, they affect default zone (see --get-default-zone).

       For a list of predefined zones use firewall-cmd --get-zones.

       An interface name is a string up to 16 characters long, that may not
       contain ' ', '/', '!' and '*'.

       [--permanent] [--zone=zone] --list-interfaces
	   List interfaces that are bound to zone zone as a space separated
	   list. If zone is omitted, default zone will be used.

       [--permanent] [--zone=zone] --add-interface=interface
	   Bind interface interface to zone zone. If zone is omitted, default
	   zone will be used.

       [--zone=zone] --change-interface=interface
	   Change zone the interface interface is bound to to zone zone. If
	   zone is omitted, default zone will be used. If old and new zone are
	   the same, the call will be ignored without an error. If the
	   interface has not been bound to a zone before, it will behave like
	   --add-interface.

       [--permanent] [--zone=zone] --query-interface=interface
	   Query whether interface interface is bound to zone zone. Returns 0
	   if true, 1 otherwise.

       [--permanent] [--zone=zone] --remove-interface=interface
	   Remove binding of interface interface from zone zone. If zone is
	   omitted, default zone will be used.

   Options to Handle Bindings of Sources
       Binding a source to a zone means that this zone settings will be used
       to restrict traffic from this source.

       A source address or address range is either an IP address or a network
       IP address with a mask for IPv4 or IPv6. For IPv4, the mask can be a
       network mask or a plain number. For IPv6 the mask is a plain number.
       The use of host names is not supported.

       Options in this section affect only one particular zone. If used with
       --zone=zone option, they affect the zone zone. If the option is
       omitted, they affect default zone (see --get-default-zone).

       For a list of predefined zones use firewall-cmd [--permanent]
       --get-zones.

       [--permanent] [--zone=zone] --list-sources
	   List sources that are bound to zone zone as a space separated list.
	   If zone is omitted, default zone will be used.

       [--permanent] [--zone=zone] --add-source=source[/mask]
	   Bind source source[/mask] to zone zone. If zone is omitted, default
	   zone will be used.

       [--zone=zone] --change-source=source[/mask]
	   Change zone the source source[/mask] is bound to to zone zone. If
	   zone is omitted, default zone will be used. If old and new zone are
	   the same, the call will be ignored without an error. If the source
	   has not been bound to a zone before, it will behave like
	   --add-source.

       [--permanent] [--zone=zone] --query-source=source[/mask]
	   Query whether the source source[/mask] is bound to the zone zone.
	   Returns 0 if true, 1 otherwise.

       [--permanent] [--zone=zone] --remove-source=source[/mask]
	   Remove binding of source source[/mask] from zone zone. If zone is
	   omitted, default zone will be used.

   Service Options
       --permanent --new-service=service
	   Add a new permanent service.

       --permanent --delete-service=service
	   Delete an existing permanent service.

   Internet Control Message Protocol (ICMP) type Options
       --permanent --new-icmptype=icmptype
	   Add a new permanent icmptype.

       --permanent --delete-icmptype=icmptype
	   Delete an existing permanent icmptype.

   Direct Options
       The direct options give a more direct access to the firewall. These
       options require user to know basic iptables concepts, i.e.  table
       (filter/mangle/nat/...), chain (INPUT/OUTPUT/FORWARD/...), commands
       (-A/-D/-I/...), parameters (-p/-s/-d/-j/...) and targets
       (ACCEPT/DROP/REJECT/...).

       Direct options should be used only as a last resort when it's not
       possible to use for example --add-service=service or
       --add-rich-rule='rule'.

       The first argument of each option has to be ipv4 or ipv6 or eb. With
       ipv4 it will be for IPv4 (iptables(8)), with ipv6 for IPv6
       (ip6tables(8)) and with eb for ethernet bridges (ebtables(8)).

       [--permanent] --direct --get-all-chains
	   Get all chains added to all tables.

	   This option concerns only chains previously added with --direct
	   --add-chain.

       [--permanent] --direct --get-chains { ipv4 | ipv6 | eb } table
	   Get all chains added to table table as a space separated list.

	   This option concerns only chains previously added with --direct
	   --add-chain.

       [--permanent] --direct --add-chain { ipv4 | ipv6 | eb } table chain
	   Add a new chain with name chain to table table.

	   There already exist basic chains to use with direct options, for
	   example INPUT_direct chain (see iptables-save | grep direct output
	   for all of them). These chains are jumped into before chains for
	   zones, i.e. every rule put into INPUT_direct will be checked before
	   rules in zones.

       [--permanent] --direct --remove-chain { ipv4 | ipv6 | eb } table chain
	   Remove the chain with name chain from table table.

       [--permanent] --direct --query-chain { ipv4 | ipv6 | eb } table chain
	   Return whether a chain with name chain exists in table table.
	   Returns 0 if true, 1 otherwise.

	   This option concerns only chains previously added with --direct
	   --add-chain.

       [--permanent] --direct --get-all-rules
	   Get all rules added to all chains in all tables as a newline
	   separated list of the priority and arguments.

       [--permanent] --direct --get-rules { ipv4 | ipv6 | eb } table chain
	   Get all rules added to chain chain in table table as a newline
	   separated list of the priority and arguments.

       [--permanent] --direct --add-rule { ipv4 | ipv6 | eb } table chain
       priority args
	   Add a rule with the arguments args to chain chain in table table
	   with priority priority.

	   The priority is used to order rules. Priority 0 means add rule on
	   top of the chain, with a higher priority the rule will be added
	   further down. Rules with the same priority are on the same level
	   and the order of these rules is not fixed and may change. If you
	   want to make sure that a rule will be added after another one, use
	   a low priority for the first and a higher for the following.

       [--permanent] --direct --remove-rule { ipv4 | ipv6 | eb } table chain
       priority args
	   Remove a rule with priority and the arguments args from chain chain
	   in table table.

       [--permanent] --direct --remove-rules { ipv4 | ipv6 | eb } table chain
	   Remove all rules in the chain with name chain exists in table
	   table.

	   This option concerns only rules previously added with --direct
	   --add-rule in this chain.

       [--permanent] --direct --query-rule { ipv4 | ipv6 | eb } table chain
       priority args
	   Return whether a rule with priority and the arguments args exists
	   in chain chain in table table. Returns 0 if true, 1 otherwise.

       --direct --passthrough { ipv4 | ipv6 | eb } args
	   Pass a command through to the firewall.  args can be all iptables,
	   ip6tables and ebtables command line arguments.

       --permanent --direct --get-all-passthroughs
	   Get all permanent passthrough as a newline separated list of the
	   ipv value and arguments.

       --permanent --direct --get-passthroughs { ipv4 | ipv6 | eb }
	   Get all permanent passthrough rules for the ipv value as a newline
	   separated list of the priority and arguments.

       --permanent --direct --add-passthrough { ipv4 | ipv6 | eb } args
	   Add a permanent passthrough rule with the arguments args for the
	   ipv value.

       --permanent --direct --remove-passthrough { ipv4 | ipv6 | eb } args
	   Remove a permanent passthrough rule with the arguments args for the
	   ipv value.

       --permanent --direct --query-passthrough { ipv4 | ipv6 | eb } args
	   Return whether a permanent passthrough rule with the arguments args
	   exists for the ipv value. Returns 0 if true, 1 otherwise.

   Lockdown Options
       Local applications or services are able to change the firewall
       configuration if they are running as root (example: libvirt) or are
       authenticated using PolicyKit. With this feature administrators can
       lock the firewall configuration so that only applications on lockdown
       whitelist are able to request firewall changes.

       The lockdown access check limits D-Bus methods that are changing
       firewall rules. Query, list and get methods are not limited.

       The lockdown feature is a very light version of user and application
       policies for firewalld and is turned off by default.

       --lockdown-on
	   Enable lockdown. Be careful - if firewall-cmd is not on lockdown
	   whitelist when you enable lockdown you won't be able to disable it
	   again with firewall-cmd, you would need to edit firewalld.conf.

	   This is a runtime and permanent change.

       --lockdown-off
	   Disable lockdown.

	   This is a runtime and permanent change.

       --query-lockdown
	   Query whether lockdown is enabled. Returns 0 if lockdown is
	   enabled, 1 otherwise.

   Lockdown Whitelist Options
       The lockdown whitelist can contain commands, contexts, users and user
       ids.

       If a command entry on the whitelist ends with an asterisk '*', then all
       command lines starting with the command will match. If the '*' is not
       there the absolute command inclusive arguments must match.

       Commands for user root and others is not always the same. Example: As
       root /bin/firewall-cmd is used, as a normal user /usr/bin/firewall-cmd
       is be used on Fedora.

       The context is the security (SELinux) context of a running application
       or service. To get the context of a running application use ps -e
       --context.

       Warning: If the context is unconfined, then this will open access for
       more than the desired application.

       The lockdown whitelist entries are checked in the following order:
	   1. context
	   2. uid
	   3. user
	   4. command

       [--permanent] --list-lockdown-whitelist-commands
	   List all command lines that are on the whitelist.

       [--permanent] --add-lockdown-whitelist-command=command
	   Add the command to the whitelist.

       [--permanent] --remove-lockdown-whitelist-command=command
	   Remove the command from the whitelist.

       [--permanent] --query-lockdown-whitelist-command=command
	   Query whether the command is on the whitelist. Returns 0 if true, 1
	   otherwise.

       [--permanent] --list-lockdown-whitelist-contexts
	   List all contexts that are on the whitelist.

       [--permanent] --add-lockdown-whitelist-context=context
	   Add the context context to the whitelist.

       [--permanent] --remove-lockdown-whitelist-context=context
	   Remove the context from the whitelist.

       [--permanent] --query-lockdown-whitelist-context=context
	   Query whether the context is on the whitelist. Returns 0 if true, 1
	   otherwise.

       [--permanent] --list-lockdown-whitelist-uids
	   List all user ids that are on the whitelist.

       [--permanent] --add-lockdown-whitelist-uid=uid
	   Add the user id uid to the whitelist.

       [--permanent] --remove-lockdown-whitelist-uid=uid
	   Remove the user id uid from the whitelist.

       [--permanent] --query-lockdown-whitelist-uid=uid
	   Query whether the user id uid is on the whitelist. Returns 0 if
	   true, 1 otherwise.

       [--permanent] --list-lockdown-whitelist-users
	   List all user names that are on the whitelist.

       [--permanent] --add-lockdown-whitelist-user=user
	   Add the user name user to the whitelist.

       [--permanent] --remove-lockdown-whitelist-user=user
	   Remove the user name user from the whitelist.

       [--permanent] --query-lockdown-whitelist-user=user
	   Query whether the user name user is on the whitelist. Returns 0 if
	   true, 1 otherwise.

   Panic Options
       --panic-on
	   Enable panic mode. All incoming and outgoing packets are dropped,
	   active connections will expire. Enable this only if there are
	   serious problems with your network environment. For example if the
	   machine is getting hacked in.

	   This is a runtime only change.

       --panic-off
	   Disable panic mode. After disabling panic mode established
	   connections might work again, if panic mode was enabled for a short
	   period of time.

	   This is a runtime only change.

       --query-panic
	   Returns 0 if panic mode is enabled, 1 otherwise.

EXAMPLES
       For more examples see http://fedoraproject.org/wiki/FirewallD

   Example 1
       Enable http service in default zone. This is runtime only change, i.e.
       effective until restart.

	   firewall-cmd --add-service=http

   Example 2
       Enable port 443/tcp immediately and permanently in default zone. To
       make the change effective immediately and also after restart we need
       two commands. The first command makes the change in runtime
       configuration, i.e. makes it effective immediately, until restart. The
       second command makes the change in permanent configuration, i.e. makes
       it effective after restart.

	   firewall-cmd --add-port=443/tcp
	   firewall-cmd --permanent --add-port=443/tcp

EXIT CODES
       On success 0 is returned. On failure the output is red colored and exit
       code is either 2 in case of wrong command-line option usage or one of
       the following error codes in other cases:

       ┌────────────────────┬──────┐
       │String		    │ Code │
       ├────────────────────┼──────┤
       │ALREADY_ENABLED	    │	11 │
       ├────────────────────┼──────┤
       │NOT_ENABLED	    │	12 │
       ├────────────────────┼──────┤
       │COMMAND_FAILED	    │	13 │
       ├────────────────────┼──────┤
       │NO_IPV6_NAT	    │	14 │
       ├────────────────────┼──────┤
       │PANIC_MODE	    │	15 │
       ├────────────────────┼──────┤
       │ZONE_ALREADY_SET    │	16 │
       ├────────────────────┼──────┤
       │UNKNOWN_INTERFACE   │	17 │
       ├────────────────────┼──────┤
       │ZONE_CONFLICT	    │	18 │
       ├────────────────────┼──────┤
       │BUILTIN_CHAIN	    │	19 │
       ├────────────────────┼──────┤
       │EBTABLES_NO_REJECT  │	20 │
       ├────────────────────┼──────┤
       │NOT_OVERLOADABLE    │	21 │
       ├────────────────────┼──────┤
       │NO_DEFAULTS	    │	22 │
       ├────────────────────┼──────┤
       │BUILTIN_ZONE	    │	23 │
       ├────────────────────┼──────┤
       │BUILTIN_SERVICE	    │	24 │
       ├────────────────────┼──────┤
       │BUILTIN_ICMPTYPE    │	25 │
       ├────────────────────┼──────┤
       │NAME_CONFLICT	    │	26 │
       ├────────────────────┼──────┤
       │NAME_MISMATCH	    │	27 │
       ├────────────────────┼──────┤
       │PARSE_ERROR	    │	28 │
       ├────────────────────┼──────┤
       │ACCESS_DENIED	    │	29 │
       ├────────────────────┼──────┤
       │UNKNOWN_SOURCE	    │	30 │
       ├────────────────────┼──────┤
       │INVALID_ACTION	    │  100 │
       ├────────────────────┼──────┤
       │INVALID_SERVICE	    │  101 │
       ├────────────────────┼──────┤
       │INVALID_PORT	    │  102 │
       ├────────────────────┼──────┤
       │INVALID_PROTOCOL    │  103 │
       ├────────────────────┼──────┤
       │INVALID_INTERFACE   │  104 │
       ├────────────────────┼──────┤
       │INVALID_ADDR	    │  105 │
       ├────────────────────┼──────┤
       │INVALID_FORWARD	    │  106 │
       ├────────────────────┼──────┤
       │INVALID_ICMPTYPE    │  107 │
       ├────────────────────┼──────┤
       │INVALID_TABLE	    │  108 │
       ├────────────────────┼──────┤
       │INVALID_CHAIN	    │  109 │
       ├────────────────────┼──────┤
       │INVALID_TARGET	    │  110 │
       ├────────────────────┼──────┤
       │INVALID_IPV	    │  111 │
       ├────────────────────┼──────┤
       │INVALID_ZONE	    │  112 │
       ├────────────────────┼──────┤
       │INVALID_PROPERTY    │  113 │
       ├────────────────────┼──────┤
       │INVALID_VALUE	    │  114 │
       ├────────────────────┼──────┤
       │INVALID_OBJECT	    │  115 │
       ├────────────────────┼──────┤
       │INVALID_NAME	    │  116 │
       ├────────────────────┼──────┤
       │INVALID_FILENAME    │  117 │
       ├────────────────────┼──────┤
       │INVALID_DIRECTORY   │  118 │
       ├────────────────────┼──────┤
       │INVALID_TYPE	    │  119 │
       ├────────────────────┼──────┤
       │INVALID_SETTING	    │  120 │
       ├────────────────────┼──────┤
       │INVALID_DESTINATION │  121 │
       ├────────────────────┼──────┤
       │INVALID_RULE	    │  122 │
       ├────────────────────┼──────┤
       │INVALID_LIMIT	    │  123 │
       ├────────────────────┼──────┤
       │INVALID_FAMILY	    │  124 │
       ├────────────────────┼──────┤
       │INVALID_LOG_LEVEL   │  125 │
       ├────────────────────┼──────┤
       │INVALID_AUDIT_TYPE  │  126 │
       ├────────────────────┼──────┤
       │INVALID_MARK	    │  127 │
       ├────────────────────┼──────┤
       │INVALID_CONTEXT	    │  128 │
       ├────────────────────┼──────┤
       │INVALID_COMMAND	    │  129 │
       ├────────────────────┼──────┤
       │INVALID_USER	    │  130 │
       ├────────────────────┼──────┤
       │INVALID_UID	    │  131 │
       ├────────────────────┼──────┤
       │MISSING_TABLE	    │  200 │
       ├────────────────────┼──────┤
       │MISSING_CHAIN	    │  201 │
       ├────────────────────┼──────┤
       │MISSING_PORT	    │  202 │
       ├────────────────────┼──────┤
       │MISSING_PROTOCOL    │  203 │
       ├────────────────────┼──────┤
       │MISSING_ADDR	    │  204 │
       ├────────────────────┼──────┤
       │MISSING_NAME	    │  205 │
       ├────────────────────┼──────┤
       │MISSING_SETTING	    │  206 │
       ├────────────────────┼──────┤
       │MISSING_FAMILY	    │  207 │
       ├────────────────────┼──────┤
       │NOT_RUNNING	    │  252 │
       ├────────────────────┼──────┤
       │NOT_AUTHORIZED	    │  253 │
       ├────────────────────┼──────┤
       │UNKNOWN_ERROR	    │  254 │
       └────────────────────┴──────┘

SEE ALSO
       firewall-applet(1), firewalld(1), firewall-cmd(1), firewall-config(1),
       firewalld.conf(5), firewalld.direct(5), firewalld.icmptype(5),
       firewalld.lockdown-whitelist(5), firewall-offline-cmd(1),
       firewalld.richlanguage(5), firewalld.service(5), firewalld.zone(5),
       firewalld.zones(5)

NOTES
       firewalld home page at fedorahosted.org:
	   https://fedorahosted.org/firewalld/

       More documentation with examples:
	   http://fedoraproject.org/wiki/FirewallD

AUTHORS
       Thomas Woerner <twoerner@redhat.com>
	   Developer

       Jiri Popelka <jpopelka@redhat.com>
	   Developer

firewalld 0.3.10					       FIREWALL-CMD(1)
[top]

List of man pages available for OpenMandriva

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net