foo2hiperc man page on ElementaryOS

Man page or keyword search:  
man Server   4994 pages
apropos Keyword Search (all sections)
Output format
ElementaryOS logo
[printable version]

foo2hiperc(1)							 foo2hiperc(1)

NAME
       foo2hiperc - Convert Ghostscript pbmraw or bitcmyk format into a HIPERC
       printer stream

SYNOPSIS
       foo2hiperc [options] <pbmraw-file >hiperc-file

       foo2hiperc [options] <bitcmyk-file >hiperc-file

       foo2hiperc [options] <pksmraw-file >hiperc-file

DESCRIPTION
       foo2hiperc converts Ghostscript pbmraw, bitcmyk, or pksmraw output for‐
       mats to monochrome or color HIPERC streams, for driving the Oki C310dn,
       C3100, C3200, C3300n, C3400n, C5100n, C5500n, C5600n,  and  the	C5800n
       HIPERC printers.

COMMAND LINE OPTIONS
   Normal Options
       These are the options used to select the parameters of a print job that
       are usually controlled on a per job basis.

       -c     Force color mode if autodetect doesn't work.

       -d duplex
	      Duplex code to send to printer [1].
	      │	       │	       │
	      │1   off │ 2   long edge │ 3   short edge

       -g xpixxypix
	      Set page dimensions in pixels [5100x6600].

       -m media
	      Media code to send to printer [0].

	      ──────────────────────────
	      Media	     HIPERC
	      ──────────────────────────
	      plain	       0
	      labels	       1
	      transparency     2

       -p paper
	      Paper code to send to printer [2].

	      ┌─────────────┬─────────────────────┐
	      │ 1   A4	    │  2   letter	  │
	      │ 3   legal   │ -	   -		  │
	      │ 5   A5	    │  6   B5jis	  │
	      │ 7   A6	    │  8   env Monarch	  │
	      │ 9   env DL  │ 10   env C5	  │
	      │11   env #10 │ 12   executive	  │
	      │13   env #9  │ 14   legal 13.5"	  │
	      │15   A3	    │ 16   tabloid/ledger │
	      └─────────────┴─────────────────────┘
       -n copies
	      Number of copies [1].

       -r xresxyres
	      Set device resolution in pixels/inch [600x600].

       -s source
	      Source (InputSlot) code to send to printer [0].
	      │		       │
	      │0   auto select │
	      │1   tray1       │ 2   tray2
	      │3   multi       │ 4   manual

       -t     Draft mode.  Every other pixel is white.

       -J filename
	      Filename string to send to printer.

       -U username
	      Username string to send to printer.

   Printer Tweaking Options
       These are the options used to customize the operation of foo2hiperc for
       a particular printer.

       -u xoffxyoff
	      Set  the	offset	of  the start of the printable region from the
	      upper left corner, in pixels [0x0].

       -l xoffxyoff
	      Set the offset of the end of the printable region from the lower
	      right corner, in pixels [0x0].

       -L mask
	      Send  logical  clipping  amounts	implied by -u/-l in the HIPERC
	      stream [3].

	      0	  don't send any logical clipping amounts
	      1	  only send Y clipping amount
	      2	  only send X clipping amount
	      3	  send both X and Y clipping amounts

       -A     AllIsBlack: convert C=1,M=1,Y=1 to just K=1.  Works with bitcmyk
	      input only.

       -B     BlackClears:  K=1	 forces	 C,M,Y to 0.  Works with bitcmyk input
	      only.

       -Z compressed
	      Use uncompressed (0) or compressed (1) JBIG data.

   Debugging Options
       These options are used for debugging foo2hiperc.

       -S plane
	      Output just a single color plane from a color print and print it
	      on the black plane.  The default is to output all color planes.

	      1	  Cyan
	      2	  Magenta
	      3	  Yellow
	      4	  Black

       -D level
	      Set Debug level [0].

EXAMPLES
       Create a black and white HIPERC stream:

	      gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE
		  -sPAPERSIZE=letter -r600x600 -sDEVICE=pbmraw
		  -sOutputFile=- - < testpage.ps
	      | foo2hiperc -r600x600 -g5100x6600 -p0 >testpage.zm

       Create a color HIPERC stream:

	      gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE
		  -sPAPERSIZE=letter -g5100x6600 -r600x600 -sDEVICE=bitcmyk
		  -sOutputFile=- - < testpage.ps
	      | foo2hiperc -r600x600 -g5100x6600 -p0 >testpage.zc

FILES
       /usr/bin/foo2hiperc

SEE ALSO
       foo2hiperc-wrapper(1), hipercdecode(1)

AUTHOR
       Rick Richardson <rick.richardson@comcast.com>
       http://foo2hiperc.rkkda.com/

[top]

List of man pages available for ElementaryOS

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
...................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net