foo2hp man page on Mandriva

Man page or keyword search:  
man Server   17060 pages
apropos Keyword Search (all sections)
Output format
Mandriva logo
[printable version]

foo2hp(1)							     foo2hp(1)

NAME
       foo2hp  -  Convert  Ghostscript	pbmraw	or  bitcmyk  format into a ZJS
       printer stream

SYNOPSIS
       foo2hp [options] <pbmraw-file >zjs-file

       foo2hp [options] <bitcmyk-file >zjs-file

       foo2hp [options] <cups-file >zjs-file

DESCRIPTION
       foo2hp converts Ghostscript pbmraw, bitcmyk, or cups output formats  to
       monochrome  or color ZJS streams, for driving the Hewlett-Packard 2600n
       color laser printer and other Zenographics-based printers.

COMMAND LINE OPTIONS
   Normal Options
       These are the options used to select the parameters of a print job that
       are usually controlled on a per job basis.

       -b bits
	      Bits per plane if autodetect doesn't work (1 or 2) [1].

       -c     Force color mode if autodetect doesn't work.

       -d duplex
	      Duplex code to send to printer [1].
	      │	       │	       │
	      │1   off │ 2   long edge │ 3   short edge

       -g xpixxypix
	      Set page dimensions in pixels [10200x6600].

       -m media
	      Media code to send to printer [1].

	      ──────────────────────────
	      Media	     HPLJ 2600n
	      ──────────────────────────
	      plain		  1
	      preprinted	514
	      letterhead	513
	      transparency	  2
	      prepunched	515
	      labels		265
	      bond		260
	      recycled		516
	      color		512
	      tough		276
	      envelope		267
	      light		258
	      heavy		262
	      cardstock		261
	      lightglossy	268
	      glossy		269
	      heavyglossy	270
	      cover		277

	      photo		278

       -p paper
	      Paper code to send to printer [1].

	      ┌─────────────────┬─────────────┐
	      │ 1   letter	│  9   A4     │
	      │ 5   legal	│ 11   A5     │
	      │ 7   executive	│ 13   B5jis  │
	      │20   env #10	│ 27   env DL │
	      │28   env C5	│ 34   env B5 │
	      │37   env Monarch │	      │
	      └─────────────────┴─────────────┘
       -n copies
	      Number of copies [1].

       -r xresxyres
	      Set device resolution in pixels/inch [600x600].

       -s source
	      Source (InputSlot) code to send to printer [7].
	      │		  │
	      │1   tray 2 │ 7	auto
	      │2   tray 1 │

       -t     Draft mode.  Every other pixel is white.

       -J filename
	      Filename string to send to printer.

       -U username
	      Username string to send to printer.

   Printer Tweaking Options
       These  are  the options used to customize the operation of foo2hp for a
       particular printer.

       -u xoffxyoff
	      Set the offset of the start of the  printable  region  from  the
	      upper left corner, in pixels [0x0].

       -l xoffxyoff
	      Set the offset of the end of the printable region from the lower
	      right corner, in pixels [0x0].

       -L mask
	      Send logical clipping amounts implied by -u/-l in	 the  ZjStream
	      [3].

	      0	  don't send any logical clipping amounts
	      1	  only send Y clipping amount
	      2	  only send X clipping amount
	      3	  send both X and Y clipping amounts

       -O c,m,y,k
	      Alignment of CMYK in rows. The default is 0,0,0,0.

       -P     Do  not  send  START_PLANE  codes	 on monochrome output.	May be
	      needed by some black and white only printers,  such  as  the  HP
	      LaserJet 1000.

       -A     AllIsBlack: convert C=1,M=1,Y=1 to just K=1.  Works with bitcmyk
	      input only.

       -B     BlackClears: K=1 forces C,M,Y to 0.  Works  with	bitcmyk	 input
	      only.

       -X padlen
	      Add  extra zero padding to the end of BID segments.  The default
	      is 16 bytes.

   Debugging Options
       These options are used for debugging foo2hp.

       -S plane
	      Output just a single color plane from a color print and print it
	      on the black plane.  The default is to output all color planes.

	      1	  Cyan
	      2	  Magenta
	      3	  Yellow
	      4	  Black

       -D level
	      Set Debug level [0].

EXAMPLES
       Create a black and white ZJS stream:

	      gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE
		  -sPAPERSIZE=letter -r600x600 -sDEVICE=pbmraw
		  -sOutputFile=- - < testpage.ps
	      | foo2hp -r600x600 -g5100x6600 -p1 >testpage.zm

       Create a color ZJS stream:

	      gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE
		  -sPAPERSIZE=letter -g5100x6600 -r600x600 -sDEVICE=bitcmyk
		  -sOutputFile=- - < testpage.ps
	      | foo2hp -r600x600 -g5100x6600 -p1 >testpage.zc

FILES
       /usr/bin/foo2hp

SEE ALSO
       foo2hp2600-wrapper(1), zjsdecode(1)

AUTHOR
       Rick Richardson <rick.richardson@comcast.net>
       http://foo2hp.rkkda.com/

[top]

List of man pages available for Mandriva

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net