hostname man page on Mandriva

Man page or keyword search:  
man Server   17060 pages
apropos Keyword Search (all sections)
Output format
Mandriva logo
[printable version]

HOSTNAME(1)		   Linux Programmer's Manual		   HOSTNAME(1)

NAME
       hostname - show or set the system's host name
       domainname - show or set the system's NIS/YP domain name
       dnsdomainname - show the system's DNS domain name
       nisdomainname - show or set system's NIS/YP domain name
       ypdomainname - show or set the system's NIS/YP domain name

SYNOPSIS
       hostname	 [-v] [-a] [--alias] [-d] [--domain] [-f] [--fqdn] [-i] [--ip-
       address] [--long] [-s] [--short] [-y] [--yp] [--nis]

       hostname [-v] [-F filename] [--file filename] [hostname]

       domainname [-v] [-F filename] [--file filename] [name]

       nodename [-v] [-F filename] [--file filename] [name]

       hostname [-v] [-h] [--help] [-V] [--version]

       dnsdomainname [-v]
       nisdomainname [-v]
       ypdomainname [-v]

DESCRIPTION
       Hostname is the program that is used to either set or display the  cur‐
       rent  host, domain or node name of the system.  These names are used by
       many of the networking programs to identify  the	 machine.  The	domain
       name is also used by NIS/YP.

   GET NAME
       When  called  without  any  arguments, the program displays the current
       names:

       hostname will print the name of the system as returned by the  gethost‐
       name(2) function.

       domainname, nisdomainname, ypdomainname will print the name of the sys‐
       tem as returned by the getdomainname(2) function. This is also known as
       the YP/NIS domain name of the system.

       dnsdomainname  will  print the domain part of the FQDN (Fully Qualified
       Domain Name). The complete FQDN of the system is returned with hostname
       --fqdn.

       The  function  gethostname(2)  is  used	to get the hostname.  When the
       hostname -a, -d, -f or -i is called will	 gethostbyname(3)  be  called.
       The  difference in gethostname(2) and gethostbyname(3) is that gethost‐
       byname(3) is network  aware,  so	 it  consults  /etc/nsswitch.conf  and
       /etc/host.conf  to  decide  whether to read information in /etc/syscon‐
       fig/network or /etc/hosts

       To add another dimension to this, the hostname is  also	set  when  the
       network interface is brought up.

   SET NAME
       When  called  with one argument or with the --file option, the commands
       set the host name, the NIS/YP domain name or the node name.

       Note, that only the super-user can change the names.

       It is not possible to set the FQDN or the DNS domain name with the dns‐
       domainname command (see THE FQDN below).

       The   host   name   is	usually	  set	once   at  system  startup  in
       /etc/rc.d/rc.inet1 or /etc/init.d/boot (normally by  reading  the  con‐
       tents of a file which contains the host name, e.g.  /etc/hostname).

   THE FQDN
       You  can't  change the FQDN (as returned by hostname --fqdn) or the DNS
       domain name (as returned by dnsdomainname) with this command. The  FQDN
       of  the	system	is  the name that the resolver(3) returns for the host
       name.

       Technically: The FQDN is the name gethostbyname(2) returns for the host
       name returned by gethostname(2).	 The DNS domain name is the part after
       the first dot.

       Therefore it depends on the configuration (usually  in  /etc/host.conf)
       how  you can change it. Usually (if the hosts file is parsed before DNS
       or NIS) you can change it in /etc/hosts.

OPTIONS
       -a, --alias
	      Display the alias name of the host (if used).

       -d, --domain
	      Display the name of  the	DNS  domain.  Don't  use  the  command
	      domainname  to  get the DNS domain name because it will show the
	      NIS domain name and not the DNS domain name.  Use	 dnsdomainname
	      instead.

       -F, --file filename
	      Read  the	 host  name  from  the specified file. Comments (lines
	      starting with a `#') are ignored.

       -f, --fqdn, --long
	      Display the FQDN (Fully Qualified Domain Name). A FQDN  consists
	      of  a  short  host  name and the DNS domain name. Unless you are
	      using bind or NIS for host lookups you can change the  FQDN  and
	      the  DNS	domain	name  (which  is  part	of  the	 FQDN)	in the
	      /etc/hosts file.

       -h, --help
	      Print a usage message and exit.

       -i, --ip-address
	      Display the IP address(es) of the host.

       -s, --short
	      Display the short host name. This is the host name  cut  at  the
	      first dot.

       -V, --version
	      Print  version  information on standard output and exit success‐
	      fully.

       -v, --verbose
	      Be verbose and tell what's going on.

       -y, --yp, --nis
	      Display the NIS domain name. If a parameter is given (or	--file
	      name ) then root can also set a new NIS domain.

FILES
       /etc/hosts /etc/sysconfig/network

NOTE
       Note  that  hostname  doesn't change anything permanently. After reboot
       original names from /etc/hosts are used again.

AUTHOR
       Peter Tobias, <tobias@et-inf.fho-emden.de>
       Bernd Eckenfels, <net-tools@lina.inka.de> (NIS and manpage).
       Steve Whitehouse, <SteveW@ACM.org> (DECnet support and manpage).

net-tools			  28 Jan 1996			   HOSTNAME(1)
[top]

List of man pages available for Mandriva

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net