IODINE-CLIENT-START(8) System Administration Utilities IODINE-CLIENT-START(8)NAMEiodine-client-start - start an iodine IPv4-over-DNS tunnel
SYNOPSISiodine-client-start [option]
DESCRIPTION
'iodine-client-start' starts an iodine IP-over-DNS tunnel.
-h, --help
Print help and exit
-v, --version
Print version info and exit
Invoking the program without options attempts to set up and configure
an iodine IP-over-DNS tunnel using the configuration in the file
/etc/default/iodine-client or by querying the user. It tries to figure
out the right way to set things up by observing the network, and if all
else fails by guessing.
QUICK CONFIGURATION
Put two lines in the file /etc/default/iodine-client
subdomain=your.tunnel.sub.domain
passwd=password_for_that_tunnel
or invoke the script with those environment variables set:
env subdomain=xxx passwd=xxx iodine-client-start
If these are not set, the script will query the user for them.
DETAILS
The configuration file consists of lines which are either comments
starting with '#', or settings of the form VAR="val". Valid VARs are:
subdomain
Sample value: your.tunnel.sub.domain (no default, must be set)
passwd
Sample value: password_for_that_tunnel (no default, must be set)
testhost
Hostname to ping when testing if network is working (default:
slashdot.org)
bounce_localnet
Take the local network down and then up again before starting
tunnel (default: false)
test_ping_localnet
Test if the local network is working by pinging the gateway
(default: true)
test_ping_tunnel
Test if the iodine tunnel is working after it has been set up by
pinging the host at the other end (default: true)
test_ping_final
Test if the tunnel is working after everything is ostensibly set
up by trying to ping an external host (default: true)
default_router
IP address of router on the local network---should be found
automatically, set this if that fails and the program guesses
wrong.
interface
Interface to use (e.g., eth1, eth0, etc) for connection to DNS
server used for the iodine tunnel---should be found automati‐
cally, set this if that fails and the program guesses wrong.
mtu
Set if tunnel MTU needs to be manually changed (lowered). Should
not be necessary anymore, as recent versions of iodine negotiate
an appropriate MTU during tunnel setup. But if that negotiation
does not happen, or if you are using an older version of iodine,
the default tunnel MTU is 1024, and if the local DNS server
restricts to 512 byte packets you might need to use an MTU of
220.
skip_raw_udp_mode
Set "-r" option in iodine command line. With this option, iodine
does not try to establish a direct UDP socket to the iodine
server on port 53. (default: true).
continue_on_error
Set if the script should continue even if a command fails. Use
to test script when running as non-root. Defaults to false if
running as root, true otherwise.
iodine-client-start 1.0.5 January 2017 IODINE-CLIENT-START(8)
