Man page or keyword search:   man All Sections 1 - General Commands 2 - System Calls 3 - Subroutines, Functions 4 - Special Files 5 - File Formats 6 - Games and Screensavers 7 - Macros and Conventions 8 - Maintenence Commands 9 - Kernel Interface New Commands Server 4.4BSD AIX Alpinelinux Archlinux Aros BSDOS BSDi Bifrost CentOS Cygwin Darwin Debian DigitalUNIX DragonFly ElementaryOS Fedora FreeBSD Gentoo GhostBSD HP-UX Haiku Hurd IRIX Inferno JazzOS Kali Knoppix LinuxMint MacOSX Mageia Mandriva Manjaro Minix MirBSD NeXTSTEP NetBSD OPENSTEP OSF1 OpenBSD OpenDarwin OpenIndiana OpenMandriva OpenServer OpenSuSE OpenVMS Oracle PC-BSD Peanut Pidora Plan9 QNX Raspbian RedHat Scientific Slackware SmartOS Solaris SuSE SunOS Syllable Tru64 UNIXv7 Ubuntu Ultrix UnixWare Xenix YellowDog aLinux   9087 pages apropos Keyword Search (all sections) Output format html ascii pdf view pdf save postscript

JME(4)			 BSD Kernel Interfaces Manual			JME(4)

NAME
     jme — JMicron Technologies JMC250 Gigabit Ethernet and JMC260 Fast Ether‐
     net controller driver

SYNOPSIS
     jme* at pci? dev ? function ?

     Configuration of PHYs is necessary.  See mii(4).

DESCRIPTION
     The jme device driver supports network adapters based on the JMicron
     Technologies JMC250 Gigabit Ethernet and JMC260 Fast Ethernet chips.  The
     following features are supported:

	   IPv4 transmit/receive IP/TCP/UDP checksum offload
	   IPv6 transmit TCP/UDP checksum offload
	   IPv4 and IPv6 TCP segmentation offload
	   VLAN tag insertion/removal
	   Interrupt coalescing
	   10/100/1000Mbps operation in full-duplex mode
	   10/100Mbps operation in half-duplex mode
	   Jumbo frames (up to 9022 bytes)

     Due to hardware limitation checksums and TCP segmentation offload can't
     be enabled if the configured MTU is larger than 4000 bytes.

     Interrupt coalescing can be controlled on a per-adapter basis through the
     following sysctls:

     hw.jme.jme<x>.int_rxtos  jme receive interrupt moderation timer, in
			      microseconds (defaults to 100)

     hw.jme.jme<x>.int_rxct   jme receive interrupt moderation packet counter
			      (defaults to 128)

     hw.jme.jme<x>.int_txto   jme transmit interrupt moderation timer, in
			      microseconds (defaults to 100)

     hw.jme.jme<x>.int_txct   jme transmit interrupt moderation packet counter
			      (defaults to 128)

SEE ALSO
     ifmedia(4), mii(4), netintro(4), pci(4), ifconfig(8)

HISTORY
     The jme device driver first appeared in NetBSD 5.0.

BUGS
     Hardware bugs prevent support of IPv6 receive TCP/UDP checksum offload in
     the JMC250 rev A2, and is disabled in the driver.	This should be revis‐
     ited when a newer hardware revision is available.

BSD			       October 17, 2008				   BSD

                             _         _         _ 
                            | |       | |       | |     
                            | |       | |       | |     
                         __ | | __ __ | | __ __ | | __  
                         \ \| |/ / \ \| |/ / \ \| |/ /  
                          \ \ / /   \ \ / /   \ \ / /   
                           \   /     \   /     \   /    
                            \_/       \_/       \_/ 

Vote for polarhome