kdb5_ldap_util(1M) System Administration Commands kdb5_ldap_util(1M)NAMEkdb5_ldap_util - Kerberos configuration utility
SYNOPSISkdb5_ldap_util [-D user_dn [-w passwd]] [-H ldap_uri] command
[command_options]
DESCRIPTION
The kdb5_ldap_util utility allows an administrator to manage realms,
Kerberos services, and ticket policies. The utility offers a set of
general options, described under OPTIONS, and a set of commands, which,
in turn, have their own options. Commands and their options are
described in their own subsections, below.
OPTIONSkdb5_ldap_util has a small set of general options that apply to the
kdb5_ldap_util utility itself and a larger number of options that apply
to specific commands. A number of these command-specific options apply
to multiple commands and are described in their own section, below.
General Options
The following general options are supported:
-D user_dn
Specifies the distinguished name (DN) of a user who has sufficient
rights to perform the operation on the LDAP server.
-H ldap_uri
Specifies the URI of the LDAP server.
-w passwd
Specifies the password of user_dn. This option is not recommended.
Common Command-specific Options
The following options apply to a number of kdb5_ldap_util commands.
-subtrees subtree_dn_list
Specifies the list of subtrees containing the principals of a
realm. The list contains the DNs of the subtree objects separated
by a colon.
-sscope search_scope
Specifies the scope for searching the principals under a subtree.
The possible values are 1 or one (one level), 2 or sub (subtrees).
-containerref container_reference_dn
Specifies the DN of the container object in which the principals of
a realm will be created. If the container reference is not config‐
ured for a realm, the principals will be created in the realm con‐
tainer.
-maxtktlife max_ticket_life
Specifies maximum ticket life for principals in this realm.
-maxrenewlife max_renewable_ticket_life
Specifies maximum renewable life of tickets for principals in this
realm.
-r realm
Specifies the Kerberos realm of the database; by default the realm
returned by krb5_default_local_realm(3) is used.
kdb5_ldap_util COMMANDS
The kdb5_ldap_util utility comprises a set of commands, each with its
own set of options. These commands are described in the following sub‐
sections.
The create Command
The create command creates a realm in a directory. The command has the
following syntax:
create \
[-subtrees subtree_dn_list]
[-sscope search_scope]
[-containerref container_reference_dn]
[-k mkeytype]
[-m|-P password| -sf stashfilename]
[-s]
[-r realm]
[-maxtktlife max_ticket_life]
[-kdcdn kdc_service_list]
[-admindn admin_service_list]
[-maxrenewlife max_renewable_ticket_life]
[ticket_flags]
The create command has the following options:
-subtree subtree_dn_list
See "Common Command-specific Options," above.
-sscope search_scope
See "Common Command-specific Options," above.
-containerref container_reference_dn
See "Common Command-specific Options," above.
-k mkeytype
Specifies the key type of the master key in the database; the
default is that given in kdc.conf(4).
-m
Specifies that the master database password should be read from the
TTY rather than fetched from a file on the disk.
-P password
Specifies the master database password. This option is not recom‐
mended.
-sf stashfilename
Specifies the stash file of the master database password.
-s
Specifies that the stash file is to be created.
-maxtktlife max_ticket_life
See "Common Command-specific Options," above.
-maxrenewlife max_renewable_ticket_life
See "Common Command-specific Options," above.
-r realm
See "Common Command-specific Options," above.
ticket_flags
Specifies the ticket flags. If this option is not specified, by
default, none of the flags are set. This means all the ticket
options will be allowed and no restriction will be set. See "Ticket
Flags" for a list and descriptions of these flags.
The modify Command
The modify command modifies the attributes of a realm. The command has
the following syntax:
modify \
[-subtrees subtree_dn_list]
[-sscope search_scope]
[-containerref container_reference_dn]
[-r realm]
[-maxtktlife max_ticket_life]
[-maxrenewlife max_renewable_ticket_life]
[ticket_flags]
The modify command has the following options:
-subtree subtree_dn_list
See "Common Command-specific Options," above.
-sscope search_scope
See "Common Command-specific Options," above.
-containerref container_reference_dn
See "Common Command-specific Options," above.
-maxtktlife max_ticket_life
See "Common Command-specific Options," above.
-maxrenewlife max_renewable_ticket_life
See "Common Command-specific Options," above.
-r realm
See "Common Command-specific Options," above.
ticket_flags
Specifies the ticket flags. If this option is not specified, by
default, none of the flags are set. This means all the ticket
options will be allowed and no restriction will be set. See "Ticket
Flags" for a list and descriptions of these flags.
The view Command
The view command displays the attributes of a realm. The command has
the following syntax:
view [-r realm]
The view command has the following option:
-r realm
See "Common Command-specific Options," above.
The destroy Command
The destroy command destroys a realm, including the master key stash
file. The command has the following syntax:
destroy [-f] [-r realm]
The destroy command has the following options:
-f
If specified, destroy does not prompt you for confirmation.
-r realm
See "Common Command-specific Options," above.
The list Command
The list command displays the names of realms. The command has the fol‐
lowing syntax:
list
The list command has no options.
The stashsrvpw Command
The stashsrvpw command enables you to store the password for service
object in a file so that a KDC and Administration server can use it to
authenticate to the LDAP server. The command has the following syntax:
stashsrvpw [-f filename] servicedn
The stashsrvpw command has the following option and argument:
-f filename
Specifies the complete path of the service password file. The
default is:
/var/krb5/service_passwd
servicedn
Specifies the distinguished name (DN) of the service object whose
password is to be stored in file.
The create_policy Command
The create_policy command creates a ticket policy in a directory. The
command has the following syntax:
create_policy \
[-r realm]
[-maxtktlife max_ticket_life]
[-maxrenewlife max_renewable_ticket_life]
[ticket_flags]
policy_name
The create_policy command has the following options:
-r realm
See "Common Command-specific Options," above.
-maxtktlife max_ticket_life
See "Common Command-specific Options," above.
-maxrenewlife max_renewable_ticket_life
See "Common Command-specific Options," above.
ticket_flags
Specifies the ticket flags. If this option is not specified, by
default, none of the flags are set. This means all the ticket
options will be allowed and no restriction will be set. See "Ticket
Flags" for a list and descriptions of these flags.
policy_name
Specifies the name of the ticket policy.
The modify_policy Command
The modify_policy command modifies the attributes of a ticket policy.
The command has the following syntax:
modify_policy \
[-r realm]
[-maxtktlife max_ticket_life]
[-maxrenewlife max_renewable_ticket_life]
[ticket_flags]
policy_name
The modify_policy command has the same options and argument as those
for the create_policy command.
The view_policy Command
The view_policy command displays the attributes of a ticket policy. The
command has the following syntax:
view_policy [-r realm] policy_name
The view_policy command has the following options:
-r realm
See "Common Command-specific Options," above.
policy_name
Specifies the name of the ticket policy.
The destroy_policy Command
The destroy_policy command destroys an existing ticket policy. The com‐
mand has the following syntax:
destroy_policy [-r realm] [-force] policy_name
The destroy_policy command has the following options:
-r realm
See "Common Command-specific Options," above.
-force
Forces the deletion of the policy object. If not specified, you
will be prompted for confirmation before the policy is deleted.
Enter yes to confirm the deletion.
policy_name
Specifies the name of the ticket policy.
The list_policy Command
The list_policy command lists the ticket policies in the default or a
specified realm. The command has the following syntax:
list_policy [-r realm]
The list_policy command has the following option:
-r realm
See "Common Command-specific Options," above.
TICKET FLAGS
A number of kdb5_ldap_util commands have ticket_flag options. These
flags are described as follows:
{-|+}allow_dup_skey
-allow_dup_skey disables user-to-user authentication for principals
by prohibiting principals from obtaining a session key for another
user. This setting sets the KRB5_KDB_DISALLOW_DUP_SKEY flag.
+allow_dup_skey clears this flag.
{-|+}allow_forwardable
-allow_forwardable prohibits principals from obtaining forwardable
tickets. This setting sets the KRB5_KDB_DISALLOW_FORWARDABLE flag.
+allow_forwardable clears this flag.
{-|+}allow_postdated
-allow_postdated prohibits principals from obtaining postdated
tickets. This setting sets the KRB5_KDB_DISALLOW_POSTDATED flag.
+allow_postdated clears this flag.
{-|+}allow_proxiable
-allow_proxiable prohibits principals from obtaining proxiable
tickets. This setting sets the KRB5_KDB_DISALLOW_PROXIABLE flag.
+allow_proxiable clears this flag.
{-|+}allow_renewable
-allow_renewable prohibits principals from obtaining renewable
tickets. This setting sets the KRB5_KDB_DISALLOW_RENEWABLE flag.
+allow_renewable clears this flag.
{-|+}allow_svr
-allow_svr prohibits the issuance of service tickets for princi‐
pals. This setting sets the KRB5_KDB_DISALLOW_SVR flag. +allow_svr
clears this flag.
{-|+}allow_tgs_req
-allow_tgs_req specifies that a Ticket-Granting Service (TGS)
request for a service ticket for principals is not permitted. This
option is useless for most purposes. +allow_tgs_req clears this
flag. The default is +allow_tgs_req. In effect, -allow_tgs_req
sets the KRB5_KDB_DISALLOW_TGT_BASED flag on principals in the
database.
{-|+}allow_tix
-allow_tix forbids the issuance of any tickets for principals.
+allow_tix clears this flag. The default is +allow_tix. In effect,
-allow_tix sets the KRB5_KDB_DISALLOW_ALL_TIX flag on principals in
the database.
{-|+}needchange
+needchange sets a flag in the attributes field to force a password
change; -needchange clears that flag. The default is -needchange.
In effect, +needchange sets the KRB5_KDB_REQUIRES_PWCHANGE flag on
principals in the database.
{-|+}password_changing_service
+password_changing_service sets a flag in the attributes field
marking a principal as a password-change-service principal (a des‐
ignation that is most often not useful). -password_changing_service
clears the flag. That this flag has a long name is intentional. The
default is -password_changing_service. In effect, +password_chang‐
ing_service sets the KRB5_KDB_PWCHANGE_SERVICE flag on principals
in the database.
{-|+}requires_hwauth
+requires_hwauth requires principals to preauthenticate using a
hardware device before being allowed to kinit(1). This setting
sets the KRB5_KDB_REQUIRES_HW_AUTH flag. -requires_hwauth clears
this flag.
{-|+}requires_preauth
+requires_preauth requires principals to preauthenticate before
being allowed to kinit(1). This setting sets the
KRB5_KDB_REQUIRES_PRE_AUTH flag. -requires_preauth clears this
flag.
EXAMPLES
Example 1 Using create
The following is an example of the use of the create command.
# kdb5_ldap_util-D cn=admin,o=org -H ldaps://ldap-server1.mit.edu \
create -subtrees o=org -sscope SUB -r ATHENA.MIT.EDU
Password for "cn=admin,o=org": password entered
Initializing database for realm 'ATHENA.MIT.EDU'
You will be prompted for the database Master Password.
It is important that you NOT FORGET this password.
Enter KDC database master key: master key entered
Re-enter KDC database master key to verify: master key re-enteredjjjjjj
Example 2 Using modify
The following is an example of the use of the modify command.
# kdb5_ldap_util-D cn=admin,o=org -H ldaps://ldap-server1.mit.edu \
modify +requires_preauth -r ATHENA.MIT.EDU
Password for "cn=admin,o=org": password entered
Password for "cn=admin,o=org": password entered
Example 3 Using view
The following is an example of the use of the view command.
# kdb5_ldap_util-D cn=admin,o=org -H ldaps://ldap-server1.mit.edu \
view -r ATHENA.MIT.EDU
Password for "cn=admin,o=org":
Realm Name: ATHENA.MIT.EDU
Subtree: ou=users,o=org
Subtree: ou=servers,o=org
SearchScope: ONE
Maximum ticket life: 0 days 01:00:00
Maximum renewable life: 0 days 10:00:00
Ticket flags: DISALLOW_FORWARDABLE REQUIRES_PWCHANGE
Example 4 Using destroy
The following is an example of the use of the destroy command.
# kdb5_ldap_util-D cn=admin,o=org -H ldaps://ldap-server1.mit.edu \
destroy -r ATHENA.MIT.EDU
Password for "cn=admin,o=org": password entered
Deleting KDC database of 'ATHENA.MIT.EDU', are you sure?
(type 'yes' to confirm)? yes
OK, deleting database of 'ATHENA.MIT.EDU'...
Example 5 Using list
The following is an example of the use of the list command.
# kdb5_ldap_util-D cn=admin,o=org -H ldaps://ldap-server1.mit.edu list
Password for "cn=admin,o=org": password entered
Re-enter Password for "cn=admin,o=org": password re-entered
ATHENA.MIT.EDU
OPENLDAP.MIT.EDU
MEDIA-LAB.MIT.EDU
Example 6 Using stashsrvpw
The following is an example of the use of the stashsrvpw command.
# kdb5_ldap_util stashsrvpw -f \
/home/andrew/conf_keyfile cn=service-kdc,o=org
Password for "cn=service-kdc,o=org": password entered
Re-enter password for "cn=service-kdc,o=org": password re-entered
Example 7 Using create_policy
The following is an example of the use of the create_policy command.
# kdb5_ldap_util-D cn=admin,o=org -H ldaps://ldap-server1.mit.edu \
create_policy -r ATHENA.MIT.EDU \
-maxtktlife "1 day" -maxrenewlife "1 week" \
-allow_postdated +needchange -allow_forwardable tktpolicy
Password for "cn=admin,o=org": password entered
Example 8 Using modify_policy
The following is an example of the use of the modify_policy command.
# kdb5_ldap_util-D cn=admin,o=org -H ldaps://ldap-server1.mit.edu \
modify_policy -r ATHENA.MIT.EDU \
-maxtktlife "60 minutes" -maxrenewlife "10 hours" \
+allow_postdated -requires_preauth tktpolicy
Password for "cn=admin,o=org": password entered
Example 9 Using view_policy
The following is an example of the use of the view_policy command.
# kdb5_ldap_util-D cn=admin,o=org -H ldaps://ldap-server1.mit.edu \
view_policy -r ATHENA.MIT.EDU tktpolicy
Password for "cn=admin,o=org": password entered
Ticket policy: tktpolicy
Maximum ticket life: 0 days 01:00:00
Maximum renewable life: 0 days 10:00:00
Ticket flags: DISALLOW_FORWARDABLE REQUIRES_PWCHANGE
Example 10 Using destroy_policy
The following is an example of the use of the destroy_policy command.
# kdb5_ldap_util-D cn=admin,o=org -H ldaps://ldap-server1.mit.edu \
destroy_policy -r ATHENA.MIT.EDU tktpolicy
Password for "cn=admin,o=org": password entered
This will delete the policy object 'tktpolicy', are you sure?
(type 'yes' to confirm)? yes
** policy object 'tktpolicy' deleted.
Example 11 Using list_policy
The following is an example of the use of the list_policy command.
# kdb5_ldap_util-D cn=admin,o=org -H ldaps://ldap-server1.mit.edu \
list_policy -r ATHENA.MIT.EDU
Password for "cn=admin,o=org": password entered
tktpolicy
tmppolicy
userpolicy
Example 12 Using setsrvpw
The following is an example of the use of the setsrvpw command.
# kdb5_ldap_util setsrvpw -D cn=admin,o=org setsrvpw \
-fileonly -f /home/andrew/conf_keyfile cn=service-kdc,o=org
Password for "cn=admin,o=org": password entered
Password for "cn=service-kdc,o=org": password entered
Re-enter password for "cn=service-kdc,o=org": password re-entered
Example 13 Using create_service
The following is an example of the use of the create_service command.
# kdb5_ldap_util-D cn=admin,o=org create_service \
-kdc -randpw -f /home/andrew/conf_keyfile cn=service-kdc,o=org
Password for "cn=admin,o=org": password entered
File does not exist. Creating the file /home/andrew/conf_keyfile...
Example 14 Using modify_service
The following is an example of the use of the modify_service command.
# kdb5_ldap_util-D cn=admin,o=org modify_service \
-realm ATHENA.MIT.EDU cn=service-kdc,o=org
Password for "cn=admin,o=org": password entered
Changing rights for the service object. Please wait ... done
Example 15 Using view_service
The following is an example of the use of the view_service command.
# kdb5_ldap_util-D cn=admin,o=org view_service \
cn=service-kdc,o=org
Password for "cn=admin,o=org": password entered
Service dn: cn=service-kdc,o=org
Service type: kdc
Service host list:
Realm DN list: cn=ATHENA.MIT.EDU,cn=Kerberos,cn=Security
Example 16 Using destroy_service
The following is an example of the use of the destroy_service command.
# kdb5_ldap_util-D cn=admin,o=org destroy_service \
cn=service-kdc,o=org
Password for "cn=admin,o=org": password entered
This will delete the service object 'cn=service-kdc,o=org', are you sure?
(type 'yes' to confirm)? yes
** service object 'cn=service-kdc,o=org' deleted.
Example 17 Using list_service
The following is an example of the use of the list_service command.
# kdb5_ldap_util-D cn=admin,o=org list_service
Password for "cn=admin,o=org": password entered
cn=service-kdc,o=org
cn=service-adm,o=org
cn=service-pwd,o=org
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
┌─────────────────────────────┬─────────────────────────────┐
│ ATTRIBUTE TYPE │ ATTRIBUTE VALUE │
├─────────────────────────────┼─────────────────────────────┤
│Availability │SUNWkrbu │
├─────────────────────────────┼─────────────────────────────┤
│Interface Stability │Volatile │
└─────────────────────────────┴─────────────────────────────┘
SEE ALSOkinit(1), kadmin(1M), kdc.conf(4), attributes(5)SunOS 5.10 28 Aug 2007 kdb5_ldap_util(1M)
