kevent man page on MirBSD

Man page or keyword search:  
man Server   6113 pages
apropos Keyword Search (all sections)
Output format
MirBSD logo
[printable version]

KQUEUE(2)		   BSD Programmer's Manual		     KQUEUE(2)

NAME
     kqueue, kevent - kernel event notification mechanism

SYNOPSIS
     #include <sys/types.h>
     #include <sys/event.h>
     #include <sys/time.h>

     int
     kqueue(void);

     int
     kevent(int kq, const struct kevent *changelist, int nchanges,
	     struct kevent *eventlist, int nevents,
	     const struct timespec *timeout);

     EV_SET(&kev, ident, filter, flags, fflags, data, udata);

DESCRIPTION
     kqueue() provides a generic method of notifying the user when an event
     happens or a condition holds, based on the results of small pieces of
     kernel code termed "filters". A kevent is identified by the (ident,
     filter) pair; there may only be one unique kevent per kqueue.

     The filter is executed upon the initial registration of a kevent in order
     to detect whether a preexisting condition is present, and is also execut-
     ed whenever an event is passed to the filter for evaluation. If the
     filter determines that the condition should be reported, then the kevent
     is placed on the kqueue for the user to retrieve.

     The filter is also run when the user attempts to retrieve the kevent from
     the kqueue. If the filter indicates that the condition that triggered the
     event no longer holds, the kevent is removed from the kqueue and is not
     returned.

     Multiple events which trigger the filter do not result in multiple
     kevents being placed on the kqueue; instead, the filter will aggregate
     the events into a single struct kevent. Calling close() on a file
     descriptor will remove any kevents that reference the descriptor.

     kqueue() creates a new kernel event queue and returns a descriptor. The
     queue is not inherited by a child created with fork(2). However, if
     rfork(2) is called without the RFFDG flag, then the descriptor table is
     shared, which will allow sharing of the kqueue between two processes.

     kevent() is used to register events with the queue, and return any pend-
     ing events to the user. changelist is a pointer to an array of kevent
     structures, as defined in <sys/event.h>. All changes contained in the
     changelist are applied before any pending events are read from the queue.
     nchanges gives the size of changelist. eventlist is a pointer to an array
     of kevent structures. nevents determines the size of eventlist. When
     nevents is zero, kevent() will return immediately even if there is a
     timeout specified unlike select(2). If timeout is a non-null pointer, it
     specifies a maximum interval to wait for an event, which will be inter-
     preted as a struct timespec. If timeout is a null pointer, kevent() waits
     indefinitely. To effect a poll, the timeout argument should be non-null,
     pointing to a zero-valued timespec structure. The same array may be used
     for the changelist and eventlist.

     EV_SET() is a macro which is provided for ease of initializing a kevent
     structure.

     The kevent structure is defined as:

     struct kevent {
	     uintptr_t ident;	     /* identifier for this event */
	     short     filter;	     /* filter for event */
	     u_short   flags;	     /* action flags for kqueue */
	     u_int     fflags;	     /* filter flag value */
	     intptr_t  data;	     /* filter data value */
	     void      *udata;	     /* opaque user data identifier */
     };

     The fields of struct kevent are:

     ident	Value used to identify this event. The exact interpretation is
		determined by the attached filter, but often is a file
		descriptor.

     filter	Identifies the kernel filter used to process this event. The
		pre-defined system filters are described below.

     flags	Actions to perform on the event.

     fflags	Filter-specific flags.

     data	Filter-specific data value.

     udata	Opaque user-defined value passed through the kernel unchanged.

     The flags field can contain the following values:

     EV_ADD	    Adds the event to the kqueue. Re-adding an existing event
		    will modify the parameters of the original event, and not
		    result in a duplicate entry. Adding an event automatically
		    enables it, unless overridden by the EV_DISABLE flag.

     EV_ENABLE	    Permit kevent() to return the event if it is triggered.

     EV_DISABLE	    Disable the event so kevent() will not return it. The
		    filter itself is not disabled.

     EV_DELETE	    Removes the event from the kqueue. Events which are at-
		    tached to file descriptors are automatically deleted on
		    the last close of the descriptor.

     EV_ONESHOT	    Causes the event to return only the first occurrence of
		    the filter being triggered. After the user retrieves the
		    event from the kqueue, it is deleted.

     EV_CLEAR	    After the event is retrieved by the user, its state is
		    reset. This is useful for filters which report state tran-
		    sitions instead of the current state. Note that some
		    filters may automatically set this flag internally.

     EV_EOF	    Filters may set this flag to indicate filter-specific EOF
		    condition.

     EV_ERROR	    See RETURN VALUES below.

     The predefined system filters are listed below. Arguments may be passed
     to and from the filter via the fflags and data fields in the kevent
     structure.

     EVFILT_READ    Takes a descriptor as the identifier, and returns whenever
		    there is data available to read. The behavior of the
		    filter is slightly different depending on the descriptor
		    type.

		    Sockets
			Sockets which have previously been passed to listen()
			return when there is an incoming connection pending.
			data contains the size of the listen backlog.

			Other socket descriptors return when there is data to
			be read, subject to the SO_RCVLOWAT value of the sock-
			et buffer. This may be overridden with a per-filter
			low water mark at the time the filter is added by set-
			ting the NOTE_LOWAT flag in fflags, and specifying the
			new low water mark in data. On return, data contains
			the number of bytes in the socket buffer.

			If the read direction of the socket has shutdown, then
			the filter also sets EV_EOF in flags, and returns the
			socket error (if any) in fflags. It is possible for
			EOF to be returned (indicating the connection is gone)
			while there is still data pending in the socket
			buffer.

		    Vnodes
			Returns when the file pointer is not at the end of
			file. data contains the offset from current position
			to end of file, and may be negative. If NOTE_EOF is
			set in fflags, kevent() will also return when the file
			pointer is at the end of file. The end of file condi-
			tion is indicated by the presence of NOTE_EOF in
			fflags on return.

		    Fifos, Pipes
			Returns when there is data to read; data contains the
			number of bytes available.

			When the last writer disconnects, the filter will set
			EV_EOF in flags. This may be cleared by passing in
			EV_CLEAR, at which point the filter will resume wait-
			ing for data to become available before returning.

		    BPF devices
			Returns when the BPF buffer is full, the BPF timeout
			has expired, or when the BPF has "immediate mode" en-
			abled and there is any data to read; data contains the
			number of bytes available.

     EVFILT_WRITE   Takes a descriptor as the identifier, and returns whenever
		    it is possible to write to the descriptor. For sockets,
		    pipes, and FIFOs, data will contain the amount of space
		    remaining in the write buffer. The filter will set EV_EOF
		    when the reader disconnects, and for the FIFO case, this
		    may be cleared by use of EV_CLEAR. Note that this filter
		    is not supported for vnodes or BPF devices.

		    For sockets, the low water mark and socket error handling
		    is identical to the EVFILT_READ case.

     EVFILT_AIO	    The sigevent portion of the AIO request is filled in, with
		    sigev_notify_kqueue containing the descriptor of the
		    kqueue that the event should be attached to, sigev_value
		    containing the udata value, and sigev_notify set to
		    SIGEV_KEVENT. When the aio_* function is called, the event
		    will be registered with the specified kqueue, and the
		    ident argument set to the struct aiocb returned by the
		    aio_* function. The filter returns under the same condi-
		    tions as aio_error.

		    Alternatively, a kevent structure may be initialized, with
		    ident containing the descriptor of the kqueue, and the ad-
		    dress of the kevent structure placed in the aio_lio_opcode
		    field of the AIO request. However, this approach will not
		    work on architectures with 64-bit pointers, and should be
		    considered deprecated.

     EVFILT_VNODE   Takes a file descriptor as the identifier and the events
		    to watch for in fflags, and returns when one or more of
		    the requested events occurs on the descriptor. The events
		    to monitor are:

		    NOTE_DELETE	   unlink() was called on the file referenced
				   by the descriptor.

		    NOTE_WRITE	   A write occurred on the file referenced by
				   the descriptor.

		    NOTE_EXTEND	   The file referenced by the descriptor was
				   extended.

		    NOTE_TRUNCATE  The file referenced by the descriptor was
				   truncated.

		    NOTE_ATTRIB	   The file referenced by the descriptor had
				   its attributes changed.

		    NOTE_LINK	   The link count on the file changed.

		    NOTE_RENAME	   The file referenced by the descriptor was
				   renamed.

		    NOTE_REVOKE	   Access to the file was revoked via
				   revoke(2) or the underlying file system was
				   unmounted.

		    On return, fflags contains the events which triggered the
		    filter.

     EVFILT_PROC    Takes the process ID to monitor as the identifier and the
		    events to watch for in fflags, and returns when the pro-
		    cess performs one or more of the requested events. If a
		    process can normally see another process, it can attach an
		    event to it. The events to monitor are:

		    NOTE_EXIT	     The process has exited.

		    NOTE_FORK	     The process has called fork().

		    NOTE_EXEC	     The process has executed a new process
				     via execve(2) or similar call.

		    NOTE_TRACK	     Follow a process across fork() calls. The
				     parent process will return with NOTE_FORK
				     set in the fflags field, while the child
				     process will return with NOTE_CHILD set
				     in fflags and the parent PID in data.

		    NOTE_TRACKERR    This flag is returned if the system was
				     unable to attach an event to the child
				     process, usually due to resource limita-
				     tions.

		    On return, fflags contains the events which triggered the
		    filter.

     EVFILT_SIGNAL  Takes the signal number to monitor as the identifier and
		    returns when the given signal is delivered to the process.
		    This coexists with the signal() and sigaction() facili-
		    ties, and has a lower precedence. The filter will record
		    all attempts to deliver a signal to a process, even if the
		    signal has been marked as SIG_IGN. Event notification hap-
		    pens after normal signal delivery processing. data returns
		    the number of times the signal has occurred since the last
		    call to kevent(). This filter automatically sets the
		    EV_CLEAR flag internally.

RETURN VALUES
     kqueue() creates a new kernel event queue and returns a file descriptor.
     If there was an error creating the kernel event queue, a value of -1 is
     returned and errno set.

     kevent() returns the number of events placed in the eventlist, up to the
     value given by nevents. If an error occurs while processing an element of
     the changelist and there is enough room in the eventlist, then the event
     will be placed in the eventlist with EV_ERROR set in flags and the system
     error in data. Otherwise, -1 will be returned, and errno will be set to
     indicate the error condition. If the time limit expires, then kevent()
     returns 0.

ERRORS
     The kqueue() function fails if:

     [ENOMEM]	   The kernel failed to allocate enough memory for the kernel
		   queue.

     [EMFILE]	   The per-process descriptor table is full.

     [ENFILE]	   The system file table is full.

     The kevent() function fails if:

     [EACCES]	   The process does not have permission to register a filter.

     [EFAULT]	   There was an error reading or writing the kevent structure.

     [EBADF]	   The specified descriptor is invalid.

     [EINTR]	   A signal was delivered before the timeout expired and be-
		   fore any events were placed on the kqueue for return.

     [EINVAL]	   The specified time limit or filter is invalid.

     [ENOENT]	   The event could not be found to be modified or deleted.

     [ENOMEM]	   No memory was available to register the event.

     [ESRCH]	   The specified process to attach to does not exist.

SEE ALSO
     poll(2), read(2), select(2), sigaction(2), write(2), signal(3)

HISTORY
     The kqueue() and kevent() functions first appeared in FreeBSD 4.1.

AUTHORS
     The kqueue() system and this manual page were written by Jonathan Lemon
     <jlemon@FreeBSD.org>.

BUGS
     It is currently not possible to watch FIFOs, AIO, or a vnode that resides
     on anything but a UFS file system.

     The timeout value is limited to 24 hours; longer timeouts will be silent-
     ly reinterpreted as 24 hours.

MirOS BSD #10-current		April 14, 2000				     4
[top]

List of man pages available for MirBSD

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net