ldap.conf man page on OpenDarwin

Printed from http://www.polarhome.com/service/man/?qf=ldap.conf&af=0&tf=2&of=OpenDarwin

LDAP.CONF(5)							  LDAP.CONF(5)

NAME
       ldap.conf, .ldaprc - ldap configuration file

SYNOPSIS
       /etc/openldap/ldap.conf, .ldaprc

DESCRIPTION
       If  the	environment  variable LDAPNOINIT is defined, all defaulting is
       disabled.

       The ldap.conf configuration file is used to set system-wide defaults to
       be applied when running ldap clients.

       Users  may create an optional configuration file, ldaprc or .ldaprc, in
       their home directory which will be used	to  override  the  system-wide
       defaults	 file.	 The  file  ldaprc in the current working directory is
       also used.

       Additional configuration files can be specified using the LDAPCONF  and
       LDAPRC  environment  variables.	 LDAPCONF  may be set to the path of a
       configuration file.  This path can be absolute or relative to the  cur‐
       rent working directory.	The LDAPRC, if defined, should be the basename
       of a file in the current working directory or in the user's home direc‐
       tory.

       Environmental  variables	 may  also  be	used to augment the file based
       defaults.  The name of the variable is the option name  with  an	 added
       prefix  of  LDAP.  For example, to define BASE via the environment, set
       the variable LDAPBASE to the desired value.

       Some options are user-only.  Such options are ignored if present in the
       ldap.conf (or file specified by LDAPCONF).

OPTIONS
       The different configuration options are:

       BASE <base>
	      Specifies the default base DN to use when performing ldap opera‐
	      tions.  The base must be specified as a  Distinguished  Name  in
	      LDAP format.

       BINDDN <dn>
	      Specifies the default bind DN to use when performing ldap opera‐
	      tions.  The bind DN must be specified as a Distinguished Name in
	      LDAP format.  This is a user-only option.

       HOST <name[:port] ...>
	      Specifies	 the  name(s)  of  an LDAP server(s) to which the ldap
	      library should connect.  Each server's name can be specified  as
	      a	 domain-style name or an IP address and optionally followed by
	      a ':' and the port number the ldap server is  listening  on.   A
	      space  separated	list of hosts may be provided.	HOST is depre‐
	      cated in favor of URI.

       PORT <port>
	      Specifies	 the  default  port  used  when	 connecting  to	  LDAP
	      servers(s).   The	 port  may  be specified as a number.  PORT is
	      deprecated in favor of URI.

       SIZELIMIT <integer>
	      Specifies a size limit to use  when  performing  searches.   The
	      number  should be a non-negative integer.	 SIZELIMIT of zero (0)
	      specifies unlimited search size.

       TIMELIMIT <integer>
	      Specifies a time limit to use  when  performing  searches.   The
	      number  should be a non-negative integer.	 TIMELIMIT of zero (0)
	      specifies unlimited search time to be used.

       DEREF <when>
	      Specifies how alias dereferencing	 is  done  when	 performing  a
	      search. The <when> can be specified as one of the following key‐
	      words:

	      never  Aliases are never dereferenced. This is the default.

	      searching
		     Aliases are dereferenced  in  subordinates	 of  the  base
		     object,  but  not	in  locating  the  base	 object of the
		     search.

	      finding
		     Aliases are only  dereferenced  when  locating  the  base
		     object of the search.

	      always Aliases  are dereferenced both in searching and in locat‐
		     ing the base object of the search.

SASL OPTIONS
       If OpenLDAP is built with Simple Authentication and Security Layer sup‐
       port, there are more options you can specify.

       SASL_MECH <mechanism>
	      Specifies	 the  SASL  mechanism  to  use.	  This	is a user-only
	      option.

       SASL_REALM <realm>
	      Specifies the SASL realm.	 This is a user-only option.

       SASL_AUTHCID <authcid>
	      Specifies the authentication  identity.	This  is  a  user-only
	      option.

       SASL_AUTHZID <authcid>
	      Specifies the proxy authorization identity.  This is a user-only
	      option.

       SASL_SECPROPS <properties>
	      Specifies Cyrus SASL security properties. The  <properties>  can
	      be specified as a comma-separated list of the following:

	      none   (without  any  other  properties)	causes	the properties
		     defaults ("noanonymous,noplain") to be cleared.

	      noplain
		     disables  mechanisms  susceptible	 to   simple   passive
		     attacks.

	      noactive
		     disables mechanisms susceptible to active attacks.

	      nodict disables  mechanisms  susceptible	to  passive dictionary
		     attacks.

	      noanonymous
		     disables mechanisms which support anonymous login.

	      forwardsec
		     requires forward secrecy between sessions.

	      passcred
		     requires mechanisms which pass  client  credentials  (and
		     allows mechanisms which can pass credentials to do so).

	      minssf=<factor>
		     specifies the minimum acceptable security strength factor
		     as an integer approximating the effective key length used
		     for  encryption.	0  (zero)  implies  no	protection,  1
		     implies integrity protection only, 56 allows DES or other
		     weak  ciphers,  112  allows  triple  DES and other strong
		     ciphers, 128 allows RC4, Blowfish and other modern strong
		     ciphers.  The default is 0.

	      maxssf=<factor>
		     specifies the maximum acceptable security strength factor
		     as an integer (see minssf description).  The  default  is
		     INT_MAX.

	      maxbufsize=<factor>
		     specifies	the maximum security layer receive buffer size
		     allowed.  0 disables security  layers.   The  default  is
		     65536.

       SIZELIMIT <integer>
	      Specifies	 a  size  limit	 to use when performing searches.  The
	      number should be a non-negative integer.	SIZELIMIT of zero  (0)
	      specifies unlimited search size.

       TIMELIMIT <integer>
	      Specifies	 a  time  limit	 to use when performing searches.  The
	      number should be a non-negative integer.	TIMELIMIT of zero  (0)
	      specifies unlimited search time to be used.

       DEREF <when>
	      Specifies	 how  alias  dereferencing  is	done when performing a
	      search. The <when> can be specified as one of the following key‐
	      words:

	      never  Aliases are never dereferenced. This is the default.

	      searching
		     Aliases  are  dereferenced	 in  subordinates  of the base
		     object, but not  in  locating  the	 base  object  of  the
		     search.

	      finding
		     Aliases  are  only	 dereferenced  when  locating the base
		     object of the search.

	      always Aliases are dereferenced both in searching and in	locat‐
		     ing the base object of the search.

TLS OPTIONS
       If  OpenLDAP  is built with Transport Layer Security support, there are
       more options you can specify.  These options are used when an  ldaps://
       URI is selected (by default or otherwise) or when the application nego‐
       tiates TLS by issuing the LDAP Start TLS operation.

       TLS_CACERT <filename>
	      Specifies the file that contains certificates  for  all  of  the
	      Certificate Authorities the client will recognize.

       TLS_CACERTDIR <path>
	      Specifies	 the  path  of	a  directory that contains Certificate
	      Authority	 certificates  in  separate  individual	  files.   The
	      TLS_CACERT is always used before TLS_CACERTDIR.

       TLS_CERT <filename>
	      Specifies the file that contains the client certificate. This is
	      a user-only option.

       TLS_KEY <filename>
	      Specifies the file that contains the private  key	 that  matches
	      the certificate stored in the TLS_CERT file. Currently, the pri‐
	      vate key must not be protected with a  password,	so  it	is  of
	      critical	importance  that  the key file is protected carefully.
	      This is a user-only option.

       TLS_RANDFILE <filename>
	      Specifies the file to obtain random bits from when  /dev/[u]ran‐
	      dom is not available. Generally set to the name of the EGD/PRNGD
	      socket.  The environment variable RANDFILE can also be  used  to
	      specify the filename.

       TLS_REQCERT <level>
	      Specifies what checks to perform on server certificates in a TLS
	      session, if any. The <level> can be specified as one of the fol‐
	      lowing keywords:

	      never  The  client will not request or check any server certifi‐
		     cate.

	      allow  The server certificate is requested. If no certificate is
		     provided,	the  session  proceeds normally. If a bad cer‐
		     tificate is provided, it will be ignored and the  session
		     proceeds normally.

	      try    The server certificate is requested. If no certificate is
		     provided, the session proceeds normally. If  a  bad  cer‐
		     tificate  is  provided, the session is immediately termi‐
		     nated.

	      demand | hard
		     These keywords are equivalent. The server certificate  is
		     requested.	 If  no certificate is provided, or a bad cer‐
		     tificate is provided, the session is  immediately	termi‐
		     nated. This is the default setting.

ENVIRONMENT VARIABLES
       LDAPNOINIT
	      disable all defaulting

       LDAPCONF
	      path of a configuration file

       LDAPRC basename of ldaprc file in $HOME or $CWD

       LDAP<option-name>
	      Set <option-name> as from ldap.conf

FILES
       /etc/openldap/ldap.conf
	      system-wide ldap configuration file

       $HOME/ldaprc, $HOME/.ldaprc
	      user ldap configuration file

       $CWD/ldaprc
	      local ldap configuration file

SEE ALSO
       ldap(3)

AUTHOR
       Kurt Zeilenga, The OpenLDAP Project

ACKNOWLEDGEMENTS
       OpenLDAP	  is   developed   and	maintained  by	The  OpenLDAP  Project
       (http://www.openldap.org/).  OpenLDAP is	 derived  from	University  of
       Michigan LDAP 3.3 Release.

4.3 Berkeley Distribution	  RELEASEDATE			  LDAP.CONF(5)
[top]

List of man pages available for OpenDarwin

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net