LDAPCOMPARE(1)LDAPCOMPARE(1)NAMEldapcompare - LDAP compare tool
SYNOPSISldapcompare [-n] [-v] [-z] [-k] [-K] [-M[M]] [-d debuglevel]
[-D binddn] [-W] [-w passwd] [-y passwdfile] [-H ldapuri] [-h ldaphost]
[-p ldapport] [-P 2|3] [-O security-properties] [-I] [-Q] [-U authcid]
[-R realm] [-x] [-X authzid] [-Y mech] [-Z[Z]] DN < attr:value |
attr::b64value >
DESCRIPTIONldapcompare is a shell-accessible interface to the ldap_compare(3)
library call.
ldapcompare opens a connection to an LDAP server, binds, and performs a
compare using specified parameters. The DN should be a distinguished
name in the directory. Attr should be a known attribute. If followed
by one colon, the assertion value should be provided as a string. If
followed by two colons, the base64 encoding of the value is provided.
OPTIONS-n Show what would be done, but don't actually perform the compare.
Useful for debugging in conjunction with -v.
-v Run in verbose mode, with many diagnostics written to standard
output.
-z Run in quiet mode, no output is written. You must check the
return status. Useful in shell scripts.
-k Use Kerberos IV authentication instead of simple authentication.
It is assumed that you already have a valid ticket granting
ticket. ldapcompare must be compiled with Kerberos support for
this option to have any effect.
-K Same as -k, but only does step 1 of the Kerberos IV bind. This
is useful when connecting to a slapd and there is no
x500dsa.hostname principal registered with your Kerberos Domain
Controller(s).
-M[M] Enable manage DSA IT control. -MM makes control critical.
-d debuglevel
Set the LDAP debugging level to debuglevel. ldapcompare must be
compiled with LDAP_DEBUG defined for this option to have any
effect.
-x Use simple authentication instead of SASL.
-D binddn
Use the Distinguished Name binddn to bind to the LDAP directory.
-W Prompt for simple authentication. This is used instead of spec‐
ifying the password on the command line.
-w passwd
Use passwd as the password for simple authentication.
-y passwdfile
Use complete contents of passwdfile as the password for simple
authentication.
-H ldapuri
Specify URI(s) referring to the ldap server(s).
-h ldaphost
Specify an alternate host on which the ldap server is running.
Deprecated in favor of -H.
-p ldapport
Specify an alternate TCP port where the ldap server is listen‐
ing. Deprecated in favor of -H.
-P 2|3 Specify the LDAP protocol version to use.
-O security-properties
Specify SASL security properties.
-I Enable SASL Interactive mode. Always prompt. Default is to
prompt only as needed.
-Q Enable SASL Quiet mode. Never prompt.
-U authcid
Specify the authentication ID for SASL bind. The form of the ID
depends on the actual SASL mechanism used.
-R realm
Specify the realm of authentication ID for SASL bind. The form
of the realm depends on the actual SASL mechanism used.
-X authzid
Specify the proxy authorization ID for SASL bind. authzid must
be one of the following formats: dn:<distinguished name> or
u:<username>
-Y mech
Specify the SASL mechanism to be used for authentication. If
it's not specified, the program will choose the best mechanism
the server knows.
-Z[Z] Issue StartTLS (Transport Layer Security) extended operation. If
you use -ZZ, the command will require the operation to be suc‐
cessful.
EXAMPLEldapcompare "uid=babs,dc=example,dc=com" sn Jensen
ldapcompare "uid=babs,dc=example,dc=com" sn:Jensen
ldapcompare "uid=babs,dc=example,dc=com" sn::SmVuc2Vu
are all equivalent.
DIAGNOSTICS
When -z is used, exit status is either 5 if the compare is false, or 6
when the compare is true. Errors result in other non-zero values.
When -z is not used, exit status is zero if no errors occur. Errors
result in a non-zero exit status and a diagnostic message being written
to standard error.
BUGS
Should have a way to specify a url for options or for large binary file
compares.
SEE ALSOldap.conf(5), ldif(5), ldap(3), ldap_compare(3)AUTHOR
The OpenLDAP Project <http://www.openldap.org/>
ACKNOWLEDGEMENTS
OpenLDAP is developed and maintained by The OpenLDAP Project
(http://www.openldap.org/). OpenLDAP is derived from University of
Michigan LDAP 3.3 Release.
OpenLDAP 2.1.X RELEASEDATE LDAPCOMPARE(1)
