LIBIPQ(3) Linux Programmer's Manual LIBIPQ(3)NAMElibipq — iptables userspace packet queuing library.
SYNOPSIS
#include <linux/netfilter.h>
#include <libipq.h>
DESCRIPTIONlibipq is a development library for iptables userspace packet queuing.
Userspace Packet Queuing
Netfilter provides a mechanism for passing packets out of the stack for
queueing to userspace, then receiving these packets back into the ker‐
nel with a verdict specifying what to do with the packets (such as
ACCEPT or DROP). These packets may also be modified in userspace prior
to reinjection back into the kernel.
For each supported protocol, a kernel module called a queue handler may
register with Netfilter to perform the mechanics of passing packets to
and from userspace.
The standard queue handler for IPv4 is ip_queue. It is provided as an
experimental module with 2.4 kernels, and uses a Netlink socket for
kernel/userspace communication.
Once ip_queue is loaded, IP packets may be selected with iptables and
queued for userspace processing via the QUEUE target. For example,
running the following commands:
# modprobe iptable_filter
# modprobe ip_queue
# iptables -A OUTPUT -p icmp -j QUEUE
will cause any locally generated ICMP packets (e.g. ping output) to be
sent to the ip_queue module, which will then attempt to deliver the
packets to a userspace application. If no userspace application is
waiting, the packets will be dropped
An application may receive and process these packets via libipq.
Libipq Overview
Libipq provides an API for communicating with ip_queue. The following
is an overview of API usage, refer to individual man pages for more
details on each function.
Initialisation
To initialise the library, call ipq_create_handle(3). This will
attempt to bind to the Netlink socket used by ip_queue and return an
opaque context handle for subsequent library calls.
Setting the Queue Mode
ipq_set_mode(3) allows the application to specify whether packet meta‐
data, or packet payloads as well as metadata are copied to userspace.
It is also used to initially notify ip_queue that an application is
ready to receive queue messages.
Receiving Packets from the Queue
ipq_read(3) waits for queue messages to arrive from ip_queue and copies
them into a supplied buffer. Queue messages may be packet messages or
error messages.
The type of packet may be determined with ipq_message_type(3).
If it's a packet message, the metadata and optional payload may be
retrieved with ipq_get_packet(3).
To retrieve the value of an error message, use ipq_get_msgerr(3).
Issuing Verdicts on Packets
To issue a verdict on a packet, and optionally return a modified ver‐
sion of the packet to the kernel, call ipq_set_verdict(3).
Error Handling
An error string corresponding to the current value of the internal
error variable ipq_errno may be obtained with ipq_errstr(3).
For simple applications, calling ipq_perror(3) will print the same mes‐
sage as ipq_errstr(3), as well as the string corresponding to the
global errno value (if set) to stderr.
Cleaning Up
To free up the Netlink socket and destroy resources associated with the
context handle, call ipq_destroy_handle(3).
SUMMARYipq_create_handle(3)
Initialise library, return context handle.
ipq_set_mode(3)
Set the queue mode, to copy either packet metadata, or payloads as
well as metadata to userspace.
ipq_read(3)
Wait for a queue message to arrive from ip_queue and read it into a
buffer.
ipq_message_type(3)
Determine message type in the buffer.
ipq_get_packet(3)
Retrieve a packet message from the buffer.
ipq_get_msgerr(3)
Retrieve an error message from the buffer.
ipq_set_verdict(3)
Set a verdict on a packet, optionally replacing its contents.
ipq_errstr(3)
Return an error message corresponding to the internal ipq_errno
variable.
ipq_perror(3)
Helper function to print error messages to stderr.
ipq_destroy_handle(3)
Destroy context handle and associated resources.
EXAMPLE
The following is an example of a simple application which receives
packets and issues NF_ACCEPT verdicts on each packet.
/*
* This code is GPL.
*/
#include <linux/netfilter.h>
#include <libipq.h>
#include <stdio.h>
#define BUFSIZE 2048
static void die(struct ipq_handle *h)
{
ipq_perror("passer");
ipq_destroy_handle(h);
exit(1);
}
int main(int argc, char **argv)
{
int status;
unsigned char buf[BUFSIZE];
struct ipq_handle *h;
h = ipq_create_handle(0, NFPROTO_IPV4);
if (!h)
die(h);
status = ipq_set_mode(h, IPQ_COPY_PACKET, BUFSIZE);
if (status < 0)
die(h);
do{
status = ipq_read(h, buf, BUFSIZE, 0);
if (status < 0)
die(h);
switch (ipq_message_type(buf)) {
case NLMSG_ERROR:
fprintf(stderr, "Received error message %d\n",
ipq_get_msgerr(buf));
break;
case IPQM_PACKET: {
ipq_packet_msg_t *m = ipq_get_packet(buf);
status = ipq_set_verdict(h, m->packet_id,
NF_ACCEPT, 0, NULL);
if (status < 0)
die(h);
break;
}
default:
fprintf(stderr, "Unknown message type!\n");
break;
}
} while (1);
ipq_destroy_handle(h);
return 0;
}
Pointers to more libipq application examples may be found in The Net‐
filter FAQ.
DIAGNOSTICS
For information about monitoring and tuning ip_queue, refer to the
Linux 2.4 Packet Filtering HOWTO.
If an application modifies a packet, it needs to also update any check‐
sums for the packet. Typically, the kernel will silently discard modi‐
fied packets with invalid checksums.
SECURITY
Processes require CAP_NET_ADMIN capabilty to access the kernel ip_queue
module. Such processes can potentially access and modify any IP pack‐
ets received, generated or forwarded by the kernel.
TODO
Per-handle ipq_errno values.
BUGS
Probably.
AUTHOR
James Morris <jmorris@intercode.com.au>
COPYRIGHT
Copyright (c) 2000-2001 Netfilter Core Team.
Distributed under the GNU General Public License.
CREDITS
Joost Remijn implemented the ipq_read timeout feature, which appeared
in the 1.2.4 release of iptables.
Fernando Anton added support for IPv6.
SEE ALSOiptables(8), ipq_create_handle(3), ipq_destroy_handle(3),
ipq_errstr(3), ipq_get_msgerr(3), ipq_get_packet(3), ipq_mes‐
sage_type(3), ipq_perror(3), ipq_read(3), ipq_set_mode(3), ipq_set_ver‐
dict(3).
The Netfilter home page at http://netfilter.samba.org/ which has links
to The Networking Concepts HOWTO, The Linux 2.4 Packet Filtering HOWTO,
The Linux 2.4 NAT HOWTO, The Netfilter Hacking HOWTO, The Netfilter FAQ
and many other useful resources.
Linux iptables 1.2 16 October 2001 LIBIPQ(3)
