mac_biba man page on GhostBSD

Man page or keyword search:  
man Server   9747 pages
apropos Keyword Search (all sections)
Output format
GhostBSD logo
[printable version]

MAC_BIBA(4)		 BSD Kernel Interfaces Manual		   MAC_BIBA(4)

NAME
     mac_biba — Biba data integrity policy

SYNOPSIS
     To compile Biba into your kernel, place the following lines in your ker‐
     nel configuration file:

	   options MAC
	   options MAC_BIBA

     Alternately, to load the Biba module at boot time, place the following
     line in your kernel configuration file:

	   options MAC

     and in loader.conf(5):

	   mac_biba_load="YES"

DESCRIPTION
     The mac_biba policy module implements the Biba integrity model, which
     protects the integrity of system objects and subjects by means of a
     strict information flow policy.  In Biba, all system subjects and objects
     are assigned integrity labels, made up of hierarchal grades, and non-
     hierarchal components.  Together, these label elements permit all labels
     to be placed in a partial order, with information flow protections based
     on a dominance operator describing the order.  The hierarchal grade field
     is expressed as a value between 0 and 65535, with higher values reflect‐
     ing higher integrity.  The non-hierarchal compartment field is expressed
     as a set of up to 256 components, numbered from 0 to 255.	A complete
     label consists of both hierarchal and non-hierarchal elements.

     Three special label values exist:

	   Label	 Comparison
	   biba/low	 lower than all other labels
	   biba/equal	 equal to all other labels
	   biba/high	 higher than all other labels

     The “biba/high” label is assigned to system objects which affect the
     integrity of the system as a whole.  The “biba/equal” label may be used
     to indicate that a particular subject or object is exempt from the Biba
     protections.  These special label values are not specified as containing
     any compartments, although in a label comparison, “biba/high” appears to
     contain all compartments, “biba/equal” the same compartments as the other
     label to which it is being compared, and “biba/low” none.

     In general, Biba access control takes the following model:

     ·	 A subject at the same integrity level as an object may both read from
	 and write to the object as though Biba protections were not in place.

     ·	 A subject at a higher integrity level than an object may write to the
	 object, but not read the object.

     ·	 A subject at a lower integrity level than an object may read the
	 object, but not write to the object.

     ·	 If the subject and object labels may not be compared in the partial
	 order, all access is restricted.

     These rules prevent subjects of lower integrity from influencing the
     behavior of higher integrity subjects by preventing the flow of informa‐
     tion, and hence control, from allowing low integrity subjects to modify
     either a high integrity object or high integrity subjects acting on those
     objects.  Biba integrity policies may be appropriate in a number of envi‐
     ronments, both from the perspective of preventing corruption of the oper‐
     ating system, and corruption of user data if marked as higher integrity
     than the attacker.	 In traditional trusted operating systems, the Biba
     integrity model is used to protect the Trusted Code Base (TCB).

     The Biba integrity model is similar to mac_lomac(4), with the exception
     that LOMAC permits access by a higher integrity subject to a lower
     integrity object, but downgrades the integrity level of the subject to
     prevent integrity rules from being violated.  Biba is a fixed label pol‐
     icy in that all subject and object label changes are explicit, whereas
     LOMAC is a floating label policy.

     The Biba integrity model is also similar to mac_mls(4), with the excep‐
     tion that the dominance operator and access rules are reversed, prevent‐
     ing the downward flow of information rather than the upward flow of
     information.  Multi-Level Security (MLS) protects the confidentiality,
     rather than the integrity, of subjects and objects.

   Label Format
     Almost all system objects are tagged with an effective, active label ele‐
     ment, reflecting the integrity of the object, or integrity of the data
     contained in the object.  In general, objects labels are represented in
     the following form:

	   biba/grade:compartments

     For example:

	   biba/10:2+3+6
	   biba/low

     Subject labels consist of three label elements: an effective (active)
     label, as well as a range of available labels.  This range is represented
     using two ordered Biba label elements, and when set on a process, permits
     the process to change its active label to any label of greater or equal
     integrity to the low end of the range, and lesser or equal integrity to
     the high end of the range.	 In general, subject labels are represented in
     the following form:

	   biba/effectivegrade:effectivecompartments(lograde:locompartments-
	   higrade:hicompartments)

     For example:

	   biba/10:2+3+6(5:2+3-20:2+3+4+5+6)
	   biba/high(low-high)

     Valid ranged labels must meet the following requirement regarding their
     elements:

	   rangehigh ≥ effective ≥ rangelow

     One class of objects with ranges currently exists, the network interface.
     In the case of the network interface, the effective label element refer‐
     ences the default label for packets received over the interface, and the
     range represents the range of acceptable labels of packets to be trans‐
     mitted over the interface.

   Runtime Configuration
     The following sysctl(8) MIBs are available for fine-tuning the enforce‐
     ment of this MAC policy.

     security.mac.biba.enabled	   Enables enforcement of the Biba integrity
				   policy.  (Default: 1).

     security.mac.biba.ptys_equal  Label pty(4)s as “biba/equal” upon cre‐
				   ation.  (Default: 0).

     security.mac.biba.revocation_enabled
				   Revoke access to objects if the label is
				   changed to dominate the subject.  (Default:
				   0).

SEE ALSO
     mac(4), mac_bsdextended(4), mac_ifoff(4), mac_lomac(4), mac_mls(4),
     mac_none(4), mac_partition(4), mac_portacl(4), mac_seeotheruids(4),
     mac_test(4), maclabel(7), mac(9)

HISTORY
     The mac_biba policy module first appeared in FreeBSD 5.0 and was devel‐
     oped by the TrustedBSD Project.

AUTHORS
     This software was contributed to the FreeBSD Project by Network Asso‐
     ciates Labs, the Security Research Division of Network Associates Inc.
     under DARPA/SPAWAR contract N66001-01-C-8035 (“CBOSS”), as part of the
     DARPA CHATS research program.

BSD			       November 18, 2002			   BSD
[top]

List of man pages available for GhostBSD

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net