mail man page on Hurd

Man page or keyword search:  
man Server   6387 pages
apropos Keyword Search (all sections)
Output format
Hurd logo
[printable version]

MAIL(1)			  BSD General Commands Manual		       MAIL(1)

NAME
     mail, mailx, Mail — send and receive mail

SYNOPSIS
     mail [-dEIinv] [-a header] [-b bcc-addr] [-c cc-addr] [-s subject]
	  to-addr ... [-- sendmail-options ...]
     mail [-dEIiNnv] -f [file]
     mail [-dEIiNnv] [-u user]

DESCRIPTION
     mail is an intelligent mail processing system which has a command syntax
     reminiscent of ed(1) with lines replaced by messages.

     The options are as follows:

     -a	     Specify additional header fields on the command line such as "X-
	     Loop: foo@bar" etc.  You have to use quotes if the string con‐
	     tains spaces.  This argument may be specified more than once, the
	     headers will then be concatenated.

     -b bcc-addr
	     Send blind carbon copies to bcc-addr.

     -c cc-addr
	     Send carbon copies to list of users.  cc-addr should be a comma
	     separated list of names.

     -d	     Causes mail to output all sorts of information useful for debug‐
	     ging mail.

     -E	     Don't send messages with an empty body.

     -f [file]
	     Read in the contents of your mailbox (or the specified file) for
	     processing; when you quit, mail writes undeleted messages back to
	     this file.

     -I	     Forces mail to run in interactive mode, even when input is not a
	     terminal.	In particular, the special ~ command character, used
	     when sending mail, is only available interactively.

     -i	     Ignore tty interrupt signals.  This is particularly useful when
	     using mail on noisy phone lines.

     -N	     Inhibits initial display of message headers when reading mail or
	     editing a mail folder.

     -n	     Inhibits reading /etc/mail.rc upon startup.

     -s subject
	     Specify subject on command line (only the first argument after
	     the -s flag is used as a subject; be careful to quote subjects
	     containing spaces).

     -u user
	     Equivalent to:

		   $ mail -f /var/mail/user

	     except that locking is done.

     -v	     Verbose mode.  The details of delivery are displayed on the
	     user's terminal.

   Startup actions
     At startup time, mail will execute commands in the system command file,
     /etc/mail.rc, unless explicitly told not to by using the -n option.
     Next, the commands in the user's personal command file ~/.mailrc are exe‐
     cuted.  mail then examines its command line options to determine whether
     the user requested a new message to be sent or existing messages in a
     mailbox to be examined.

   Sending mail
     To send a message to one or more people, mail can be invoked with argu‐
     ments which are the names of people to whom the mail will be sent.	 You
     are then expected to type in your message, followed by a control-D (‘^D’)
     at the beginning of a line.  The section below, Replying to or
     originating mail, describes some features of mail available to help you
     compose your letter.

   Reading mail
     In normal usage, mail is given no arguments and checks your mail out of
     the post office, then prints out a one line header of each message found.
     The current message is initially set to the first message (numbered 1)
     and can be printed using the print command (which can be abbreviated p).
     Moving among the messages is much like moving between lines in ed(1); you
     may use + and - to shift forwards and backwards, or simply enter a mes‐
     sage number to move directly.

   Disposing of mail
     After examining a message you can delete (d) or reply (r) to it.  Dele‐
     tion causes the mail program to forget about the message.	This is not
     irreversible; the message can be undeleted (u) by giving its number, or
     the mail session can be aborted by giving the exit (x) command.  Deleted
     messages, however, will usually disappear, never to be seen again.

   Specifying messages
     Commands such as print and delete can be given a list of message numbers
     as arguments to apply to a number of messages at once.  Thus delete 1 2
     deletes messages 1 and 2, while delete 1-5 deletes messages 1 through 5.

     Messages may also be selected using one of the following categories:

	   *	   all messages
	   $	   last message
	   :d	   deleted messages
	   :n	   new messages
	   :o	   old messages
	   :r	   read messages
	   :u	   unread messages

     Thus the command top, which prints the first few lines of a message,
     could be used in top * to print the first few lines of all messages.

   Replying to or originating mail
     You can use the reply command to set up a response to a message, sending
     it back to the person who it was from.  Text you then type in, up to an
     end-of-file, defines the contents of the message.	While you are compos‐
     ing a message, mail treats lines beginning with the tilde (‘~’) character
     specially.	 For instance, typing ~m (alone on a line) will place a copy
     of the current message into the response, right shifting it by a single
     tab-stop (see the indentprefix variable, below).  Other escapes will set
     up subject fields, add and delete recipients to the message, and allow
     you to escape to an editor to revise the message or to a shell to run
     some commands.  (These options are given in the summary below.)

   Ending a mail processing session
     You can end a mail session with the quit (q) command.  Messages which
     have been examined go to your mbox file unless they have been deleted, in
     which case they are discarded.  Unexamined messages go back to the post
     office (see the -f option above).

   Personal and system wide distribution lists
     It is also possible to create personal distribution lists so that, for
     instance, you can send mail to “cohorts” and have it go to a group of
     people.  Such lists can be defined by placing a line like

	   alias cohorts bill ozalp jkf mark kridle@ucbcory

     in the file .mailrc in your home directory.  The current list of such
     aliases can be displayed with the alias command in mail.  System wide
     distribution lists can be created by editing /etc/aliases, (see
     aliases(5) and sendmail(8)); these are kept in a different syntax.	 In
     mail you send, personal aliases will be expanded in mail sent to others
     so that they will be able to reply to the recipients.  System wide
     aliases are not expanded when the mail is sent, but any reply returned to
     the machine will have the system wide alias expanded as all mail goes
     through sendmail.

   Network mail (ARPA, UUCP, Berknet)
     See mailaddr(7) for a description of network addresses.

     mail has a number of options which can be set in the .mailrc file to
     alter its behavior; thus set askcc enables the askcc feature.  (These
     options are summarized below.)

SUMMARY
     (Adapted from the “Mail Reference Manual”.)

     Each command is typed on a line by itself, and may take arguments follow‐
     ing the command word.  The command need not be typed in its entirety --
     the first command which matches the typed prefix is used.	For commands
     which take message lists as arguments, if no message list is given, then
     the next message forward which satisfies the command's requirements is
     used.  If there are no messages forward of the current message, the
     search proceeds backwards, and if there are no good messages at all, mail
     types “No applicable messages” and aborts the command.

     -	     Print out the preceding message.  If given a numeric argument n,
	     goes to the nth previous message and prints it.

     ?	     Prints a brief summary of commands.

     !	     Executes the shell (see sh(1) and csh(1)) command which follows.

     alias   (a) With no arguments, prints out all currently defined aliases.
	     With one argument, prints out that alias.	With more than one
	     argument, creates a new alias or changes an old one.

     alternates
	     (alt) The alternates command is useful if you have accounts on
	     several machines.	It can be used to inform mail that the listed
	     addresses are really you.	When you reply to messages, mail will
	     not send a copy of the message to any of the addresses listed on
	     the alternates list.  If the alternates command is given with no
	     argument, the current set of alternate names is displayed.

     chdir   (c) Changes the user's working directory to that specified, if
	     given.  If no directory is given, then changes to the user's
	     login directory.

     copy    (co) The copy command does the same thing that save does, except
	     that it does not mark the messages it is used on for deletion
	     when you quit.

     delete  (d) Takes a list of messages as argument and marks them all as
	     deleted.  Deleted messages will not be saved in mbox, nor will
	     they be available for most other commands.

     dp	     (also dt) Deletes the current message and prints the next mes‐
	     sage.  If there is no next message, mail says “No more messages.”

     edit    (e) Takes a list of messages and points the text editor at each
	     one in turn.  On return from the editor, the message is read back
	     in.

     exit    (ex or x) Effects an immediate return to the shell without modi‐
	     fying the user's system mailbox, his mbox file, or his edit file
	     in -f.

     file    (fi) The same as folder.

     folder  (fo) The folder command switches to a new mail file or folder.
	     With no arguments, it tells you which file you are currently
	     reading.  If you give it an argument, it will write out changes
	     (such as deletions) you have made in the current file and read in
	     the new file.  Some special conventions are recognized for the
	     name.  # means the previous file, % means your system mailbox,
	     %user means user's system mailbox, & means your mbox file, and
	     +folder means a file in your folder directory.

     folders
	     List the names of the folders in your folder directory.

     from    (f) Takes a list of messages and prints their message headers.

     headers
	     (h) Lists the current windowful of headers.  To view the next or
	     previous group of headers, see the z command.

     help    A synonym for ?.

     hold    (ho, also preserve) Takes a message list and marks each message
	     therein to be saved in the user's system mailbox instead of in
	     mbox.  Does not override the delete command.

     ignore  Add the list of header fields named to the ignored list.  Header
	     fields in the ignore list are not printed on your terminal when
	     you print a message.  This command is very handy for suppression
	     of certain machine-generated header fields.  The Type and Print
	     commands can be used to print a message in its entirety, includ‐
	     ing ignored fields.  If ignore is executed with no arguments, it
	     lists the current set of ignored fields.

     inc     Incorporate any new messages that have arrived while mail is
	     being read.  The new messages are added to the end of the message
	     list, and the current message is reset to be the first new mail
	     message.  This does not renumber the existing message list, nor
	     does it cause any changes made so far to be saved.

     list    (l) List the valid mail commands.

     mail    (m) Takes as argument login names and distribution group names
	     and sends mail to those people.

     mbox    Indicate that a list of messages be sent to mbox in your home
	     directory when you quit.  This is the default action for messages
	     if you do not have the hold option set.

     more    (mo) Takes a message list and invokes the pager on that list.

     next    (n) (like + or CR) Goes to the next message in sequence and types
	     it.  With an argument list, types the next matching message.

     preserve
	     (pre) A synonym for hold.

     Print   (P) Like print but also prints out ignored header fields.	See
	     also print, ignore, and retain.

     print   (p) Takes a message list and types out each message on the user's
	     terminal.

     quit    (q) Terminates the session, saving all undeleted, unsaved mes‐
	     sages in the user's mbox file in his login directory, preserving
	     all messages marked with hold or preserve or never referenced in
	     his system mailbox, and removing all other messages from his sys‐
	     tem mailbox.  If new mail has arrived during the session, the
	     message “You have new mail” is given.  If given while editing a
	     mailbox file with the -f flag, then the edit file is rewritten.
	     A return to the shell is effected, unless the rewrite of edit
	     file fails, in which case the user can escape with the exit com‐
	     mand.

     Reply   (R) Reply to originator.  Does not reply to other recipients of
	     the original message.

     reply   (r) Takes a message list and sends mail to the sender and all
	     recipients of the specified message.  The default message must
	     not be deleted.

     respond
	     A synonym for reply.

     retain  Add the list of header fields named to the retained list.	Only
	     the header fields in the retain list are shown on your terminal
	     when you print a message.	All other header fields are sup‐
	     pressed.  The Type and Print commands can be used to print a mes‐
	     sage in its entirety.  If retain is executed with no arguments,
	     it lists the current set of retained fields.

     save    (s) Takes a message list and a filename and appends each message
	     in turn to the end of the file.  The filename in quotes, followed
	     by the line count and character count is echoed on the user's
	     terminal.

     saveignore
	     saveignore is to save what ignore is to print and type.  Header
	     fields thus marked are filtered out when saving a message by save
	     or when automatically saving to mbox.

     saveretain
	     saveretain is to save what retain is to print and type.  Header
	     fields thus marked are the only ones saved with a message when
	     saving by save or when automatically saving to mbox.  saveretain
	     overrides saveignore.

     set     (se) With no arguments, prints all variable values.  Otherwise,
	     sets option.  Arguments are of the form option=value (no space
	     before or after =) or option.  Quotation marks may be placed
	     around any part of the assignment statement to quote blanks or
	     tabs, i.e., set indentprefix="->".

     shell   (sh) Invokes an interactive version of the shell.

     size    Takes a message list and prints out the size in characters of
	     each message.

     source  The source command reads commands from a file.

     top     Takes a message list and prints the top few lines of each.	 The
	     number of lines printed is controlled by the variable toplines
	     and defaults to five.

     Type    (T) Identical to the Print command.

     type    (t) A synonym for print.

     unalias
	     Takes a list of names defined by alias commands and discards the
	     remembered groups of users.  The group names no longer have any
	     significance.

     undelete
	     (u) Takes a message list and marks each message as not being
	     deleted.

     unread  (U) Takes a message list and marks each message as not having
	     been read.

     unset   Takes a list of option names and discards their remembered val‐
	     ues; the inverse of set.

     visual  (v) Takes a message list and invokes the display editor on each
	     message.

     write   (w) Similar to save, except that only the message body (without
	     the header) is saved.  Extremely useful for such tasks as sending
	     and receiving source program text over the message system.

     xit     (x) A synonym for exit.

     z	     mail presents message headers in windowfuls as described under
	     the headers command.  You can move mail's attention forward to
	     the next window with the z command.  Also, you can move to the
	     previous window by using z-.

   Tilde/escapes
     Here is a summary of the tilde escapes, which are used when composing
     messages to perform special functions.  Tilde escapes are only recognized
     at the beginning of lines.	 The name “tilde escape” is somewhat of a mis‐
     nomer since the actual escape character can be set by the option escape.

     ~bname ...
	     Add the given names to the list of carbon copy recipients but do
	     not make the names visible in the Cc: line ("blind" carbon copy).

     ~cname ...
	     Add the given names to the list of carbon copy recipients.

     ~d	     Read the file dead.letter from your home directory into the mes‐
	     sage.

     ~e	     Invoke the text editor on the message collected so far.  After
	     the editing session is finished, you may continue appending text
	     to the message.

     ~Fmessages
	     Identical to ~f, except all message headers are included.

     ~fmessages
	     Read the named messages into the message being sent.  If no mes‐
	     sages are specified, read in the current message.	Message head‐
	     ers currently being ignored (by the ignore or retain command) are
	     not included.

     ~h	     Edit the message header fields by typing each one in turn and
	     allowing the user to append text to the end or modify the field
	     by using the current terminal erase and kill characters.

     ~Mmessages
	     Identical to ~m, except all message headers are included.

     ~mmessages
	     Read the named messages into the message being sent, indented by
	     a tab or by the value of indentprefix.  If no messages are speci‐
	     fied, read the current message.  Message headers currently being
	     ignored (by the ignore or retain command) are not included.

     ~p	     Print out the message collected so far, prefaced by the message
	     header fields.

     ~q	     Abort the message being sent, copying the message to dead.letter
	     in your home directory if save is set.
     ~Rstring
	     Use string as the Reply-To field.

     ~rfilename
     ~<filename
	     Read the named file into the message.

     ~sstring
	     Cause the named string to become the current subject field.

     ~tname ...
	     Add the given names to the direct recipient list.

     ~v	     Invoke an alternate editor (defined by the VISUAL option) on the
	     message collected so far.	Usually, the alternate editor will be
	     a screen editor.  After you quit the editor, you may resume
	     appending text to the end of your message.

     ~wfilename
	     Write the message onto the named file.

     ~x	     Abort the message being sent.  No message is copied to
	     ~/dead.letter, even if save is set.

     ~?	     Prints a brief summary of tilde escapes.

     ~!command
	     Execute the indicated shell command, then return to the message.

     ~|command
	     Pipe the message through the command as a filter.	If the command
	     gives no output or terminates abnormally, retain the original
	     text of the message.  The command fmt(1) is often used as command
	     to rejustify the message.

     ~:mail-command
     ~_mail-command
	     Execute the given mail command.  Not all commands, however, are
	     allowed.

     ~~string
	     Insert the string of text in the message prefaced by a single ~.
	     If you have changed the escape character, then you should double
	     that character in order to send it.

     ~.	     Simulate end of file on input.

   Mail options
     Options are controlled via set and unset commands.	 Options may be either
     binary, in which case it is only significant to see whether they are set
     or not; or string, in which case the actual value is of interest.	The
     binary options include the following:

     append  Causes messages saved in mbox to be appended to the end rather
	     than prepended.  This should always be set (perhaps in
	     /etc/mail.rc).

     ask, asksub
	     Causes mail to prompt you for the subject of each message you
	     send.  If you respond with simply a newline, no subject field
	     will be sent.

     askbcc  Causes you to be prompted for additional blind carbon copy recip‐
	     ients at the end of each message.	Responding with a newline
	     indicates your satisfaction with the current list.

     askcc   Causes you to be prompted for additional carbon copy recipients
	     at the end of each message.  Responding with a newline indicates
	     your satisfaction with the current list.

     autoinc
	     Causes new mail to be automatically incorporated when it arrives.
	     Setting this is similar to issuing the inc command at each
	     prompt, except that the current message is not reset when new
	     mail arrives.

     autoprint
	     Causes the delete command to behave like dp; thus, after deleting
	     a message, the next one will be typed automatically.

     debug   Setting the binary option debug is the same as specifying -d on
	     the command line and causes mail to output all sorts of informa‐
	     tion useful for debugging mail.

     dot     The binary option dot causes mail to interpret a period alone on
	     a line as the terminator of a message you are sending.

     hold    This option is used to hold messages in the system mailbox by
	     default.

     ignore  Causes interrupt signals from your terminal to be ignored and
	     echoed as @'s.

     ignoreeof
	     An option related to dot is ignoreeof which makes mail refuse to
	     accept a control-D as the end of a message.  ignoreeof also
	     applies to mail command mode.

     keep    Setting this option causes mail to truncate your system mailbox
	     instead of deleting it when it's empty.

     keepsave
	     Messages saved with the save command are not normally saved in
	     mbox at quit time.	 Use this option to retain those messages.

     metoo   Usually, when a group is expanded that contains the sender, the
	     sender is removed from the expansion.  Setting this option causes
	     the sender to be included in the group.

     noheader
	     Setting the option noheader is the same as giving the -N flag on
	     the command line.

     nosave  Normally, when you abort a message with two interrupt characters
	     (usually control-C), mail copies the partial letter to the file
	     dead.letter in your home directory.  Setting the binary option
	     nosave prevents this.

     quiet   Suppresses the printing of the version when first invoked.

     Replyall
	     Reverses the sense of reply and Reply commands.

     searchheaders
	     If this option is set, then a message-list specifier in the form
	     “/x:y” will expand to all messages containing the substring ‘y’
	     in the header field ‘x’.  The string search is case insensitive.
	     If ‘x’ is omitted, it will default to the “Subject” header field.
	     The form “/to:y” is a special case, and will expand to all mes‐
	     sages containing the substring ‘y’ in the “To”, “Cc” or “Bcc”
	     header fields.  The check for “to” is case sensitive, so that
	     “/To:y” can be used to limit the search for ‘y’ to just the “To:”
	     field.

     skipempty
	     Don't send messages with an empty body.

     verbose
	     Setting the option verbose is the same as using the -v flag on
	     the command line.	When mail runs in verbose mode, the actual
	     delivery of messages is displayed on the user's terminal.

   Option string values
     EDITOR	   Pathname of the text editor to use in the edit command and
		   ~e escape.  If not defined, /usr/bin/ex is used.

     LISTER	   Pathname of the directory lister to use in the folders com‐
		   mand.  Default is /bin/ls.

     MBOX	   The name of the mbox file.  It can be the name of a folder.
		   The default is “mbox” in the user's home directory.

     PAGER	   Pathname of the program to use in the more command or when
		   the crt variable is set.  The default paginator more(1) is
		   used if this option is not defined.

     REPLYTO	   If set, will be used to initialize the Reply-To field for
		   outgoing messages.

     SHELL	   Pathname of the shell to use in the ! command and the ~!
		   escape.  A default shell is used if this option is not
		   defined.

     TMPDIR	   Directory in which temporary files are stored.

     VISUAL	   Pathname of the text editor to use in the visual command
		   and ~v escape.  If not defined, /usr/bin/vi is used.

     crt	   The valued option crt is used as a threshold to determine
		   how long a message must be before PAGER is used to read it.
		   If crt is set without a value, then the height of the ter‐
		   minal screen stored in the system is used to compute the
		   threshold (see stty(1)).

     escape	   If defined, the first character of this option gives the
		   character to use in the place of ~ to denote escapes.

     folder	   The name of the directory to use for storing folders of
		   messages.  If this name begins with a ‘/’, mail considers
		   it to be an absolute pathname; otherwise, the folder direc‐
		   tory is found relative to your home directory.

     indentprefix  String used by the ~m tilde escape for indenting messages,
		   in place of the normal tab character (‘^I’).	 Be sure to
		   quote the value if it contains spaces or tabs.

     record	   If defined, gives the pathname of the file used to record
		   all outgoing mail.  If not defined, then outgoing mail is
		   not so saved.

     screen	   Size of window of message headers for z.

     sendmail	   Pathname to an alternative mail delivery system.

     toplines	   If defined, gives the number of lines of a message to be
		   printed out with the top command; normally, the first five
		   lines are printed.

ENVIRONMENT
     mail utilizes the HOME, LOGNAME, USER, SHELL, DEAD, PAGER, LISTER,
     EDITOR, VISUAL, REPLYTO, MAIL, MAILRC, and MBOX environment variables.

     If the MAIL environment variable is set, its value is used as the path to
     the user's mail spool.

FILES
     /var/mail/*		      post office (unless overridden by the
				      MAIL environment variable)
     ~/mbox			      user's old mail
     ~/.mailrc			      file giving initial mail commands; can
				      be overridden by setting the MAILRC
				      environment variable
     /tmp/R*			      temporary files
     /usr/share/bsd-mailx/mail.*help  help files
     /etc/mail.rc		      system initialization file

EXIT STATUS
     The mail utility exits 0 on success, and >0 if an error occurs.

SEE ALSO
     fmt(1), newaliases(1), vacation(1), aliases(5), mailaddr(7),
     mail.local(8), newaliases(8), sendmail(8)

STANDARDS
     The mailx utility is compliant with the IEEE Std 1003.1-2008 (“POSIX.1”)
     specification.

     The flags [-abcdeEIv] are extensions to that specification.

HISTORY
     A mail command appeared in Version 3 AT&T UNIX.  This man page is derived
     from the Mail Reference Manual originally written by Kurt Shoens.

BUGS
     There are some flags that are not documented here.	 Most are not useful
     to the general user.

     Usually, Mail and mailx are just links to mail, which can be confusing.

BSD				March 29, 2024				   BSD
[top]

List of man pages available for Hurd

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net