makeaddr man page on BSDi

Man page or keyword search:  
man Server   6284 pages
apropos Keyword Search (all sections)
Output format
BSDi logo
[printable version]

INET(3)			    BSD Programmer's Manual		       INET(3)

NAME
     inet_addr, inet_aton, inet_lnaof, inet_makeaddr, inet_netof,
     inet_network, inet_ntoa, inet_ntop, inet_pton - Internet address manipu-
     lation routines

SYNOPSIS
     #include <sys/types.h>
     #include <netinet/in.h>
     #include <arpa/inet.h>

     unsigned long
     inet_addr(const char *cp);

     int
     inet_aton(const char *cp, struct in_addr *pin);

     unsigned long
     inet_lnaof(struct in_addr in);

     struct in_addr
     inet_makeaddr(int net, int lna);

     unsigned long
     inet_netof(struct in_addr in);

     unsigned long
     inet_network(const char *cp);

     char *
     inet_ntoa(struct in_addr in);

     const char *
     inet_ntop(int af, const void *src, char *dst, size_t size);

     int
     inet_pton(int af, const char *src, void *dst);

DESCRIPTION
     The routines inet_aton(), inet_addr() and inet_network() interpret char-
     acter strings representing numbers expressed in the Internet standard `.'
     notation.	The inet_pton() function converts a presentation format ad-
     dress (that is, printable form as held in a character string) to network
     format (usually a struct in_addr or some other internal binary represen-
     tation, in network byte order).  It returns 1 if the address was valid
     for the specified address family, or 0 if the address wasn't parseable in
     the specified address family, or -1 if some system error occurred (in
     which case errno() will have been set).  This function is presently valid
     for AF_INET and AF_INET6.	The inet_aton() routine interprets the speci-
     fied character string as an Internet address, placing the address into
     the structure provided.  It returns 1 if the string was successfully in-
     terpreted, or 0 if the string is invalid.	The inet_addr() and
     inet_network() functions return numbers suitable for use as Internet ad-
     dresses and Internet network numbers, respectively.

     The function inet_ntop() converts an address from network format (usually
     a struct in_addr or some other binary form, in network byte order) to
     presentation format (suitable for external display purposes).  It returns
     NULL if a system error occurs (in which case, errno() will have been
     set), or it returns a pointer to the destination string.  The routine
     inet_ntoa() takes an Internet address and returns an ASCII string repre-
     senting the address in `.' notation.  The routine inet_makeaddr() takes
     an Internet network number and a local network address and constructs an
     Internet address from it.	The routines inet_netof() and inet_lnaof()
     break apart Internet host addresses, returning the network number and lo-
     cal network address part, respectively.

     All Internet addresses are returned in network order (bytes ordered from
     left to right).  All network numbers and local address parts are returned
     as machine format integer values.

INTERNET ADDRESSES (IP VERSION 4)
     Values specified using the `.' notation take one of the following forms:

	   a.b.c.d
	   a.b.c
	   a.b
	   a

     When four parts are specified, each is interpreted as a byte of data and
     assigned, from left to right, to the four bytes of an Internet address.
     Note that when an Internet address is viewed as a 32-bit integer quantity
     on a system that uses little-endian byte order (such as the Intel 386,
     486 and Pentium processors) the bytes referred to above appear as
     ``d.c.b.a''. That is, little-endian bytes are ordered from right to left.

     When a three part address is specified, the last part is interpreted as a
     16-bit quantity and placed in the right-most two bytes of the network ad-
     dress.  This makes the three part address format convenient for specify-
     ing Class B network addresses as ``128.net.host''.

     When a two part address is supplied, the last part is interpreted as a
     24-bit quantity and placed in the right most three bytes of the network
     address.  This makes the two part address format convenient for specify-
     ing Class A network addresses as ``net.host''.

     When only one part is given, the value is stored directly in the network
     address without any byte rearrangement.

     All numbers supplied as ``parts'' in a `.' notation may be decimal, oc-
     tal, or hexadecimal, as specified in the C language (i.e., a leading 0x
     or 0X implies hexadecimal; otherwise, a leading 0 implies octal; other-
     wise, the number is interpreted as decimal).

INTERNET ADDRESSES (IP VERSION 6)
     The presentation format of an IPv6 address is given in [RFC1884 2.2]:

     There are three conventional forms for representing IPv6 addresses as
     text strings:

     1.	  The preferred form is x:x:x:x:x:x:x:x, where the 'x's are the hex-
	  adecimal values of the eight 16-bit pieces of the address.  Exam-
	  ples:

		FEDC:BA98:7654:3210:FEDC:BA98:7654:3210
		1080:0:0:0:8:800:200C:417A

	  Note that it is not necessary to write the leading zeros in an indi-
	  vidual field, but there must be at least one numeral in every field
	  (except for the case described in 2.).

     2.	  Due to the method of allocating certain styles of IPv6 addresses, it
	  will be common for addresses to contain long strings of zero bits.
	  In order to make writing addresses

	  containing zero bits easier a special syntax is available to com-
	  press the zeros.  The use of ``::'' indicates multiple groups of
	  16-bits of zeros.  The ``::'' can only appear once in an address.
	  The ``::'' can also be used to compress the leading and/or trailing
	  zeros in an address.

	  For example the following addresses:

		1080:0:0:0:8:800:200C:417A  a unicast address
		FF01:0:0:0:0:0:0:43	    a multicast address
		0:0:0:0:0:0:0:1		    the loopback address
		0:0:0:0:0:0:0:0		    the unspecified addresses

	  may be represented as:

		1080::8:800:200C:417A	    a unicast address
		FF01::43		    a multicast address
		::1			    the loopback address
		::			    the unspecified addresses

     3.	  An alternative form that is sometimes more convenient when dealing
	  with a mixed environment of IPv4 and IPv6 nodes is
	  x:x:x:x:x:x:d.d.d.d, where the 'x's are the hexadecimal values of
	  the six high-order 16-bit pieces of the address, and the 'd's are
	  the decimal values of the four low-order 8-bit pieces of the address
	  (standard IPv4 representation).  Examples:

		0:0:0:0:0:0:13.1.68.3
		0:0:0:0:0:FFFF:129.144.52.38

	  or in compressed form:

		::13.1.68.3
		::FFFF:129.144.52.38

DIAGNOSTICS
     The constant INADDR_NONE is returned by inet_addr() and inet_network()
     for malformed requests.

SEE ALSO
     byteorder(3),  gethostbyname(3),  getnetent(3),  hosts(5),	 networks(5)

STANDARDS
     The inet_ntop and inet_pton functions conforms to the IETF IPng BSD API
     and address formatting specifications.  Note that inet_pton does not ac-
     cept 1-, 2-, or 3-part  dotted addresses; all four parts must be speci-
     fied.  This is a narrower input set than that accepted by inet_aton.

HISTORY
     The inet_addr, inet_network, inet_makeaddr, inet_lnaof and inet_netof
     functions appeared in 4.2BSD. The inet_aton and inet_ntoa functions ap-
     peared in 4.3BSD. The inet_pton and inet_ntop functions appeared in BIND
     4.9.4 and thence BSD/OS 3.0.

BUGS
     The value INADDR_NONE (0xffffffff) is a valid broadcast address, but
     inet_addr() cannot return that value without indicating failure.  The
     newer inet_aton() function does not share this problem.

     The problem of host byte ordering versus network byte ordering is confus-
     ing.

     The string returned by inet_ntoa() resides in a static memory area.

     inet_addr() should return a struct in_addr.

4.2 Berkeley Distribution	 June 4, 1993				     3
[top]

List of man pages available for BSDi

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net