MIKMOD(1)MIKMOD(1)NAMEmikmod - play soundtracker etc. modules on a Unix machine.
SYNOPSISmikmod [-options]... [module|playlist]...
DESCRIPTION
MikMod is a very portable module player based on libmikmod, written
originally by Jean-Paul Mikkers (MikMak). It will play the IT, XM, MOD,
MTM, S3M, STM, ULT, FAR, MED, DSM, AMF, IMF and 669 module formats. It
works under AIX, FreeBSD, HP-UX, IRIX, Linux, NetBSD, OpenBSD, OSF/1,
SunOS, Solaris and OS/2. It is controllable via an easy-to-use curses
interface and will extract and play modules from a variety of different
archive formats.
OPTIONS
Options can be given in any order, and are case-sensitive. For the
options which have both a short and a long form, the long form can be
prefixed by one or two dashes. Note that the settings in your
$HOME/.mikmodrc will override the defaults shown in this man page.
OUTPUT OPTIONS-d n
--driver n
Use the specified device driver for output, 0 is autodetect. The
default is 0. If your installed libmikmod engine is recent
enough (>=3.1.7), you can also specify the driver with an alias,
as well as driver options separated by commas. The list and
driver aliases and recognized options can be found in libmik‐
mod's documentation.
-o[utput] 8m|8s|16m|16s
Output settings, 8 or 16 bit in stereo or mono. The default is
"16s".
-f freq
--frequency freq
Set mixing frequency in hertz. The default is 44100.
-i
--interpolate
Use interpolated mixing. This will generally improve audio qual‐
ity, at the expense of a bit more CPU usage. Note that this
option alters the behaviour of software drivers only ; hardware
drivers are not affected.
--nointerpolate
Do not use interpolated mixing (default).
-hq
--hqmixer
Use high quality software mixer. This improves audio quality,
but requires a lot more CPU power. Note that this option alters
the behaviour of software drivers only ; hardware drivers are
not affected.
--nohqmixer
Do not use high quality software mixer (default).
-s
--surround
Use surround mixing.
--nosurround
Do not use surround mixing (default).
-r n
--reverb n
Sets reverb amount from 0 (no reverb) to 15 (max reverb). The
default is 0 (no reverb).
PLAYBACK OPTIONS-v volume
--volume volume
Set volume from 0% (silence) to 100%. The default is 100%.
-F
--fadeout
Fade out the volume during the last pattern of each module.
--nofadeout
Do not fade out the volume during the last pattern of each mod‐
ule (default).
-l
--loops
Enable in-module backwards loops.
--noloops
Disable in-module backwards loops (default).
-a
--panning
Process panning effects (default). This should be disabled
(using --nopanning) for very old demo modules which use the pan‐
ning effects for synchronization purposes.
--nopanning
Do not process panning effects.
-x
--protracker
Enable protracker extended speed effect (default). This should
be disabled (using --noprotracker) for very old demo modules
which use the extended speed effect for synchronization pur‐
poses.
--noprotracker
Disable protracker extended speed effect.
LOADING OPTIONS-c
--curious
Look for hidden patterns in module. Most modules don't have hid‐
den patterns, but you can find "bonus" patterns (or just
silence) in some modules.
--nocurious
Do not look for hidden patterns in module (default).
-p n
--playmode n
Playlist mode. The allowed values here are 0, to loop the cur‐
rent module ; 1, to play the whole playlist once ; 2, to play
the whole playlist repeatedly, and 3, to play the whole playlist
randomly. The default is 2.
-t
--tolerant
Don't halt MikMod if a module cannot be read or is an unknown
format.
--notolerant
Halt MikMod if a module cannot be read or is an unknown format
(default).
SCHEDULING OPTIONS
The following options need root privileges (or a setuid root binary),
and don't work under all systems.
-s Y|N
--renice Y|N
Renice to -20 if possible to gain more CPU priority. This option
is only available under FreeBSD, Linux, NetBSD, OpenBSD and
OS/2.
--norenice
Do not renice to -20 (default).
-S Y|N
--realtime Y|N
Reschedule mikmod to gain real-time priority (and thus more CPU
time). DANGEROUS! USE WITH CAUTION! This option is only avail‐
able under FreeBSD, Linux and OS/2.
--norealtime
Do not reschedule MikMod to gain real-time priority (default).
DISPLAY OPTIONS-q
--quiet
Quiet mode. Disables interactive commands and displays only
errors.
-te
--terse
Terse display like MikMod 2, i.e. without the information pan‐
els.
INFORMATION OPTIONS-n
--information
Display the list of the known drivers and module loaders.
-V
--version
Display MikMod version.
-h
--help Display a summary of the options.
CONFIGURATION OPTION--norc Do not parse the $HOME/.mikmodrc configuration file. This file
contains your default settings, so that you don't have to spec‐
ify them each time you run MikMod. The file is read when you run
MikMod and updated on exit. Using this option prevents MikMod
from accessing this file.
RUNTIME COMMANDS
At play time, the following keystrokes offer control over MikMod:
H, function key F1
Display help panel.
S, function key F2
Display samples panel.
I, function key F3
Display instruments panel (if present in the module).
M, function key F4
Display song message panel (if present in the module).
L, function key F5
Display the playlist panel.
C, function key F6
Display the configuration panel.
digits Set volume from 10% (digit 1) to 100% (digit 0).
< Decrease volume.
> Increase volume.
-, Left
Restart current pattern / skip to previous pattern.
+, Right
Skip to next pattern in current module.
Up, Down
Scroll panel.
PgUp, PgDown
Scroll panel (faster).
Home Go on top of the panel.
End Go to the end of the panel.
( Decrease speed variable (module plays faster).
) Increase speed variable (module plays slower).
{ Decrease tempo variable (module plays slower).
} Increase tempo variable (module plays faster).
: or ; Toggle interpolation mixing.
U Toggle surround mixing.
Q Exit MikMod.
P Switch to previous module in playlist.
N Switch to next module in playlist.
R Restart current module.
space Toggle pause.
Control-L
Refresh the screen.
MENU BASICS
Some functions of MikMod are available through menus, in the playlist
and configuration panels.
You can select commands in the menus either by moving the selection
with the arrow keys and pressing enter, or entering the highlighted
letter corresponding ot the command you want to select.
Menu entries ending with a > character open a submenu, whereas entries
ending in ... open a dialog box. You can dismiss a submenu either by
choosing a command in this menu, or using the left arrow key to go
back, or switching panels.
In dialog boxes, you can move the focus from the input line to the Ok
and Cancel buttons either with the "tab" key, or the up and down arrow
keys.
Also, if the statusbar is active (which is the default behaviour), it
will contain a short help text describing the menu option currently
highlighted.
PLAYLIST MENU
When the playlist panel is displayed, pressing the return key will
popup a menu. The menu commands are:
Play Continue list playback from the currently highlighted module.
Remove Remove module from the playlist.
Delete...
Remove module from the playlist, and delete module file on disk,
or whole archive if the module is stored in an archive file.
This function asks you to confirm your choice.
File > This entry opens a submenu with four commands, "Load", "Insert",
"Save" and "Save as". The Load and Insert commands ask you for a
filename, and replace the playlist with it (load) or merge it
with the playlist (insert). No wildcards are allowed. The Save
and Save as commands save the current playlist in a file, by
default ``playlist.mpl'', in the current directory. Note that
playlist filenames should end in .mpl, or they won't be loaded
by MikMod.
Shuffle
Randomize the playlist.
Sort > This entry opens a submenu with sort commands. You can select a
normal or reverse order, and then sort the playlist with one of
the four criteria: by name, by extension, by path or by time.
Back Discards the menu.
CONFIGURATION PANEL
The configuration panel lets you customize your MikMod settings, and
save them. You can also try some particular settings without losing
your previous configuration.
Output options
This section lets you choose various vital playback settings,
such as the output driver, the stereo/mono and 16/8 bit output
settings, the playback frequency, and the software mixer set‐
tings.
Playback options
This section lets you choose various module playback settings,
such as the output volume, the processing of panning effects and
bacwards loops, etc.
Other options
This section lets you choose the remaining settings, such as the
playlist mode, and various program settings.
Use config
This command activates the current configuration settings, but
does not save them.
Save config
This command saves and activates the current configuration set‐
tings.
Revert config
This command reverts to the on-disk configuration file settings.
MODULE FORMATS
MikMod will currently play the following common and not so common for‐
mats:
669 Composer 669 and Extended 669 modules.
AMF DSMI internal module format (Advanced Module Format, converted
with M2AMF).
DSM DSIK's internal module format.
FAR Farandole composer modules.
GDM General Digital Munsic internal module format (converted with
2GDM).
IMF Imago Orpheus modules.
IT Impulse Tracker modules.
MED Amiga MED modules, but synthsounds are not supported.
MOD Protracker, Startracker, Fasttracker, Oktalyzer, and Taketracker
modules.
MTM Multitracker module editor modules.
S3M Screamtracker version 3 modules.
STM Screamtracker version 2 modules.
STX STMIK converted modules.
ULT Ultratracker modules.
UNI, APUN
Old MikMod (UNI) and APlayer (APUN) internal module format.
XM Fasttracker 2 modules.
ARCHIVE FORMATS
MikMod should recognize and extract the following common archive for‐
mats. However, to use each of these you will need to find the appro‐
priate program(s) for MikMod to use to extract them. These are commonly
available and you will most likely find them with this distribution of
MikMod.
zip Info-zip or PkZip archives, commonly used on DOS/Windows plat‐
forms.
lha, lzh
Lharc archives, commonly used on the Amiga.
zoo Zoo archives, quite rare those days...
rar Rar archives.
gz Gzip compressed files.
bz2 Bzip2 compressed files.
tar, tar.gz and tar.bz2
Tar archives, even compressed with gzip or bzip2.
FILES
$HOME/.mikmodrc (or MikMod.cfg under OS/2)
User configuration settings, can also contain a default
playlist.
playlist.mpl
Default playlist filename.
AUTHORS
MikMod is the result of the work of many people, including: Jean-Paul
Mikkers, Jake Stine, Miodrag Vallat, Frank Loemker, Steve McIntyre,
Peter Amstutz, "MenTaLguY", Dimitri Boldyrev, Shlomi Fish, Stefan
Tibus, Tinic Urou. A full list of people having worked on libmikmod
and MikMod is displayed when MikMod starts.
LOCATING NEWER VERSIONS...
The official MikMod and libmikmod home page is located on
http://mikmod.darkorb.net An European mirror is at:
http://www.multimania.com/miodrag/mikmod
New releases can also be found on the official ftp site
ftp://mikmod.darkorb.net and after a short delay on metalab (formerly
known as sunsite) and its mirrors
ftp://metalab.unc.edu/pub/Linux/apps/sound/players and on hobbes, in
source and OS/2 binary forms
ftp://hobbes.nmsu.edu/pub/os2/mmedia
Version 3.1.6, 5th July 1999 MIKMOD(1)
