MK.CONF(5) BSD File Formats Manual MK.CONF(5)NAMEmk.conf — make configuration file
DESCRIPTION
The mk.conf file overrides various parameters used during the build of
the system.
Listed below are the mk.conf variables that may be set, the values to
which each may be set, a brief description of what each variable does,
and a reference to relevant manual pages.
NetBSD System variables
NETBSDSRCDIR The path to the top level of the NetBSD sources. If
make(1) is run from within the NetBSD source tree, the
default is the top level of that tree (as determined by
the presence of build.sh and tools/), otherwise BSDSRCDIR
will be used.
BSDOBJDIR The real path to the ‘obj’ tree for the NetBSD source
tree.
Default: /usr/obj
BSDSRCDIR The real path to the NetBSD source tree.
Default: /usr/src
BUILD If defined, ‘make install’ checks that the targets in the
source directories are up-to-date and re-makes them if
they are out of date, instead of blindly trying to install
out of date or non-existent targets.
Default: Unset.
BUILDID Identifier for the build. The identifier will be appended
to object directory names, and can be consulted in the
make(1) configuration file in order to set additional
build parameters, such as compiler flags.
Default: Unset.
COPTS Extra options for the C compiler. Should be appended to
(e.g., COPTS+=-g), rather than explicitly set. Note that
CPUFLAGS, not COPTS, should be used for compiler flags
that select CPU-related options. Also note that CFLAGS
should never be set in mk.conf.
CPUFLAGS Additional flags passed to the compiler/assembler to
select CPU instruction set options, CPU tuning options,
etc. Such options should not be specified in COPTS,
because some parts of the build process need to override
CPU-related compiler options.
DESTDIR Directory to contain the built NetBSD system. If set,
special options are passed to the compilation tools to
prevent their default use of the host system's
/usr/include, /usr/lib, and so forth. This pathname
should not end with a slash (/) character (for
installation into the system's root directory, set DESTDIR
to an empty string). The directory must reside on a file
system which supports long file names and hard links.
Default: Empty string if USETOOLS is “yes”; unset
otherwise.
Note: build.sh will provide a default of destdir.MACHINE
(in the top-level .OBJDIR) unless run in ‘expert’ mode
MAKEVERBOSE Level of verbosity of status messages. Supported values:
0 No descriptive messages or commands executed by
make(1) are shown.
1 Brief messages are shown describing what is being
done, but the actual commands executed by make(1) are
not displayed.
2 Descriptive messages are shown as above (prefixed
with a ‘#’), and ordinary commands performed by
make(1) are displayed.
3 In addition to the above, all commands performed by
make(1) are displayed, even if they would ordinarily
have been hidden through use of the “@” prefix in the
relevant makefile.
4 In addition to the above, commands executed by
make(1) are traced through use of the sh(1) “-x”
flag.
Default: 2
MKATF Can be set to “yes” or “no”. Indicates whether the
Automated Testing Framework is built and installed.
Default: “yes”
MKBINUTILS Can be set to “yes” or “no”. Indicates whether any of the
binutils tools or libraries should be built. That is, the
libraries libbfd, libiberty, or any of the things that
depend upon them, e.g. as(1), ld(1), dbsym(8), or
mdsetimage(8).
Default: “yes”
MKCATPAGES Can be set to “yes” or “no”. Indicates whether
preformatted plaintext manual pages will be created and
installed.
Default: “yes”
MKCOMPLEX Can be set to “yes” or “no”. Indicates whether the Math
Library (libm, -lm) is compiled with support for
<complex.h>.
Default: “yes”
MKCRYPTO Can be set to “yes” or “no”. Indicates whether
cryptographic code will be included in a build; provided
for the benefit of countries that do not allow strong
cryptography. Will not affect use of the standard low-
security password encryption system, crypt(3).
Default: “yes”
If “no”, acts as MKKERBEROS=no.
MKCRYPTO_RC5 Can be set to “yes” or “no”. Indicates whether RC5
support will be built into libcrypto_rc5.a.
Default: “no”
MKCVS Can be set to “yes” or “no”. Indicates whether cvs(1) is
built.
Default: “yes”
MKDEBUG Can be set to “yes” or “no”. Indicates whether separate
debugging symbols should be installed into
DESTDIR/usr/libdata/debug.
Default: “no”
MKDEBUGLIB Can be set to “yes” or “no”. Indicates whether debug
libraries (lib*_g.a) will be built and installed. Debug
libraries are compiled with “-g -DDEBUG”.
Default: “no”
MKDOC Can be set to “yes” or “no”. Indicates whether system
documentation destined for DESTDIR/usr/share/doc will be
installed.
Default: “yes”
MKDYNAMICROOT Can be set to “yes” or “no”. Indicates whether all
programs should be dynamically linked, and to install
shared libraries required by /bin and /sbin and the shared
linker ld.elf_so(1) into /lib. If ‘no’, link programs in
/bin and /sbin statically.
Default: “yes”
MKGCC Can be set to “yes” or “no”. Indicates whether gcc(1) or
any related libraries (libg2c, libgcc, libobjc, libstdc++)
are built.
Default: “yes”
MKGCCCMDS Can be set to “yes” or “no”. Indicates whether gcc(1) is
built. If “no”, then MKGCC controls if the GCC libraries
are built.
Default: “yes”
MKGDB Can be set to “yes” or “no”. Indicates whether gdb(1) is
built.
Default: “yes”
MKHESIOD Can be set to “yes” or “no”. Indicates whether the Hesiod
infrastructure (libraries and support programs) is built
and installed.
Default: “yes”
MKHOSTOBJ Can be set to “yes” or “no”. If set to “yes”, then for
programs intended to be run on the compile host, the name,
release, and architecture of the host operating system
will be suffixed to the name of the object directory
created by “make obj”. (This allows multiple host systems
to compile NetBSD for a single target.) If set to “no”,
then programs built to be run on the compile host will use
the same object directory names as programs built to be
run on the target.
Default: “no”
MKHTML Can be set to “yes” or “no”. Indicates whether the HTML
manual pages are created and installed.
Default: “yes”
MKIEEEFP Can be set to “yes” or “no”. Indicates whether code for
IEEE754/IEC60559 conformance is built. Has no effect on
most platforms.
Default: “yes”
MKINET6 Indicates whether INET6 (IPv6) infrastructure (libraries
and support programs) is built and installed.
Default: “yes”
MKINFO Can be set to “yes” or “no”. Indicates whether GNU Info
files, used for the documentation for most of the
compilation tools, will be built and installed.
Default: “yes”
MKIPFILTER Can be set to “yes” or “no”. Indicates whether the ipf(4)
programs, headers and other components will be built and
installed.
Default: “yes”
MKISCSI Can be set to “yes” or “no”. Indicates whether the iSCSI
library and applications are built and installed.
Default: “yes”
MKKERBEROS Can be set to “yes” or “no”. Indicates whether the
Kerberos v5 infrastructure (libraries and support
programs) is built and installed. Caution: the default
pam(8) configuration requires that Kerberos be present
even if not used. Do not install a userland without
Kerberos without also either updating the pam.conf(5)
files or disabling PAM via MKPAM. Otherwise all logins
will fail.
Default: “yes”
MKKMOD Can be set to “yes” or “no”. Indicates whether kernel
modules are built and installed.
Default: “yes”
MKLDAP Can be set to “yes” or “no”. Indicates whether the
Lightweight Directory Access Protocol (LDAP)
infrastructure (libraries and support programs) is built
and installed.
Default: “yes”
MKLINKLIB Can be set to “yes” or “no”. Indicates whether all of the
shared library infrastructure is built. If ‘no’,
prevents: installation of the *.a libraries, installation
of the *_pic.a libraries on PIC systems, building of *.a
libraries on PIC systems, or installation of .so symlinks
on ELF systems.
Default: “yes”
If “no”, acts as MKPICINSTALL=no MKPROFILE=no.
MKLINT Can be set to “yes” or “no”. Indicates whether lint(1)
will be run against portions of the NetBSD source code
during the build, and whether lint libraries will be
installed into DESTDIR/usr/libdata/lint.
Default: “yes”
MKMAN Can be set to “yes” or “no”. Indicates whether manual
pages will be installed.
Default: “yes”
If “no”, acts as MKCATPAGES=no MKHTML=no.
MKMANZ Can be set to “yes” or “no”. Indicates whether manual
pages should be compressed with gzip(1) at installation
time.
Default: “no”
MKMDNS Can be set to “yes” or “no”. Indicates whether the mDNS
(Multicast DNS) infrastructure (libraries and support
programs) is built and installed.
Default: “yes”
MKNLS Can be set to “yes” or “no”. Indicates whether Native
Language System (NLS) locale zone files will be built and
installed.
Default: “yes”
MKOBJ Can be set to “yes” or “no”. Indicates whether object
directories will be created when running “make obj”. If
set to “no”, then all built files will be located inside
the regular source tree.
Default: “yes”
If “no”, acts as MKOBJDIRS=no.
MKOBJDIRS Can be set to “yes” or “no”. Indicates whether object
directories will be created automatically (via a “make
obj” pass) at the start of a build.
Default: “no”
MKPAM Can be set to “yes” or “no”. Indicates whether the pam(8)
framework (libraries and support files) is built. The
pre-PAM code is not supported and may be removed in the
future.
Default: “yes”
MKPCC Can be set to “yes” or “no”. Indicates whether pcc(1) or
any related libraries (libpcc, libpccsoftfloat) are built.
Default: “no”
MKPF Can be set to “yes” or “no”. Indicates whether the pf(4)
programs, headers and LKM will be built and installed.
Default: “yes”
MKPIC Can be set to “yes” or “no”. Indicates whether shared
objects and libraries will be created and installed. If
set to “no”, the entire built system will be statically
linked.
Default: Platform dependent. As of this writing, all
platforms except m68000 and sh3 default to “yes”.
If “no”, acts as MKPICLIB=no.
MKPICINSTALL Can be set to “yes” or “no”. Indicates whether the ar(1)
format libraries (lib*_pic.a), used to generate shared
libraries, are installed.
Default: “yes”
MKPICLIB Can be set to “yes” or “no”. Indicates whether the ar(1)
format libraries (lib*_pic.a), used to generate shared
libraries.
Default: “yes”
MKPIE Indicates whether Position Independent Executables (PIE)
are built and installed.
Default: “no”
MKPOSTFIX Can be set to “yes” or “no”. Indicates whether Postfix is
built.
Default: “yes”
MKPROFILE Can be set to “yes” or “no”. Indicates whether profiled
libraries (lib*_p.a) will be built and installed.
Default: “yes”; however, some platforms turn off MKPROFILE
by default at times due to toolchain problems with
profiled code.
MKSHARE Can be set to “yes” or “no”. Indicates whether files
destined to reside in DESTDIR/usr/share will be built and
installed.
Default: “yes”
If “no”, acts as MKCATPAGES=no MKDOC=no MKINFO=no
MKHTML=no MKMAN=no MKNLS=no.
MKSKEY Can be set to “yes” or “no”. Indicates whether the S/key
infrastructure (libraries and support programs) is built.
Default: “yes”
MKSOFTFLOAT Can be set to “yes” or “no”. Indicates whether the
compiler generates output containing library calls for
floating point and possibly soft-float library support.
Default: “no”
MKSTATICLIB Can be set to “yes” or “no”. Indicates whether the normal
static libraries (lib*_g.a) will be built and installed.
Default: “yes”
MKSTRIPIDENT Can be set to “yes” or “no”. Indicates whether program
binaries and shared libraries should be built to include
RCS IDs for use with ident(1).
Default: “no”
MKUNPRIVED Can be set to “yes” or “no”. Indicates whether an
unprivileged install will occur. The user, group,
permissions, and file flags, will not be set on the
installed item; instead the information will be appended
to a file called METALOG in DESTDIR. The contents of
METALOG is used during the generation of the distribution
tar files to ensure that the appropriate file ownership is
stored.
Default: “no”
MKUPDATE Can be set to “yes” or “no”. Indicates whether all
install operations intended to write to DESTDIR will
compare file timestamps before installing, and skip the
install phase if the destination files are up-to-date.
This also has implications on full builds (see next
subsection).
Default: “no”
MKX11 Can be set to “yes” or “no”. Indicates whether X11 is
built and installed (by descending into src/x11 or
src/external/mit/xorg depending on the value of
X11FLAVOUR).
Default: “no”
MKYP Can be set to “yes” or “no”. Indicates whether the YP
(NIS) infrastructure (libraries and support programs) is
built.
Default: “yes”
OBJMACHINE If defined, creates objdirs of the form obj.MACHINE, where
MACHINE is the current architecture (as per ‘uname -m’).
RELEASEDIR If set, specifies the directory to which a release(7)
layout will be written at the end of a “make release”.
Default: Unset.
Note: build.sh will provide a default of releasedir (in
the top-level .OBJDIR) unless run in ‘expert’ mode
TOOLDIR Directory to hold the host tools, once built. This
directory should be unique to a given host system and
NetBSD source tree. (However, multiple targets may share
the same TOOLDIR; the target-dependent files have unique
names.) If unset, a default based on the uname(1)
information of the host platform will be created in the
.OBJDIR of src.
Default: Unset.
USE_FORT Indicates whether the so-called “FORTIFY_SOURCE”
security(7) extensions are enabled; see ssp(3) for
details. This imposes some performance penalty.
Default: “no”
USE_HESIOD Can be set to “yes” or “no”. Indicates whether Hesiod
support is enabled in the various applications that
support it. If MKHESIOD=no, USE_HESIOD will also be
forced to “no”.
Default: “yes”
USE_INET6 Can be set to “yes” or “no”. Indicates whether INET6
(IPv6) support is enabled in the various applications that
support it. If MKINET6=no, USE_INET6 will also be forced
to “no”.
Default: “yes”
USE_JEMALLOC Can be set to “yes” or “no”. Indicates whether the
jemalloc allocator (which is designed for improved
performance with threaded applications) is used instead of
the phkmalloc allocator (that was the default until
NetBSD 5.0).
Default: “yes”
USE_KERBEROS Can be set to “yes” or “no”. Indicates whether Kerberos
v5 support is enabled in the various applications that
support it. If MKKERBEROS=no, USE_KERBEROS will also be
forced to “no”.
Default: “yes”
USE_LDAP Can be set to “yes” or “no”. Indicates whether LDAP
support is enabled in the various applications that
support it. If MKLDAP=no, USE_LDAP will also be forced to
“no”.
Default: “yes”
USE_PAM Can be set to “yes” or “no”. Indicates whether pam(8)
support is enabled in the various applications that
support it. If MKPAM=no, USE_PAM will also be forced to
“no”.
Default: “yes”
USE_SKEY Can be set to “yes” or “no”. Indicates whether S/key
support is enabled in the various applications that
support it. If MKSKEY=no, USE_SKEY will also be forced to
“no”.
Default: “yes”
This is mutually exclusive to USE_PAM!=no.
USE_SSP Can be set to “yes” or “no”. Indicates whether GCC stack-
smashing protection (SSP) support, which detects stack
overflows and aborts the program, is enabled. This
imposes some performance penalty.
Default: “no”
USE_YP Can be set to “yes” or “no”. Indicates whether YP (NIS)
support is enabled in the various applications that
support it. If MKYP=no, USE_YP will also be forced to
“no”.
Default: “yes”
USETOOLS Indicates whether the tools specified by TOOLDIR should be
used as part of a build in progress. Must be set to “yes”
if cross-compiling.
yes Use the tools from TOOLDIR.
no Do not use the tools from TOOLDIR, but refuse to
build native compilation tool components that are
version-specific for that tool.
never Do not use the tools from TOOLDIR, even when
building native tool components. This is similar
to the traditional NetBSD build method, but does
not verify that the compilation tools in use are
up-to-date enough in order to build the tree
successfully. This may cause build or runtime
problems when building the whole NetBSD source
tree.
Default: “yes” if building all or part of a whole NetBSD
source tree (detected automatically); “no” otherwise (to
preserve traditional semantics of the ⟨bsd.*.mk⟩ make(1)
include files).
X11FLAVOUR Picks which X11 distribution to cross-build with NetBSD.
Set to either “Xorg” or “XFree86”. Only relevant if
MKX11!=no.
Default: “Xorg” on alpha, i386, macppc, shark and sparc64
platforms. “XFree86” on everything else.
pkgsrc system variables
Please see the pkgsrc guide at
http://www.netbsd.org/Documentation/pkgsrc/ or pkgsrc/doc/pkgsrc.txt for
more variables used internally by the package system and
${PKGSRCDIR}/mk/defaults/mk.conf for package-specific examples.
FILES
/etc/mk.conf This file.
${PKGSRCDIR}/mk/defaults/mk.conf
Examples for settings regarding the pkgsrc collection.
SEE ALSOmake(1), /usr/share/mk/bsd.README, pkgsrc/doc/pkgsrc.txt,
http://www.netbsd.org/Documentation/pkgsrc/
HISTORY
The mk.conf file appeared in NetBSD 1.2.
BSD November 6, 2011 BSD
