mount_unionfs man page on PC-BSD

Man page or keyword search:  
man Server   9747 pages
apropos Keyword Search (all sections)
Output format
PC-BSD logo
[printable version]

MOUNT_UNIONFS(8)	  BSD System Manager's Manual	      MOUNT_UNIONFS(8)

NAME
     mount_unionfs — mount union file systems

SYNOPSIS
     mount_unionfs [-br] [-o options] directory uniondir

DESCRIPTION
     The mount_unionfs utility attaches directory above uniondir in such a way
     that the contents of both directory trees remain visible.	By default,
     directory becomes the upper layer and uniondir becomes the lower layer.

     The options are as follows:

     -b	     Deprecated.  Use -o below instead.

     -o	     Options are specified with the -o flag followed by an option.
	     The following options are available:

	     below   Inverts the default position, so that directory becomes
		     the lower layer and uniondir becomes the upper layer.
		     However, uniondir remains the mount point.

	     copymode=traditional|transparent|masquerade
		     Specifies the way to create a file or a directory in the
		     upper layer automatically when needed.  The traditional
		     mode uses the same way as the old unionfs for backward
		     compatibility, and transparent duplicates the file and
		     directory mode bits and the ownership in the lower layer
		     to the created file in the upper layer.  For behavior of
		     the masquerade mode, see MASQUERADE MODE below.

	     whiteout=always|whenneeded
		     Specifies whether whiteouts should always be made in the
		     upper layer when removing a file or directory or only
		     when it already exists in the lower layer.

	     udir=mode
		     Specifies directory mode bits in octal for masquerade
		     mode.

	     ufile=mode
		     Specifies file mode bits in octal for masquerade mode.

	     gid=gid
		     Specifies group for masquerade mode.

	     uid=uid
		     Specifies user for masquerade mode.

     To enforce file system security, the user mounting a file system must be
     superuser or else have write permission on the mounted-on directory.  In
     addition, the vfs.usermount sysctl(8) variable must be set to 1 to permit
     file system mounting by ordinary users.  However, note that transparent
     and masquerade modes require vfs.usermount to be set to 0 because this
     functionality can only be used by superusers.

     Filenames are looked up in the upper layer and then in the lower layer.
     If a directory is found in the lower layer, and there is no entry in the
     upper layer, then a shadow directory will be created in the upper layer.
     The ownership and the mode bits are set depending on the copymode option.
     In traditional mode, it will be owned by the user who originally did the
     union mount, with mode 0777 (“rwxrwxrwx”) modified by the umask in effect
     at that time.

     If a file exists in the upper layer then there is no way to access a file
     with the same name in the lower layer.  If necessary, a combination of
     loopback and union mounts can be made which will still allow the lower
     files to be accessed by a different pathname.

     Except in the case of a directory, access to an object is granted via the
     normal file system access checks.	For directories, the current user must
     have access to both the upper and lower directories (should they both
     exist).

     Requests to create or modify objects in uniondir are passed to the upper
     layer with the exception of a few special cases.  An attempt to open for
     writing a file which exists in the lower layer causes a copy of the
     entire file to be made to the upper layer, and then for the upper layer
     copy to be opened.	 Similarly, an attempt to truncate a lower layer file
     to zero length causes an empty file to be created in the upper layer.
     Any other operation which would ultimately require modification to the
     lower layer fails with EROFS.

     The union file system manipulates the namespace, rather than individual
     file systems.  The union operation applies recursively down the directory
     tree now rooted at uniondir.  Thus any file systems which are mounted
     under uniondir will take part in the union operation.  This differs from
     the union option to mount(8) which only applies the union operation to
     the mount point itself, and then only for lookups.

MASQUERADE MODE
     When a file (or a directory) is created in the upper layer, the
     masquerade mode sets it the fixed access mode bits given in ufile (for
     files) or udir (for directories) option and the owner given in udir and
     gid options, instead of ones in the lower layer.  Note that in the
     masquerade mode and when owner of the file or directory matches one spec‐
     ified in uid option, only mode bits for the owner will be modified.  More
     specifically, the file mode bits in the upper layer will be (mode in the
     lower layer) OR (mode given in ufile AND 0700), and the ownership will be
     the same as one in the lower layer.

     The default values for ufile, udir, uid, and gid are as follow:

     ·	 If none of ufile and udir were specified, access mode bits in the
	 mount point will be used.
     ·	 If none of uid and gid were specified, ownership in the mount point
	 will be used.
     ·	 If one of udir or ufile is not specified, the value of the other
	 option will be used.
     ·	 If one of uid or gid is not specified, the value of the other option
	 will be used.

EXAMPLES
     The commands

	   mount -t cd9660 -o ro /dev/cd0 /usr/src
	   mount -t unionfs -o noatime /var/obj /usr/src

     mount the CD-ROM drive /dev/cd0 on /usr/src and then attaches /var/obj on
     top.  For most purposes the effect of this is to make the source tree
     appear writable even though it is stored on a CD-ROM.  The -o noatime
     option is useful to avoid unnecessary copying from the lower to the upper
     layer.

     The commands

	   mount -t cd9660 -o ro /dev/cd0 /usr/src
	   chown 2020 /usr/src
	   mount -t unionfs -o noatime -o copymode=masquerade -o uid=builder \
	       -o udir=755 -o ufile=644 /var/obj /usr/src

     also mount the CD-ROM drive /dev/cd0 on /usr/src and then attaches
     /var/obj on top.  Furthermore, the owner of all files and directories in
     /usr/src is a regular user with UID 2020 when seen from the upper layer.
     Note that for the access mode bits, ones in the lower layer (on the CD-
     ROM, in this example) are still used without change.  Thus, write privi‐
     lege to the upper layer can be controlled independently from access mode
     bits and ownership in the lower layer.  If a user does not have read
     privilege from the lower layer, one cannot still read even when the upper
     layer is mounted by using masquerade mode.

     The command

	   mount -t unionfs -o noatime -o below /sys $HOME/sys

     attaches the system source tree below the sys directory in the user's
     home directory.  This allows individual users to make private changes to
     the source, and build new kernels, without those changes becoming visible
     to other users.  Note that the files in the lower layer remain accessible
     via /sys.

SEE ALSO
     intro(2), mount(2), unmount(2), fstab(5), mount(8), mount_nullfs(8)

HISTORY
     The mount_unionfs utility first appeared in 4.4BSD.

     The -r option for hiding the lower layer completely was removed in
     FreeBSD 7.0 because this is identical to using mount_nullfs(8).

AUTHORS
     In FreeBSD 7.0, Masanori OZAWA ⟨ozawa@ongs.co.jp⟩ reimplemented handling
     of locking, whiteout, and file mode bits, and Hiroki Sato
     ⟨hrs@FreeBSD.org⟩ wrote about the changes in this manual page.

BUGS
     THIS FILE SYSTEM TYPE IS NOT YET FULLY SUPPORTED (READ: IT DOESN'T WORK)
     AND USING IT MAY, IN FACT, DESTROY DATA ON YOUR SYSTEM.  USE AT YOUR OWN
     RISK.  BEWARE OF DOG.  SLIPPERY WHEN WET.

     This code also needs an owner in order to be less dangerous - serious
     hackers can apply by sending mail to ⟨freebsd-fs@FreeBSD.org⟩ and
     announcing their intent to take it over.

     Without whiteout support from the file system backing the upper layer,
     there is no way that delete and rename operations on lower layer objects
     can be done.  EROFS is returned for this kind of operations along with
     any others which would make modifications to the lower layer, such as
     chmod(1).

     Running find(1) over a union tree has the side-effect of creating a tree
     of shadow directories in the upper layer.

     The current implementation does not support copying extended attributes
     for acl(9), mac(9), or so on to the upper layer.  Note that this may be a
     security issue.

     A shadow directory, which is one automatically created in the upper layer
     when it exists in the lower layer and does not exist in the upper layer,
     is always created with the superuser privilege.  However, a file copied
     from the lower layer in the same way is created by the user who accessed
     it.  Because of this, if the user is not the superuser, even in
     transparent mode the access mode bits in the copied file in the upper
     layer will not always be the same as ones in the lower layer.  This
     behavior should be fixed.

BSD			       November 30, 2006			   BSD
[top]

List of man pages available for PC-BSD

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net