MYSQLBINLOG(1) MySQL Database System MYSQLBINLOG(1)NAMEmysqlbinlog - utility for processing binary log files
SYNOPSISmysqlbinlog [options] log_file ...
The binary log files that the server generates are written in binary
format. To examine these files in text format, use the mysqlbinlog
utility. It is available as of MySQL 3.23.14. You can also use
mysqlbinlog to read relay log files written by a slave server in a
replication setup. Relay logs have the same format as binary log files.
Invoke mysqlbinlog like this:
shell> mysqlbinlog [options] log_file ...
For example, to display the contents of the binary log file named
binlog.000003, use this command:
shell> mysqlbinlog binlog.0000003
The output includes all events contained in binlog.000003. Event
information includes the statement executed, the time the statement
took, the thread ID of the client that issued it, the timestamp when it
was executed, and so forth.
The output from mysqlbinlog can be re-executed (for example, by using
it as input to mysql) to reapply the statements in the log. This is
useful for recovery operations after a server crash. For other usage
examples, see the discussion later in this section.
Normally, you use mysqlbinlog to read binary log files directly and
apply them to the local MySQL server. It is also possible to read
binary logs from a remote server by using the --read-from-remote-server
option. When you read remote binary logs, the connection parameter
options can be given to indicate how to connect to the server. These
options are --host, --password, --port, --protocol, --socket, and
--user; they are ignored except when you also use the
Binary logs and relay logs are discussed further in Section 10.4, “The
Binary Log”, and Section 3.4, “Replication Relay and Status Files”.
mysqlbinlog supports the following options:
· --help, -?
Display a help message and exit.
The directory where character sets are installed. See Section 9.1,
“The Character Set Used for Data and Sorting”.
· --database=db_name, -d db_name
List entries for just this database (local log only). You can only
specify one database with this option - if you specify multiple
--database options, only the last one is used. This option forces
mysqlbinlog to output entries from the binary log where the default
database (that is, the one selected by USE) is db_name. Note that
this does not replicate cross-database statements such as UPDATE
some_db.some_table SET foo='bar' while having selected a different
database or no database.
· --debug[=debug_options], -# [debug_options]
Write a debugging log. A typical debug_options string is often
· --disable-log-bin, -D
Disable binary logging. This is useful for avoiding an endless loop
if you use the --to-last-log option and are sending the output to
the same MySQL server. This option also is useful when restoring
after a crash to avoid duplication of the statements you have
logged. This option is available as of MySQL 4.1.8.
This option requires that you have the SUPER privilege. It causes
mysqlbinlog to include a SET SQL_LOG_BIN=0 statement in its output
to disable binary logging of the remaining output. The SET statement
is ineffective unless you have the SUPER privilege.
· --force-read, -f
With this option, if mysqlbinlog reads a binary log event that it
does not recognize, it prints a warning, ignores the event, and
continues. Without this option, mysqlbinlog stops if it reads such
· --host=host_name, -h host_name
Get the binary log from the MySQL server on the given host.
· --local-load=path, -l path
Prepare local temporary files for LOAD DATA INFILE in the specified
· --offset=N, -o N
Skip the first N entries in the log.
· --password[=password], -p[password]
The password to use when connecting to the server. If you use the
short option form (-p), you cannot have a space between the option
and the password. If you omit the password value following the
--password or -p option on the command line, you are prompted for
Specifying a password on the command line should be considered
insecure. See Section 7.6, “Keeping Your Password Secure”.
· --port=port_num, -P port_num
The TCP/IP port number to use for connecting to a remote server.
· --position=N, -j N
Deprecated. Use --start-position instead (starting from MySQL
The connection protocol to use. Added in MySQL 4.1.
· --read-from-remote-server, -R
Read the binary log from a MySQL server rather than reading a local
log file. Any connection parameter options are ignored unless this
option is given as well. These options are --host, --password,
--port, --protocol, --socket, and --user.
· --result-file=name, -r name
Direct output to the given file.
Add a SET NAMES charset_name statement to the output to specify the
character set to be used for processing log files. This option was
added in MySQL 4.1.21.
· --short-form, -s
Display only the statements contained in the log, without any extra
· --socket=path, -S path
For connections to localhost, the Unix socket file to use, or, on
Windows, the name of the named pipe to use.
Start reading the binary log at the first event having a timestamp
equal to or later than the datetime argument. The datetime value is
relative to the local time zone on the machine where you run
mysqlbinlog. The value should be in a format accepted for the
DATETIME or TIMESTAMP data types. For example:
shell> mysqlbinlog --start-datetime="2005-12-25 11:25:56" binlog.000003
This option is available as of MySQL 4.1.4. It is useful for
point-in-time recovery. See Section 8.2, “Example Backup and Recovery
Stop reading the binary log at the first event having a timestamp
equal or posterior to the datetime argument. This option is useful
for point-in-time recovery. See the description of the
--start-datetime option for information about the datetime value.
This option is available as of MySQL 4.1.4.
Start reading the binary log at the first event having a position
equal to the N argument. This option applies to the first log file
named on the command line. Available as of MySQL 4.1.4 (previously
Stop reading the binary log at the first event having a position
equal or greater than the N argument. This option applies to the
last log file named on the command line. Available as of MySQL
· --to-last-log, -t
Do not stop at the end of the requested binary log from a MySQL
server, but rather continue printing until the end of the last
binary log. If you send the output to the same MySQL server, this
may lead to an endless loop. This option requires
--read-from-remote-server. Available as of MySQL 4.1.2.
· --user=user_name, -u user_name
The MySQL username to use when connecting to a remote server.
· --version, -V
Display version information and exit.
You can also set the following variable by using --var_name=value
Specify the number of open file descriptors to reserve.
It is also possible to set variables by using
--set-variable=var_name=value or -O var_name=value syntax. This syntax
You can pipe the output of mysqlbinlog into the mysql client to execute
the statements contained in the binary log. This is used to recover
from a crash when you have an old backup (see Section 8.1, “Database
Backups”). For example:
shell> mysqlbinlog binlog.000001 | mysql
shell> mysqlbinlog binlog.[0-9]* | mysql
You can also redirect the output of mysqlbinlog to a text file instead,
if you need to modify the statement log first (for example, to remove
statements that you do not want to execute for some reason). After
editing the file, execute the statements that it contains by using it
as input to the mysql program.
mysqlbinlog has the --start-position option, which prints only those
statements with an offset in the binary log greater than or equal to a
given position (the given position must match the start of one event).
It also has options to stop and start when it sees an event with a
given date and time. This enables you to perform point-in-time recovery
using the --stop-datetime option (to be able to say, for example, “roll
forward my databases to how they were today at 10:30 a.m.”).
If you have more than one binary log to execute on the MySQL server,
the safe method is to process them all using a single connection to the
server. Here is an example that demonstrates what may be unsafe:
shell> mysqlbinlog binlog.000001 | mysql # DANGER!!
shell> mysqlbinlog binlog.000002 | mysql # DANGER!!
Processing binary logs this way using different connections to the
server causes problems if the first log file contains a CREATE
TEMPORARY TABLE statement and the second log contains a statement that
uses the temporary table. When the first mysql process terminates, the
server drops the temporary table. When the second mysql process
attempts to use the table, the server reports “unknown table.”
To avoid problems like this, use a single connection to execute the
contents of all binary logs that you want to process. Here is one way
to do so:
shell> mysqlbinlog binlog.000001 binlog.000002 | mysql
Another approach is to write all the logs to a single file and then
process the file:
shell> mysqlbinlog binlog.000001 > /tmp/statements.sql
shell> mysqlbinlog binlog.000002 >> /tmp/statements.sql
shell> mysql -e "source /tmp/statements.sql"
In MySQL 3.23, the binary log did not contain the data to load for LOAD
DATA INFILE statements. To execute such a statement from a binary log
file, the original data file was needed. Starting from MySQL 4.0.14,
the binary log does contain the data, so mysqlbinlog can produce output
that reproduces the LOAD DATA INFILE operation without the original
data file. mysqlbinlog copies the data to a temporary file and writes
a LOAD DATA LOCAL INFILE statement that refers to the file. The default
location of the directory where these files are written is
system-specific. To specify a directory explicitly, use the
Because mysqlbinlog converts LOAD DATA INFILE statements to LOAD DATA
LOCAL INFILE statements (that is, it adds LOCAL), both the client and
the server that you use to process the statements must be configured to
allow LOCAL capability. See Section 5.4, “Security Issues with LOAD
Warning: The temporary files created for LOAD DATA LOCAL statements are
not automatically deleted because they are needed until you actually
execute those statements. You should delete the temporary files
yourself after you no longer need the statement log. The files can be
found in the temporary file directory and have names like
Before MySQL 4.1, mysqlbinlog could not prepare output suitable for
mysql if the binary log contained interlaced statements originating
from different clients that used temporary tables of the same name.
This is fixed in MySQL 4.1. However, the problem still existed for LOAD
DATA INFILE statements until it was fixed in MySQL 4.1.8.
Copyright 1997-2006 MySQL AB
This documentation is NOT distributed under a GPL license. Use of this
documentation is subject to the following terms: You may create a
printed copy of this documentation solely for your own personal use.
Conversion to other formats is allowed as long as the actual content is
not altered or edited in any way. You shall not publish or distribute
this documentation in any form or on any media, except if you
distribute the documentation in a manner similar to how MySQL
disseminates it (that is, electronically for download on a Web site
with the software) or on a CD-ROM or similar medium, provided however
that the documentation is disseminated together with the software on
the same medium. Any other use, such as any dissemination of printed
copies or use of this documentation, in whole or in part, in another
publication, requires the prior written consent from an authorized
representative of MySQL AB. MySQL AB reserves any and all rights to
this documentation not expressly granted above.
Please email <firstname.lastname@example.org> for more information.
SEE ALSOisamchk(1), isamlog(1), msql2mysql(1), myisam_ftdump(1), myisamchk(1),
myisamlog(1), myisampack(1), mysql(1), mysql.server(1),
mysql_config(1), mysql_explain_log(1), mysql_fix_privilege_tables(1),
mysql_zap(1), mysqlaccess(1), mysqladmin(1), mysqlcheck(1), mysqld(1),
mysqld(8), mysqld_multi(1), mysqld_safe(1), mysqldump(1),
mysqlhotcopy(1), mysqlimport(1), mysqlshow(1), pack_isam(1), perror(1),
For more information, please refer to the MySQL Reference Manual, which
may already be installed locally and which is also available online at
MySQL AB (http://www.mysql.com/). This software comes with no
MySQL 4.1 11/02/2006 MYSQLBINLOG(1)