ncv man page on FreeBSD

Man page or keyword search:  
man Server   9747 pages
apropos Keyword Search (all sections)
Output format
FreeBSD logo
[printable version]

NCV(4)			 BSD Kernel Interfaces Manual			NCV(4)

NAME
     ncv — NCR 53C500 based SCSI host adapter driver

SYNOPSIS
     To compile this driver into the kernel, place the following lines in your
     kernel configuration file:

	   device scbus
	   device ncv

     Alternatively, to load the driver as a module at boot time, place the
     following line in loader.conf(5):

	   ncv_load="YES"

DESCRIPTION
     The ncv driver provides access to the SCSI bus connected to an NCR 53C500
     based PC-Card SCSI host adapter or an Adaptec AHA-2920 on the PCI bus.

HARDWARE
     The following devices are currently supported by the ncv driver:

     ·	 I-O DATA PCSC-DV
     ·	 KME KXLC002 (TAXAN ICD-400PN, etc.), KXLC004, and UJDCD450
     ·	 Macnica Miracle SCSI-II mPS110
     ·	 Media Intelligent MSC-110, MSC-200
     ·	 NEC PC-9801N-J03R
     ·	 New Media Corporation BASICS SCSI
     ·	 Qlogic Fast SCSI
     ·	 RATOC REX-9530, REX-5572 (SCSI only)

DIAGNOSTICS
     The following error messages are sometimes returned:

     SCSI BUS RESET failed  Usually returned when a failure occurs during the
     bus reset.

     CMD_NOP failed  No operation or the operation has failed.

     CMD_NOP|CMD_DMA  A failure occurred during the DMA read/write operations.

     The ncv driver should return [ENODEV] when any of the previously noted
     failures occur.

SEE ALSO
     cardbus(4), cd(4), da(4), pccard(4), sa(4), scsi(4)

HISTORY
     The ncv device driver has been developed for NetBSD/pc98 and ported to
     FreeBSD.  The ncv driver first appeared in FreeBSD 2.2 with PAO and
     merged in FreeBSD 4.2.

AUTHORS
     The ncv driver was written by Naofumi Honda.  This manual page was writ‐
     ten by Tom Rhodes ⟨trhodes@FreeBSD.org⟩ and Noriaki Mitsunaga
     ⟨non@FreeBSD.org⟩.

BSD				August 10, 2004				   BSD
[top]

List of man pages available for FreeBSD

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
...................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net