norewind_close_disabled(5)norewind_close_disabled(5)NAMEnorewind_close_disabled - determine whether access to tape device spe‐
cial files without the no-rewind-on-close option is allowed
VALUES
Default
Allowed values
DESCRIPTION
Note: this tunable was named in releases prior to HP-UX 11i v3.
This tunable notifies the tape driver whether it should allow access to
device special files without the no-rewind-on-close option. When this
tunable is on, the tape driver will fail any open on a tape device spe‐
cial file that does not have the no-rewind-on-close option (that is, or
with a status of
The tunable allows the safe sharing of tape devices in SAN tape backup
solution configurations. The disabling of device special files without
no-rewind-on-close in a SAN tape backup solution configuration prevents
the accidental sending of a rewind command on close from HP-UX systems
via standard tape commands like which would corrupt a backup in
process.
Who Is Expected to Change This Tunable?
Anyone.
Restrictions on Changing
Changes to this tunable take effect immediately.
When Should the Tunable Be Turned On?
This tunable should be turned on if the system is going to be used in a
SAN tape backup solution configuration.
What Are the Side Effects of Turning the Tunable On?
The tape driver will fail any open to a tape device special file that
does not have the no-rewind-on-close option with a status of This
behavior prevents the usage of any tape device special file without the
no-rewind-on-close option.
When Should the Tunable Be Turned Off?
This tunable should be turned off if the system is not part of a SAN
tape backup solution configuration or the system utilizes will not
function unless it has access to device special files without the no-
rewind-on-close option.
What Are the Side Effects of Turning the Tunable Off?
A rewind may be issued accidentally from this system on close, possibly
corrupting a backup being issued from another system on the SAN.
What Other Tunables Should Be Changed at the Same Time?
None.
EXAMPLES
Query the current value of the tunable:
Set the value of the tunable to
To save the value of the tunable across reboots:
WARNINGS
All HP-UX kernel tunable parameters are release specific. This parame‐
ter may be removed or have its meaning changed in future releases of
HP-UX.
Installation of optional kernel software, from HP or other vendors, may
cause changes to tunable parameter values. After installation, some
tunable parameters may no longer be at the default or recommended val‐
ues. For information about the effects of installation on tunable val‐
ues, consult the documentation for the kernel software being installed.
For information about optional kernel software that was factory
installed on your system, see at
AUTHOR
was developed by Hewlett-Packard.
SEE ALSOscsi_tape(7), scsimgr_estape(7).
Tunable Kernel Parametersnorewind_close_disabled(5)