nsupdate man page on Hurd

Man page or keyword search:  
man Server   6387 pages
apropos Keyword Search (all sections)
Output format
Hurd logo
[printable version]

NSUPDATE(1)			     BIND9			   NSUPDATE(1)

NAME
       nsupdate - Dynamic DNS update utility

SYNOPSIS
       nsupdate [-d] [-D] [[-g] | [-o] | [-l] | [-y [hmac:]keyname:secret] |
		[-k keyfile]] [-t timeout] [-u udptimeout] [-r udpretries]
		[-R randomdev] [-v] [filename]

DESCRIPTION
       nsupdate is used to submit Dynamic DNS Update requests as defined in
       RFC 2136 to a name server. This allows resource records to be added or
       removed from a zone without manually editing the zone file. A single
       update request can contain requests to add or remove more than one
       resource record.

       Zones that are under dynamic control via nsupdate or a DHCP server
       should not be edited by hand. Manual edits could conflict with dynamic
       updates and cause data to be lost.

       The resource records that are dynamically added or removed with
       nsupdate have to be in the same zone. Requests are sent to the zone's
       master server. This is identified by the MNAME field of the zone's SOA
       record.

       The -d option makes nsupdate operate in debug mode. This provides
       tracing information about the update requests that are made and the
       replies received from the name server.

       The -D option makes nsupdate report additional debugging information to
       -d.

       The -L option with an integer argument of zero or higher sets the
       logging debug level. If zero, logging is disabled.

       Transaction signatures can be used to authenticate the Dynamic DNS
       updates. These use the TSIG resource record type described in RFC 2845
       or the SIG(0) record described in RFC 2535 and RFC 2931 or GSS-TSIG as
       described in RFC 3645. TSIG relies on a shared secret that should only
       be known to nsupdate and the name server. Currently, the only supported
       encryption algorithm for TSIG is HMAC-MD5, which is defined in RFC
       2104. Once other algorithms are defined for TSIG, applications will
       need to ensure they select the appropriate algorithm as well as the key
       when authenticating each other. For instance, suitable key and server
       statements would be added to /etc/named.conf so that the name server
       can associate the appropriate secret key and algorithm with the IP
       address of the client application that will be using TSIG
       authentication. SIG(0) uses public key cryptography. To use a SIG(0)
       key, the public key must be stored in a KEY record in a zone served by
       the name server.	 nsupdate does not read /etc/named.conf.

       GSS-TSIG uses Kerberos credentials. Standard GSS-TSIG mode is switched
       on with the -g flag. A non-standards-compliant variant of GSS-TSIG used
       by Windows 2000 can be switched on with the -o flag.

       nsupdate uses the -y or -k option to provide the shared secret needed
       to generate a TSIG record for authenticating Dynamic DNS update
       requests, default type HMAC-MD5. These options are mutually exclusive.

       When the -y option is used, a signature is generated from
       [hmac:]keyname:secret.  keyname is the name of the key, and secret is
       the base64 encoded shared secret. Use of the -y option is discouraged
       because the shared secret is supplied as a command line argument in
       clear text. This may be visible in the output from ps(1) or in a
       history file maintained by the user's shell.

       With the -k option, nsupdate reads the shared secret from the file
       keyfile. Keyfiles may be in two formats: a single file containing a
       named.conf-format key statement, which may be generated automatically
       by ddns-confgen, or a pair of files whose names are of the format
       K{name}.+157.+{random}.key and K{name}.+157.+{random}.private, which
       can be generated by dnssec-keygen. The -k may also be used to specify a
       SIG(0) key used to authenticate Dynamic DNS update requests. In this
       case, the key specified is not an HMAC-MD5 key.

       nsupdate can be run in a local-host only mode using the -l flag. This
       sets the server address to localhost (disabling the server so that the
       server address cannot be overridden). Connections to the local server
       will use a TSIG key found in /var/run/named/session.key, which is
       automatically generated by named if any local master zone has set
       update-policy to local. The location of this key file can be overridden
       with the -k option.

       By default, nsupdate uses UDP to send update requests to the name
       server unless they are too large to fit in a UDP request in which case
       TCP will be used. The -v option makes nsupdate use a TCP connection.
       This may be preferable when a batch of update requests is made.

       The -p sets the default port number to use for connections to a name
       server. The default is 53.

       The -t option sets the maximum time an update request can take before
       it is aborted. The default is 300 seconds. Zero can be used to disable
       the timeout.

       The -u option sets the UDP retry interval. The default is 3 seconds. If
       zero, the interval will be computed from the timeout interval and
       number of UDP retries.

       The -r option sets the number of UDP retries. The default is 3. If
       zero, only one update request will be made.

       The -R randomdev option specifies a source of randomness. If the
       operating system does not provide a /dev/random or equivalent device,
       the default source of randomness is keyboard input.  randomdev
       specifies the name of a character device or file containing random data
       to be used instead of the default. The special value keyboard indicates
       that keyboard input should be used. This option may be specified
       multiple times.

INPUT FORMAT
       nsupdate reads input from filename or standard input. Each command is
       supplied on exactly one line of input. Some commands are for
       administrative purposes. The others are either update instructions or
       prerequisite checks on the contents of the zone. These checks set
       conditions that some name or set of resource records (RRset) either
       exists or is absent from the zone. These conditions must be met if the
       entire update request is to succeed. Updates will be rejected if the
       tests for the prerequisite conditions fail.

       Every update request consists of zero or more prerequisites and zero or
       more updates. This allows a suitably authenticated update request to
       proceed if some specified resource records are present or missing from
       the zone. A blank input line (or the send command) causes the
       accumulated commands to be sent as one Dynamic DNS update request to
       the name server.

       The command formats and their meaning are as follows:

       server {servername} [port]
	   Sends all dynamic update requests to the name server servername.
	   When no server statement is provided, nsupdate will send updates to
	   the master server of the correct zone. The MNAME field of that
	   zone's SOA record will identify the master server for that zone.
	   port is the port number on servername where the dynamic update
	   requests get sent. If no port number is specified, the default DNS
	   port number of 53 is used.

       local {address} [port]
	   Sends all dynamic update requests using the local address. When no
	   local statement is provided, nsupdate will send updates using an
	   address and port chosen by the system.  port can additionally be
	   used to make requests come from a specific port. If no port number
	   is specified, the system will assign one.

       zone {zonename}
	   Specifies that all updates are to be made to the zone zonename. If
	   no zone statement is provided, nsupdate will attempt determine the
	   correct zone to update based on the rest of the input.

       class {classname}
	   Specify the default class. If no class is specified, the default
	   class is IN.

       ttl {seconds}
	   Specify the default time to live for records to be added. The value
	   none will clear the default ttl.

       key {name} {secret}
	   Specifies that all updates are to be TSIG-signed using the keyname
	   keysecret pair. The key command overrides any key specified on the
	   command line via -y or -k.

       gsstsig
	   Use GSS-TSIG to sign the updated. This is equivalent to specifying
	   -g on the commandline.

       oldgsstsig
	   Use the Windows 2000 version of GSS-TSIG to sign the updated. This
	   is equivalent to specifying -o on the commandline.

       realm {[realm_name]}
	   When using GSS-TSIG use realm_name rather than the default realm in
	   krb5.conf. If no realm is specified the saved realm is cleared.

       [prereq] nxdomain {domain-name}
	   Requires that no resource record of any type exists with name
	   domain-name.

       [prereq] yxdomain {domain-name}
	   Requires that domain-name exists (has as at least one resource
	   record, of any type).

       [prereq] nxrrset {domain-name} [class] {type}
	   Requires that no resource record exists of the specified type,
	   class and domain-name. If class is omitted, IN (internet) is
	   assumed.

       [prereq] yxrrset {domain-name} [class] {type}
	   This requires that a resource record of the specified type, class
	   and domain-name must exist. If class is omitted, IN (internet) is
	   assumed.

       [prereq] yxrrset {domain-name} [class] {type} {data...}
	   The data from each set of prerequisites of this form sharing a
	   common type, class, and domain-name are combined to form a set of
	   RRs. This set of RRs must exactly match the set of RRs existing in
	   the zone at the given type, class, and domain-name. The data are
	   written in the standard text representation of the resource
	   record's RDATA.

       [update] del[ete] {domain-name} [ttl] [class] [type [data...]]
	   Deletes any resource records named domain-name. If type and data is
	   provided, only matching resource records will be removed. The
	   internet class is assumed if class is not supplied. The ttl is
	   ignored, and is only allowed for compatibility.

       [update] add {domain-name} {ttl} [class] {type} {data...}
	   Adds a new resource record with the specified ttl, class and data.

       show
	   Displays the current message, containing all of the prerequisites
	   and updates specified since the last send.

       send
	   Sends the current message. This is equivalent to entering a blank
	   line.

       answer
	   Displays the answer.

       debug
	   Turn on debugging.

       Lines beginning with a semicolon are comments and are ignored.

EXAMPLES
       The examples below show how nsupdate could be used to insert and delete
       resource records from the example.com zone. Notice that the input in
       each example contains a trailing blank line so that a group of commands
       are sent as one dynamic update request to the master name server for
       example.com.

	   # nsupdate
	   > update delete oldhost.example.com A
	   > update add newhost.example.com 86400 A 172.16.1.1
	   > send

       Any A records for oldhost.example.com are deleted. And an A record for
       newhost.example.com with IP address 172.16.1.1 is added. The
       newly-added record has a 1 day TTL (86400 seconds).

	   # nsupdate
	   > prereq nxdomain nickname.example.com
	   > update add nickname.example.com 86400 CNAME somehost.example.com
	   > send

       The prerequisite condition gets the name server to check that there are
       no resource records of any type for nickname.example.com. If there are,
       the update request fails. If this name does not exist, a CNAME for it
       is added. This ensures that when the CNAME is added, it cannot conflict
       with the long-standing rule in RFC 1034 that a name must not exist as
       any other record type if it exists as a CNAME. (The rule has been
       updated for DNSSEC in RFC 2535 to allow CNAMEs to have RRSIG, DNSKEY
       and NSEC records.)

FILES
       /etc/resolv.conf
	   used to identify default name server

       /var/run/named/session.key
	   sets the default TSIG key for use in local-only mode

       K{name}.+157.+{random}.key
	   base-64 encoding of HMAC-MD5 key created by dnssec-keygen(8).

       K{name}.+157.+{random}.private
	   base-64 encoding of HMAC-MD5 key created by dnssec-keygen(8).

SEE ALSO
       RFC 2136, RFC 3007, RFC 2104, RFC 2845, RFC 1034, RFC 2535, RFC 2931,
       named(8), ddns-confgen(8), dnssec-keygen(8).

BUGS
       The TSIG key is redundantly stored in two separate files. This is a
       consequence of nsupdate using the DST library for its cryptographic
       operations, and may change in future releases.

COPYRIGHT
       Copyright © 2004-2012 Internet Systems Consortium, Inc. ("ISC")
       Copyright © 2000-2003 Internet Software Consortium.

BIND9				 Aug 25, 2009			   NSUPDATE(1)
[top]

List of man pages available for Hurd

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net