open man page on OpenMandriva

Man page or keyword search:  
man Server   8135 pages
apropos Keyword Search (all sections)
Output format
OpenMandriva logo
[printable version]

OPEN(2)			   Linux Programmer's Manual		       OPEN(2)

NAME
       open, creat - open and possibly create a file or device

SYNOPSIS
       #include <sys/types.h>
       #include <sys/stat.h>
       #include <fcntl.h>

       int open(const char *pathname, int flags);
       int open(const char *pathname, int flags, mode_t mode);

       int creat(const char *pathname, mode_t mode);

DESCRIPTION
       Given a pathname for a file, open() returns a file descriptor, a small,
       nonnegative integer  for	 use  in  subsequent  system  calls  (read(2),
       write(2), lseek(2), fcntl(2), etc.).  The file descriptor returned by a
       successful call will be the lowest-numbered file	 descriptor  not  cur‐
       rently open for the process.

       By  default,  the  new  file descriptor is set to remain open across an
       execve(2) (i.e., the  FD_CLOEXEC	 file  descriptor  flag	 described  in
       fcntl(2)	 is  initially	disabled; the O_CLOEXEC flag, described below,
       can be used to change this default).  The file offset  is  set  to  the
       beginning of the file (see lseek(2)).

       A  call	to open() creates a new open file description, an entry in the
       system-wide table of open files.	 This entry records  the  file	offset
       and  the	 file status flags (modifiable via the fcntl(2) F_SETFL opera‐
       tion).  A file descriptor is a reference to one of these entries;  this
       reference is unaffected if pathname is subsequently removed or modified
       to refer to a different file.  The new open file	 description  is  ini‐
       tially  not  shared  with  any other process, but sharing may arise via
       fork(2).

       The argument flags must include one  of	the  following	access	modes:
       O_RDONLY,  O_WRONLY,  or	 O_RDWR.  These request opening the file read-
       only, write-only, or read/write, respectively.

       In addition, zero or more file creation flags and file status flags can
       be  bitwise-or'd	 in  flags.   The  file	 creation flags are O_CLOEXEC,
       O_CREAT, O_DIRECTORY, O_EXCL, O_NOCTTY, O_NOFOLLOW, O_TMPFILE, O_TRUNC,
       and  O_TTY_INIT.	  The file status flags are all of the remaining flags
       listed below.  The distinction between these two	 groups	 of  flags  is
       that  the  file status flags can be retrieved and (in some cases) modi‐
       fied; see fcntl(2) for details.

       The full list of file creation flags and file status flags is  as  fol‐
       lows:

       O_APPEND
	      The  file	 is  opened in append mode.  Before each write(2), the
	      file offset is positioned at the end of the  file,  as  if  with
	      lseek(2).	  O_APPEND may lead to corrupted files on NFS filesys‐
	      tems if more than one process appends data to a  file  at	 once.
	      This is because NFS does not support appending to a file, so the
	      client kernel has to simulate it, which can't be done without  a
	      race condition.

       O_ASYNC
	      Enable  signal-driven  I/O: generate a signal (SIGIO by default,
	      but this can be changed  via  fcntl(2))  when  input  or	output
	      becomes  possible	 on  this  file	 descriptor.   This feature is
	      available only  for  terminals,  pseudoterminals,	 sockets,  and
	      (since  Linux  2.6)  pipes  and FIFOs.  See fcntl(2) for further
	      details.	See also BUGS, below.

       O_CLOEXEC (since Linux 2.6.23)
	      Enable the close-on-exec	flag  for  the	new  file  descriptor.
	      Specifying  this	flag  permits  a  program  to avoid additional
	      fcntl(2) F_SETFD operations to set the FD_CLOEXEC	 flag.	 Addi‐
	      tionally,	 use  of  this flag is essential in some multithreaded
	      programs since using a separate fcntl(2)	F_SETFD	 operation  to
	      set  the	FD_CLOEXEC  flag does not suffice to avoid race condi‐
	      tions where one thread opens a file descriptor at the same  time
	      as another thread does a fork(2) plus execve(2).

       O_CREAT
	      If  the file does not exist it will be created.  The owner (user
	      ID) of the file is set to the effective user ID of the  process.
	      The  group  ownership  (group ID) is set either to the effective
	      group ID of the process or to the group ID of the parent	direc‐
	      tory  (depending	on  filesystem type and mount options, and the
	      mode of the parent directory; see the  mount  options  bsdgroups
	      and sysvgroups described in mount(8)).

	      mode specifies the permissions to use in case a new file is cre‐
	      ated.  This argument must be supplied when O_CREAT or  O_TMPFILE
	      is specified in flags; if neither O_CREAT nor O_TMPFILE is spec‐
	      ified, then mode is ignored.  The effective permissions are mod‐
	      ified  by	 the process's umask in the usual way: The permissions
	      of the created file are (mode & ~umask).	Note  that  this  mode
	      applies  only  to future accesses of the newly created file; the
	      open() call that creates a read-only  file  may  well  return  a
	      read/write file descriptor.

	      The following symbolic constants are provided for mode:

	      S_IRWXU  00700  user  (file  owner)  has read, write and execute
		       permission

	      S_IRUSR  00400 user has read permission

	      S_IWUSR  00200 user has write permission

	      S_IXUSR  00100 user has execute permission

	      S_IRWXG  00070 group has read, write and execute permission

	      S_IRGRP  00040 group has read permission

	      S_IWGRP  00020 group has write permission

	      S_IXGRP  00010 group has execute permission

	      S_IRWXO  00007 others have read, write and execute permission

	      S_IROTH  00004 others have read permission

	      S_IWOTH  00002 others have write permission

	      S_IXOTH  00001 others have execute permission

       O_DIRECT (since Linux 2.4.10)
	      Try to minimize cache effects of the I/O to and from this	 file.
	      In  general  this	 will degrade performance, but it is useful in
	      special situations, such	as  when  applications	do  their  own
	      caching.	 File I/O is done directly to/from user-space buffers.
	      The O_DIRECT flag on its own makes an effort  to	transfer  data
	      synchronously,  but  does	 not give the guarantees of the O_SYNC
	      flag that data and necessary metadata are transferred.  To guar‐
	      antee  synchronous  I/O,	O_SYNC	must  be  used	in addition to
	      O_DIRECT.	 See NOTES below for further discussion.

	      A semantically similar  (but  deprecated)	 interface  for	 block
	      devices is described in raw(8).

       O_DIRECTORY
	      If  pathname  is	not a directory, cause the open to fail.  This
	      flag is Linux-specific, and was added in kernel version 2.1.126,
	      to avoid denial-of-service problems if opendir(3) is called on a
	      FIFO or tape device.

       O_EXCL Ensure that this call creates the file: if this flag  is	speci‐
	      fied  in	conjunction with O_CREAT, and pathname already exists,
	      then open() will fail.

	      When these two flags are specified, symbolic links are not  fol‐
	      lowed: if pathname is a symbolic link, then open() fails regard‐
	      less of where the symbolic link points to.

	      In general, the behavior of O_EXCL is undefined if  it  is  used
	      without  O_CREAT.	  There	 is  one  exception:  on Linux 2.6 and
	      later, O_EXCL can be used without O_CREAT if pathname refers  to
	      a	 block	device.	  If  the block device is in use by the system
	      (e.g., mounted), open() fails with the error EBUSY.

	      On NFS, O_EXCL is supported only when using NFSv3	 or  later  on
	      kernel  2.6  or later.  In NFS environments where O_EXCL support
	      is not provided, programs that rely on it for performing locking
	      tasks  will  contain  a  race condition.	Portable programs that
	      want to perform atomic file locking using a lockfile,  and  need
	      to avoid reliance on NFS support for O_EXCL, can create a unique
	      file on the same filesystem (e.g.,  incorporating	 hostname  and
	      PID),  and  use  link(2)	to  make  a  link to the lockfile.  If
	      link(2) returns 0,  the  lock  is	 successful.   Otherwise,  use
	      stat(2)  on  the	unique	file  to  check	 if its link count has
	      increased to 2, in which case the lock is also successful.

       O_LARGEFILE
	      (LFS) Allow files whose sizes cannot be represented in an	 off_t
	      (but  can	 be  represented  in  an  off64_t)  to be opened.  The
	      _LARGEFILE64_SOURCE macro must be defined (before including  any
	      header  files)  in order to obtain this definition.  Setting the
	      _FILE_OFFSET_BITS feature test macro to 64  (rather  than	 using
	      O_LARGEFILE) is the preferred method of accessing large files on
	      32-bit systems (see feature_test_macros(7)).

       O_NOATIME (since Linux 2.6.8)
	      Do not update the file last access time (st_atime in the	inode)
	      when  the	 file  is  read(2).   This flag is intended for use by
	      indexing or backup programs, where  its  use  can	 significantly
	      reduce the amount of disk activity.  This flag may not be effec‐
	      tive on all filesystems.	One example is NFS, where  the	server
	      maintains the access time.

       O_NOCTTY
	      If  pathname  refers to a terminal device—see tty(4)—it will not
	      become the process's controlling terminal even  if  the  process
	      does not have one.

       O_NOFOLLOW
	      If  pathname is a symbolic link, then the open fails.  This is a
	      FreeBSD extension, which was added to Linux in version  2.1.126.
	      Symbolic	links in earlier components of the pathname will still
	      be followed.  See also O_PATH below.

       O_NONBLOCK or O_NDELAY
	      When possible, the file is opened in nonblocking mode.   Neither
	      the  open() nor any subsequent operations on the file descriptor
	      which is returned will cause the calling process to  wait.   For
	      the  handling  of	 FIFOs (named pipes), see also fifo(7).	 For a
	      discussion of the	 effect	 of  O_NONBLOCK	 in  conjunction  with
	      mandatory file locks and with file leases, see fcntl(2).

       O_PATH (since Linux 2.6.39)
	      Obtain  a	 file descriptor that can be used for two purposes: to
	      indicate a location in the filesystem tree and to perform opera‐
	      tions  that  act	purely at the file descriptor level.  The file
	      itself is not opened, and other file operations (e.g.,  read(2),
	      write(2), fchmod(2), fchown(2), fgetxattr(2), mmap(2)) fail with
	      the error EBADF.

	      The following operations can be performed on the resulting  file
	      descriptor:

	      *	 close(2);  fchdir(2) (since Linux 3.5); fstat(2) (since Linux
		 3.6).

	      *	 Duplicating the file descriptor  (dup(2),  fcntl(2)  F_DUPFD,
		 etc.).

	      *	 Getting  and  setting file descriptor flags (fcntl(2) F_GETFD
		 and F_SETFD).

	      *	 Retrieving open file status flags using the fcntl(2)  F_GETFL
		 operation: the returned flags will include the bit O_PATH.

	      *	 Passing  the  file  descriptor	 as the dirfd argument of ope‐
		 nat(2) and the other "*at()" system calls.

	      *	 Passing the file descriptor to another	 process  via  a  UNIX
		 domain socket (see SCM_RIGHTS in unix(7)).

	      When O_PATH is specified in flags, flag bits other than O_DIREC‐
	      TORY and O_NOFOLLOW are ignored.

	      If the O_NOFOLLOW flag is also specified, then the call  returns
	      a	 file  descriptor  referring  to the symbolic link.  This file
	      descriptor can be used as the dirfd argument in calls to	fchow‐
	      nat(2),  fstatat(2),  linkat(2), and readlinkat(2) with an empty
	      pathname to have the calls operate on the symbolic link.

       O_SYNC The file is opened for synchronous I/O.  Any  write(2)s  on  the
	      resulting	 file  descriptor will block the calling process until
	      the data has been physically written to the underlying hardware.
	      But see NOTES below.

       O_TMPFILE (since Linux 3.11)
	      Create  an unnamed temporary file.  The pathname argument speci‐
	      fies a directory; an unnamed  inode  will	 be  created  in  that
	      directory's  filesystem.	Anything written to the resulting file
	      will be lost when the last file descriptor is closed, unless the
	      file is given a name.

	      O_TMPFILE	 must be specified with one of O_RDWR or O_WRONLY and,
	      optionally, O_EXCL.  If O_EXCL is not specified, then  linkat(2)
	      can be used to link the temporary file into the filesystem, mak‐
	      ing it permanent, using code like the following:

		  char path[PATH_MAX];
		  fd = open("/path/to/dir", O_TMPFILE | O_RDWR,
					  S_IRUSR | S_IWUSR);

		  /* File I/O on 'fd'... */

		  snprintf(path, PATH_MAX,  "/proc/self/fd/%d", fd);
		  linkat(AT_FDCWD, path, AT_FDCWD, "/path/for/file",
					  AT_SYMLINK_FOLLOW);

	      In this case, the open() mode argument determines the file  per‐
	      mission mode, as with O_CREAT.

	      Specifying  O_EXCL in conjunction with O_TMPFILE prevents a tem‐
	      porary file from being linked into the filesystem in  the	 above
	      manner.	(Note  that the meaning of O_EXCL in this case is dif‐
	      ferent from the meaning of O_EXCL otherwise.)

	      There are two main use cases for O_TMPFILE:

	      *	 Improved tmpfile(3) functionality: race-free creation of tem‐
		 porary	 files that (1) are automatically deleted when closed;
		 (2) can never be reached via any pathname; (3) are  not  sub‐
		 ject to symlink attacks; and (4) do not require the caller to
		 devise unique names.

	      *	 Creating a file that is initially invisible,  which  is  then
		 populated with data and adjusted to have appropriate filesys‐
		 tem  attributes  (chown(2),  chmod(2),	 fsetxattr(2),	 etc.)
		 before being atomically linked into the filesystem in a fully
		 formed state (using linkat(2) as described above).

	      O_TMPFILE requires support by the underlying filesystem; only  a
	      subset of Linux filesystems provide that support.

       O_TRUNC
	      If  the file already exists and is a regular file and the access
	      mode allows writing (i.e., is O_RDWR or  O_WRONLY)  it  will  be
	      truncated to length 0.  If the file is a FIFO or terminal device
	      file, the O_TRUNC flag is	 ignored.   Otherwise  the  effect  of
	      O_TRUNC is unspecified.

       creat()	  is	equivalent    to    open()   with   flags   equal   to
       O_CREAT|O_WRONLY|O_TRUNC.

RETURN VALUE
       open() and creat() return the new file descriptor, or -1	 if  an	 error
       occurred (in which case, errno is set appropriately).

ERRORS
       EACCES The  requested access to the file is not allowed, or search per‐
	      mission is denied for one of the directories in the path	prefix
	      of  pathname,  or the file did not exist yet and write access to
	      the parent directory is not  allowed.   (See  also  path_resolu‐
	      tion(7).)

       EDQUOT Where  O_CREAT  is  specified,  the file does not exist, and the
	      user's quota of disk blocks or inodes on the filesystem has been
	      exhausted.

       EEXIST pathname already exists and O_CREAT and O_EXCL were used.

       EFAULT pathname points outside your accessible address space.

       EFBIG  See EOVERFLOW.

       EINTR  While  blocked  waiting  to  complete  an	 open of a slow device
	      (e.g., a FIFO; see fifo(7)), the call was interrupted by a  sig‐
	      nal handler; see signal(7).

       EINVAL The  filesystem  does  not support the O_DIRECT flag.  See NOTES
	      for more information.

       EINVAL Invalid value in flags.

       EINVAL O_TMPFILE was specified  in  flags,  but	neither	 O_WRONLY  nor
	      O_RDWR was specified.

       EISDIR pathname refers to a directory and the access requested involved
	      writing (that is, O_WRONLY or O_RDWR is set).

       EISDIR pathname refers to an existing directory, O_TMPFILE and  one  of
	      O_WRONLY or O_RDWR were specified in flags, but this kernel ver‐
	      sion does not provide the O_TMPFILE functionality.

       ELOOP  Too many symbolic links were encountered in resolving  pathname,
	      or O_NOFOLLOW was specified but pathname was a symbolic link.

       EMFILE The process already has the maximum number of files open.

       ENAMETOOLONG
	      pathname was too long.

       ENFILE The  system  limit  on  the  total number of open files has been
	      reached.

       ENODEV pathname refers to a device special file	and  no	 corresponding
	      device  exists.	(This is a Linux kernel bug; in this situation
	      ENXIO must be returned.)

       ENOENT O_CREAT is not set and the named file does  not  exist.	Or,  a
	      directory	 component in pathname does not exist or is a dangling
	      symbolic link.

       ENOENT pathname refers to a nonexistent directory, O_TMPFILE and one of
	      O_WRONLY or O_RDWR were specified in flags, but this kernel ver‐
	      sion does not provide the O_TMPFILE functionality.

       ENOMEM Insufficient kernel memory was available.

       ENOSPC pathname was to be created but the  device  containing  pathname
	      has no room for the new file.

       ENOTDIR
	      A	 component  used as a directory in pathname is not, in fact, a
	      directory, or O_DIRECTORY was specified and pathname was	not  a
	      directory.

       ENXIO  O_NONBLOCK  |  O_WRONLY  is set, the named file is a FIFO and no
	      process has the file open for reading.  Or, the file is a device
	      special file and no corresponding device exists.

       EOPNOTSUPP
	      The filesystem containing pathname does not support O_TMPFILE.

       EOVERFLOW
	      pathname	refers	to  a  regular	file  that  is too large to be
	      opened.  The usual scenario here is that an application compiled
	      on  a  32-bit  platform  without -D_FILE_OFFSET_BITS=64 tried to
	      open a file whose size exceeds (2<<31)-1 bits; see also O_LARGE‐
	      FILE  above.   This  is  the error specified by POSIX.1-2001; in
	      kernels before 2.6.24, Linux gave the error EFBIG for this case.

       EPERM  The O_NOATIME flag was specified, but the effective user	ID  of
	      the  caller  did	not match the owner of the file and the caller
	      was not privileged (CAP_FOWNER).

       EROFS  pathname refers to a file on a read-only	filesystem  and	 write
	      access was requested.

       ETXTBSY
	      pathname	refers to an executable image which is currently being
	      executed and write access was requested.

       EWOULDBLOCK
	      The O_NONBLOCK flag was specified, and an incompatible lease was
	      held on the file (see fcntl(2)).

CONFORMING TO
       SVr4, 4.3BSD, POSIX.1-2001, POSIX.1-2008.

       The  O_DIRECT,  O_NOATIME,  O_PATH,  and O_TMPFILE flags are Linux-spe‐
       cific.  One must define _GNU_SOURCE to obtain their definitions.

       The O_CLOEXEC, O_DIRECTORY, and O_NOFOLLOW flags are not	 specified  in
       POSIX.1-2001, but are specified in POSIX.1-2008.	 Since glibc 2.12, one
       can obtain their definitions by defining either _POSIX_C_SOURCE with  a
       value  greater  than  or equal to 200809L or _XOPEN_SOURCE with a value
       greater than or equal to 700.  In glibc 2.11 and earlier,  one  obtains
       the definitions by defining _GNU_SOURCE.

       As  noted  in  feature_test_macros(7),  feature	test  macros  such  as
       _POSIX_C_SOURCE, _XOPEN_SOURCE, and _GNU_SOURCE must be defined	before
       including any header files.

NOTES
       Under  Linux,  the O_NONBLOCK flag indicates that one wants to open but
       does not necessarily have the intention to read or write.  This is typ‐
       ically  used  to open devices in order to get a file descriptor for use
       with ioctl(2).

       Unlike the other values that can be specified in flags, the access mode
       values  O_RDONLY,  O_WRONLY, and O_RDWR do not specify individual bits.
       Rather, they define the low order two bits of flags,  and  are  defined
       respectively  as 0, 1, and 2.  In other words, the combination O_RDONLY
       | O_WRONLY is a logical error, and certainly does  not  have  the  same
       meaning as O_RDWR.  Linux reserves the special, nonstandard access mode
       3 (binary 11) in flags to mean: check for read and write permission  on
       the  file  and  return  a  descriptor that can't be used for reading or
       writing.	 This nonstandard access mode is used by some Linux drivers to
       return  a  descriptor  that  is	to  be	used  only for device-specific
       ioctl(2) operations.

       The (undefined) effect of O_RDONLY | O_TRUNC varies  among  implementa‐
       tions.  On many systems the file is actually truncated.

       There  are  many infelicities in the protocol underlying NFS, affecting
       amongst others O_SYNC and O_NDELAY.

       POSIX provides for three different variants of synchronized I/O, corre‐
       sponding	  to  the  flags  O_SYNC,  O_DSYNC,  and  O_RSYNC.   Currently
       (2.6.31), Linux implements only O_SYNC,	but  glibc  maps  O_DSYNC  and
       O_RSYNC	to the same numerical value as O_SYNC.	Most Linux filesystems
       don't actually implement the POSIX O_SYNC semantics, which require  all
       metadata	 updates  of a write to be on disk on returning to user space,
       but only the O_DSYNC semantics, which require only actual file data and
       metadata	 necessary to retrieve it to be on disk by the time the system
       call returns.

       Note that open() can open device special files, but creat() cannot cre‐
       ate them; use mknod(2) instead.

       On  NFS	filesystems with UID mapping enabled, open() may return a file
       descriptor but, for example, read(2) requests are denied	 with  EACCES.
       This is because the client performs open() by checking the permissions,
       but UID mapping	is  performed  by  the	server	upon  read  and	 write
       requests.

       If  the	file is newly created, its st_atime, st_ctime, st_mtime fields
       (respectively, time of last access, time of  last  status  change,  and
       time  of	 last  modification; see stat(2)) are set to the current time,
       and so are the st_ctime and st_mtime fields of  the  parent  directory.
       Otherwise,  if  the  file  is modified because of the O_TRUNC flag, its
       st_ctime and st_mtime fields are set to the current time.

   O_DIRECT
       The O_DIRECT flag may impose alignment restrictions on the  length  and
       address	of  user-space	buffers and the file offset of I/Os.  In Linux
       alignment restrictions vary by filesystem and kernel version and	 might
       be  absent entirely.  However there is currently no filesystem-indepen‐
       dent interface for an application to discover these restrictions for  a
       given  file  or	filesystem.  Some filesystems provide their own inter‐
       faces for doing	so,  for  example  the	XFS_IOC_DIOINFO	 operation  in
       xfsctl(3).

       Under  Linux  2.4, transfer sizes, and the alignment of the user buffer
       and the file offset must all be multiples of the logical block size  of
       the filesystem.	Under Linux 2.6, alignment to 512-byte boundaries suf‐
       fices.

       O_DIRECT I/Os should never be run concurrently with the fork(2)	system
       call, if the memory buffer is a private mapping (i.e., any mapping cre‐
       ated with the mmap(2) MAP_PRIVATE flag; this includes memory  allocated
       on  the heap and statically allocated buffers).	Any such I/Os, whether
       submitted via an asynchronous I/O interface or from another  thread  in
       the  process, should be completed before fork(2) is called.  Failure to
       do so can result in data corruption and undefined  behavior  in	parent
       and  child  processes.  This restriction does not apply when the memory
       buffer for the O_DIRECT I/Os was created using shmat(2) or mmap(2) with
       the  MAP_SHARED	flag.  Nor does this restriction apply when the memory
       buffer has been advised as MADV_DONTFORK with madvise(2), ensuring that
       it will not be available to the child after fork(2).

       The  O_DIRECT  flag  was introduced in SGI IRIX, where it has alignment
       restrictions similar to those of Linux 2.4.  IRIX has also  a  fcntl(2)
       call  to	 query	appropriate alignments, and sizes.  FreeBSD 4.x intro‐
       duced a flag of the same name, but without alignment restrictions.

       O_DIRECT support was added under Linux in kernel version 2.4.10.	 Older
       Linux kernels simply ignore this flag.  Some filesystems may not imple‐
       ment the flag and open() will fail with EINVAL if it is used.

       Applications should avoid mixing O_DIRECT and normal I/O	 to  the  same
       file,  and  especially  to  overlapping	byte regions in the same file.
       Even when the filesystem correctly handles the coherency issues in this
       situation,  overall  I/O	 throughput  is likely to be slower than using
       either mode alone.  Likewise, applications should avoid mixing  mmap(2)
       of files with direct I/O to the same files.

       The  behaviour of O_DIRECT with NFS will differ from local filesystems.
       Older kernels, or kernels configured in certain ways, may  not  support
       this  combination.   The NFS protocol does not support passing the flag
       to the server, so O_DIRECT I/O will bypass the page cache only  on  the
       client; the server may still cache the I/O.  The client asks the server
       to make the I/O synchronous to preserve the  synchronous	 semantics  of
       O_DIRECT.   Some servers will perform poorly under these circumstances,
       especially if the I/O size is small.  Some servers may also be  config‐
       ured  to	 lie  to  clients about the I/O having reached stable storage;
       this will avoid the performance penalty at some risk to data  integrity
       in  the	event of server power failure.	The Linux NFS client places no
       alignment restrictions on O_DIRECT I/O.

       In summary, O_DIRECT is a potentially powerful tool that should be used
       with  caution.	It  is	recommended  that  applications	 treat	use of
       O_DIRECT as a performance option which is disabled by default.

	      "The thing that has always disturbed me about O_DIRECT  is  that
	      the whole interface is just stupid, and was probably designed by
	      a	 deranged  monkey  on  some  serious   mind-controlling	  sub‐
	      stances."—Linus

BUGS
       Currently, it is not possible to enable signal-driven I/O by specifying
       O_ASYNC when calling open(); use fcntl(2) to enable this flag.

       One must check for two different error codes, EISDIR and	 ENOENT,  when
       trying  to  determine whether the kernel supports O_TMPFILE functional‐
       ity.

SEE ALSO
       chmod(2), chown(2),  close(2),  dup(2),	fcntl(2),  link(2),  lseek(2),
       mknod(2),  mmap(2),  mount(2),  openat(2), read(2), socket(2), stat(2),
       umask(2), unlink(2), write(2), fopen(3),	 fifo(7),  path_resolution(7),
       symlink(7)

COLOPHON
       This  page  is  part of release 3.58 of the Linux man-pages project.  A
       description of the project, and information about reporting  bugs,  can
       be found at http://www.kernel.org/doc/man-pages/.

Linux				  2014-01-20			       OPEN(2)
[top]

List of man pages available for OpenMandriva

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net