PARTITION(8)PARTITION(8)NAMEpartition - make a partition table
SYNOPSISpartition [-mfn] device [type:]length[+*] ...
DESCRIPTION
Partition makes a partition table on device using the types and sizes
given. It may be used in combination with repartition(8) for automatic
installation of MINIX 3.
You may give up to four type:length[+*] specifications for the parti‐
tions. You may also specify holes before, between, and after the par‐
titions. A hole differs from a partition specification by not having a
type.
The first hole is by default 1 sector to make space for the primary
bootstrap and the partition table. The other holes are 0.
The type field is the type of the partitition in hexadecimal. The
length field is the partition's size in sectors. The + or * may
optionally be added to indicate that the partition must be expanded to
contain any leftover space on the device or to mark the partition
active.
Instead of a length you may use the word exist to indicate that an
existing partition of the given type must be kept from the old parti‐
tion table.
Partitions are padded out to cylinder boundaries, except for the first
one, it starts on track 1. Some operating systems care about this.
MINIX 3 and MS-DOS do not.
OPTIONS-m MINIX 3 only, no need to pad partitions. This is the default
for subpartition tables.
-f Force making a partition table even if the device is too small.
-n Play-act, don't write the new table, just show what it would
look like.
EXAMPLEpartition /dev/hd0 01:16384 81:40000 81:2880* 06:20000+
Partitions disk 0 into an 8 Mb DOS partition, 20 Mb MINIX 3 /usr, 1.44
Mb MINIX 3 / (active), and a DOS partition of at least 10 Mb at the end
of the disk. (06:0+ would have been ok too, it's just a sanity check.)
SEE ALSOhd(4), part(8), repartition(8).
AUTHOR
Kees J. Bot (kjb@cs.vu.nl)
PARTITION(8)
