pod2text man page on Slackware

Man page or keyword search:  
man Server   14563 pages
apropos Keyword Search (all sections)
Output format
Slackware logo
[printable version]

POD2TEXT(1)	       Perl Programmers Reference Guide		   POD2TEXT(1)

NAME
       pod2text - Convert POD data to formatted ASCII text

SYNOPSIS
       pod2text [-aclostu] [--code] [--errors=style] [-i indent]
	   [-q quotes] [--nourls] [--stderr] [-w width]
	   [input [output ...]]

       pod2text -h

DESCRIPTION
       pod2text is a front-end for Pod::Text and its subclasses.  It uses them
       to generate formatted ASCII text from POD source.  It can optionally
       use either termcap sequences or ANSI color escape sequences to format
       the text.

       input is the file to read for POD source (the POD can be embedded in
       code).  If input isn't given, it defaults to "STDIN".  output, if
       given, is the file to which to write the formatted output.  If output
       isn't given, the formatted output is written to "STDOUT".  Several POD
       files can be processed in the same pod2text invocation (saving module
       load and compile times) by providing multiple pairs of input and output
       files on the command line.

OPTIONS
       -a, --alt
	   Use an alternate output format that, among other things, uses a
	   different heading style and marks "=item" entries with a colon in
	   the left margin.

       --code
	   Include any non-POD text from the input file in the output as well.
	   Useful for viewing code documented with POD blocks with the POD
	   rendered and the code left intact.

       -c, --color
	   Format the output with ANSI color escape sequences.	Using this
	   option requires that Term::ANSIColor be installed on your system.

       -i indent, --indent=indent
	   Set the number of spaces to indent regular text, and the default
	   indentation for "=over" blocks.  Defaults to 4 spaces if this
	   option isn't given.

       -errors=style
	   Set the error handling style.  "die" says to throw an exception on
	   any POD formatting error.  "stderr" says to report errors on
	   standard error, but not to throw an exception.  "pod" says to
	   include a POD ERRORS section in the resulting documentation
	   summarizing the errors.  "none" ignores POD errors entirely, as
	   much as possible.

	   The default is "die".

       -h, --help
	   Print out usage information and exit.

       -l, --loose
	   Print a blank line after a "=head1" heading.	 Normally, no blank
	   line is printed after "=head1", although one is still printed after
	   "=head2", because this is the expected formatting for manual pages;
	   if you're formatting arbitrary text documents, using this option is
	   recommended.

       -m width, --left-margin=width, --margin=width
	   The width of the left margin in spaces.  Defaults to 0.  This is
	   the margin for all text, including headings, not the amount by
	   which regular text is indented; for the latter, see -i option.

       --nourls
	   Normally, L<> formatting codes with a URL but anchor text are
	   formatted to show both the anchor text and the URL.	In other
	   words:

	       L<foo|http://example.com/>

	   is formatted as:

	       foo <http://example.com/>

	   This flag, if given, suppresses the URL when anchor text is given,
	   so this example would be formatted as just "foo".  This can produce
	   less cluttered output in cases where the URLs are not particularly
	   important.

       -o, --overstrike
	   Format the output with overstrike printing.	Bold text is rendered
	   as character, backspace, character.	Italics and file names are
	   rendered as underscore, backspace, character.  Many pagers, such as
	   less, know how to convert this to bold or underlined text.

       -q quotes, --quotes=quotes
	   Sets the quote marks used to surround C<> text to quotes.  If
	   quotes is a single character, it is used as both the left and right
	   quote; if quotes is two characters, the first character is used as
	   the left quote and the second as the right quoted; and if quotes is
	   four characters, the first two are used as the left quote and the
	   second two as the right quote.

	   quotes may also be set to the special value "none", in which case
	   no quote marks are added around C<> text.

       -s, --sentence
	   Assume each sentence ends with two spaces and try to preserve that
	   spacing.  Without this option, all consecutive whitespace in non-
	   verbatim paragraphs is compressed into a single space.

       --stderr
	   By default, pod2text dies if any errors are detected in the POD
	   input.  If --stderr is given and no --errors flag is present,
	   errors are sent to standard error, but pod2text does not abort.
	   This is equivalent to "--errors=stderr" and is supported for
	   backward compatibility.

       -t, --termcap
	   Try to determine the width of the screen and the bold and underline
	   sequences for the terminal from termcap, and use that information
	   in formatting the output.  Output will be wrapped at two columns
	   less than the width of your terminal device.	 Using this option
	   requires that your system have a termcap file somewhere where
	   Term::Cap can find it and requires that your system support
	   termios.  With this option, the output of pod2text will contain
	   terminal control sequences for your current terminal type.

       -u, --utf8
	   By default, pod2text tries to use the same output encoding as its
	   input encoding (to be backward-compatible with older versions).
	   This option says to instead force the output encoding to UTF-8.

	   Be aware that, when using this option, the input encoding of your
	   POD source must be properly declared unless it is US-ASCII or
	   Latin-1.  POD input without an "=encoding" command will be assumed
	   to be in Latin-1, and if it's actually in UTF-8, the output will be
	   double-encoded.  See perlpod(1) for more information on the
	   "=encoding" command.

       -w, --width=width, -width
	   The column at which to wrap text on the right-hand side.  Defaults
	   to 76, unless -t is given, in which case it's two columns less than
	   the width of your terminal device.

EXIT STATUS
       As long as all documents processed result in some output, even if that
       output includes errata (a "POD ERRORS" section generated with
       "--errors=pod"), pod2text will exit with status 0.  If any of the
       documents being processed do not result in an output document, pod2text
       will exit with status 1.	 If there are syntax errors in a POD document
       being processed and the error handling style is set to the default of
       "die", pod2text will abort immediately with exit status 255.

DIAGNOSTICS
       If pod2text fails with errors, see Pod::Text and Pod::Simple for
       information about what those errors might mean.	Internally, it can
       also produce the following diagnostics:

       -c (--color) requires Term::ANSIColor be installed
	   (F) -c or --color were given, but Term::ANSIColor could not be
	   loaded.

       Unknown option: %s
	   (F) An unknown command line option was given.

       In addition, other Getopt::Long error messages may result from invalid
       command-line options.

ENVIRONMENT
       COLUMNS
	   If -t is given, pod2text will take the current width of your screen
	   from this environment variable, if available.  It overrides
	   terminal width information in TERMCAP.

       TERMCAP
	   If -t is given, pod2text will use the contents of this environment
	   variable if available to determine the correct formatting sequences
	   for your current terminal device.

SEE ALSO
       Pod::Text, Pod::Text::Color, Pod::Text::Overstrike, Pod::Text::Termcap,
       Pod::Simple, perlpod(1)

       The current version of this script is always available from its web
       site at <http://www.eyrie.org/~eagle/software/podlators/>.  It is also
       part of the Perl core distribution as of 5.6.0.

AUTHOR
       Russ Allbery <rra@stanford.edu>.

COPYRIGHT AND LICENSE
       Copyright 1999, 2000, 2001, 2004, 2006, 2008, 2010, 2012, 2013 Russ
       Allbery <rra@stanford.edu>.

       This program is free software; you may redistribute it and/or modify it
       under the same terms as Perl itself.

perl v5.18.1			  2013-09-02			   POD2TEXT(1)
[top]
                             _         _         _ 
                            | |       | |       | |     
                            | |       | |       | |     
                         __ | | __ __ | | __ __ | | __  
                         \ \| |/ / \ \| |/ / \ \| |/ /  
                          \ \ / /   \ \ / /   \ \ / /   
                           \   /     \   /     \   /    
                            \_/       \_/       \_/ 
More information is available in HTML format for server Slackware

List of man pages available for Slackware

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net