POLL(P) POSIX Programmer's Manual POLL(P)PROLOG
This manual page is part of the POSIX Programmer's Manual. The Linux
implementation of this interface may differ (consult the corresponding
Linux manual page for details of Linux behavior), or the interface may
not be implemented on Linux.
NAMEpoll - input/output multiplexing
SYNOPSIS
#include <poll.h>
int poll(struct pollfd fds[], nfds_t nfds, int timeout);
DESCRIPTION
The poll() function provides applications with a mechanism for multi‐
plexing input/output over a set of file descriptors. For each member
of the array pointed to by fds, poll() shall examine the given file
descriptor for the event(s) specified in events. The number of pollfd
structures in the fds array is specified by nfds. The poll() function
shall identify those file descriptors on which an application can read
or write data, or on which certain events have occurred.
The fds argument specifies the file descriptors to be examined and the
events of interest for each file descriptor. It is a pointer to an
array with one member for each open file descriptor of interest. The
array's members are pollfd structures within which fd specifies an open
file descriptor and events and revents are bitmasks constructed by
OR'ing a combination of the following event flags:
POLLIN Data other than high-priority data may be read without blocking.
For STREAMS, this flag is set in revents even if the message is of zero
length. This flag shall be equivalent to POLLRDNORM | POLLRDBAND.
POLLRDNORM
Normal data may be read without blocking.
For STREAMS, data on priority band 0 may be read without blocking.
This flag is set in revents even if the message is of zero length.
POLLRDBAND
Priority data may be read without blocking.
For STREAMS, data on priority bands greater than 0 may be read without
blocking. This flag is set in revents even if the message is of zero
length.
POLLPRI
High-priority data may be read without blocking.
For STREAMS, this flag is set in revents even if the message is of zero
length.
POLLOUT
Normal data may be written without blocking.
For STREAMS, data on priority band 0 may be written without blocking.
POLLWRNORM
Equivalent to POLLOUT.
POLLWRBAND
Priority data may be written.
For STREAMS, data on priority bands greater than 0 may be written with‐
out blocking. If any priority band has been written to on this STREAM,
this event only examines bands that have been written to at least once.
POLLERR
An error has occurred on the device or stream. This flag is only
valid in the revents bitmask; it shall be ignored in the events
member.
POLLHUP
The device has been disconnected. This event and POLLOUT are
mutually-exclusive; a stream can never be writable if a hangup
has occurred. However, this event and POLLIN, POLLRDNORM, POLL‐
RDBAND, or POLLPRI are not mutually-exclusive. This flag is only
valid in the revents bitmask; it shall be ignored in the events
member.
POLLNVAL
The specified fd value is invalid. This flag is only valid in
the revents member; it shall ignored in the events member.
The significance and semantics of normal, priority, and high-priority
data are file and device-specific.
If the value of fd is less than 0, events shall be ignored, and revents
shall be set to 0 in that entry on return from poll().
In each pollfd structure, poll() shall clear the revents member, except
that where the application requested a report on a condition by setting
one of the bits of events listed above, poll() shall set the corre‐
sponding bit in revents if the requested condition is true. In addi‐
tion, poll() shall set the POLLHUP, POLLERR, and POLLNVAL flag in
revents if the condition is true, even if the application did not set
the corresponding bit in events.
If none of the defined events have occurred on any selected file
descriptor, poll() shall wait at least timeout milliseconds for an
event to occur on any of the selected file descriptors. If the value
of timeout is 0, poll() shall return immediately. If the value of time‐
out is -1, poll() shall block until a requested event occurs or until
the call is interrupted.
Implementations may place limitations on the granularity of timeout
intervals. If the requested timeout interval requires a finer granular‐
ity than the implementation supports, the actual timeout interval shall
be rounded up to the next supported value.
The poll() function shall not be affected by the O_NONBLOCK flag.
The poll() function shall support regular files, terminal and pseudo-
terminal devices, FIFOs, pipes, sockets and STREAMS-based files. The
behavior of poll() on elements of fds that refer to other types of file
is unspecified.
Regular files shall always poll TRUE for reading and writing.
A file descriptor for a socket that is listening for connections shall
indicate that it is ready for reading, once connections are available.
A file descriptor for a socket that is connecting asynchronously shall
indicate that it is ready for writing, once a connection has been
established.
RETURN VALUE
Upon successful completion, poll() shall return a non-negative value. A
positive value indicates the total number of file descriptors that have
been selected (that is, file descriptors for which the revents member
is non-zero). A value of 0 indicates that the call timed out and no
file descriptors have been selected. Upon failure, poll() shall return
-1 and set errno to indicate the error.
ERRORS
The poll() function shall fail if:
EAGAIN The allocation of internal data structures failed but a subse‐
quent request may succeed.
EINTR A signal was caught during poll().
EINVAL The nfds argument is greater than {OPEN_MAX}, or one of the
fd members refers to a STREAM or multiplexer that is linked
(directly or indirectly) downstream from a multiplexer.
The following sections are informative.
EXAMPLES
Checking for Events on a Stream
The following example opens a pair of STREAMS devices and then waits
for either one to become writable. This example proceeds as follows:
1. Sets the timeout parameter to 500 milliseconds.
2. Opens the STREAMS devices /dev/dev0 and /dev/dev1, and then polls
them, specifying POLLOUT and POLLWRBAND as the events of interest.
The STREAMS device names /dev/dev0 and /dev/dev1 are only examples of
how STREAMS devices can be named; STREAMS naming conventions may vary
among systems conforming to the IEEE Std 1003.1-2001.
3. Uses the ret variable to determine whether an event has occurred on
either of the two STREAMS. The poll() function is given 500 mil‐
liseconds to wait for an event to occur (if it has not occurred
prior to the poll() call).
4. Checks the returned value of ret. If a positive value is returned,
one of the following can be done:
a. Priority data can be written to the open STREAM on priority
bands greater than 0, because the POLLWRBAND event occurred on
the open STREAM ( fds[0] or fds[1]).
b. Data can be written to the open STREAM on priority-band 0,
because the POLLOUT event occurred on the open STREAM ( fds[0]
or fds[1]).
5. If the returned value is not a positive value, permission to write
data to the open STREAM (on any priority band) is denied.
6. If the POLLHUP event occurs on the open STREAM ( fds[0] or fds[1]),
the device on the open STREAM has disconnected.
#include <stropts.h>
#include <poll.h>
...
struct pollfd fds[2];
int timeout_msecs = 500;
int ret;
int i;
/* Open STREAMS device. */
fds[0].fd = open("/dev/dev0", ...);
fds[1].fd = open("/dev/dev1", ...);
fds[0].events = POLLOUT | POLLWRBAND;
fds[1].events = POLLOUT | POLLWRBAND;
ret = poll(fds, 2, timeout_msecs);
if (ret > 0) {
/* An event on one of the fds has occurred. */
for (i=0; i<2; i++) {
if (fds[i].revents & POLLWRBAND) {
/* Priority data may be written on device number i. */
...
}
if (fds[i].revents & POLLOUT) {
/* Data may be written on device number i. */
...
}
if (fds[i].revents & POLLHUP) {
/* A hangup has occurred on device number i. */
...
}
}
}
APPLICATION USAGE
None.
RATIONALE
None.
FUTURE DIRECTIONS
None.
SEE ALSO
STREAMS , getmsg() , putmsg() , read() , select() , write() , the Base
Definitions volume of IEEE Std 1003.1-2001, <poll.h>, <stropts.h>
COPYRIGHT
Portions of this text are reprinted and reproduced in electronic form
from IEEE Std 1003.1, 2003 Edition, Standard for Information Technology
-- Portable Operating System Interface (POSIX), The Open Group Base
Specifications Issue 6, Copyright (C) 2001-2003 by the Institute of
Electrical and Electronics Engineers, Inc and The Open Group. In the
event of any discrepancy between this version and the original IEEE and
The Open Group Standard, the original IEEE and The Open Group Standard
is the referee document. The original Standard can be obtained online
at http://www.opengroup.org/unix/online.html .
IEEE/The Open Group 2003 POLL(P)
