poll man page on SmartOS

Man page or keyword search:  
man Server   16655 pages
apropos Keyword Search (all sections)
Output format
SmartOS logo
[printable version]

POLL(2)								       POLL(2)

NAME
       poll - input/output multiplexing

SYNOPSIS
       #include <poll.h>

       int poll(struct pollfd fds[], nfds_t nfds, int timeout);

DESCRIPTION
       The  poll()  function provides applications with a mechanism for multi‐
       plexing input/output over a set of file descriptors.  For  each	member
       of the array pointed to by fds, poll() examines the given file descrip‐
       tor for the event(s) specified in events. The number of	pollfd	struc‐
       tures  in the fds array is specified by nfds. The poll() function iden‐
       tifies those file descriptors on which an application can read or write
       data, or on which certain events have occurred.

       The  fds argument specifies the file descriptors to be examined and the
       events of interest for each file descriptor.  It is  a  pointer	to  an
       array  with  one member for each open file descriptor of interest.  The
       array's members are pollfd structures, which contain the following mem‐
       bers:

	 int	 fd;	    /* file descriptor */
	 short	 events;    /* requested events */
	 short	 revents;   /* returned events */

       The  fd	member	specifies  an  open file descriptor and the events and
       revents members are bitmasks constructed by a logical OR	 operation  of
       any combination of the following event flags:

       POLLIN
		     Data  other  than	high priority data may be read without
		     blocking. For streams, this flag is set in	 revents  even
		     if the message is of zero length.

       POLLRDNORM
		     Normal  data (priority band equals 0) may be read without
		     blocking. For streams, this flag is set in	 revents  even
		     if the message is of zero length.

       POLLRDBAND
		     Data  from	 a  non-zero priority band may be read without
		     blocking. For streams, this flag is set in	 revents  even
		     if the message is of zero length.

       POLLPRI
		     High  priority data may be received without blocking. For
		     streams, this flag is set in revents even if the  message
		     is of zero length.

       POLLOUT
		     Normal data (priority band equals 0) may be written with‐
		     out blocking.

       POLLWRNORM
		     The same as  POLLOUT.

       POLLWRBAND
		     Priority data (priority band > 0) may be  written.	  This
		     event  only  examines  bands that have been written to at
		     least once.

       POLLERR
		     An error has occurred on the device or stream.  This flag
		     is	 only  valid in the revents bitmask; it is not used in
		     the events member.

       POLLHUP
		     A hangup has occurred  on	the  stream.  This  event  and
		     POLLOUT  are  mutually  exclusive;	 a stream can never be
		     writable if a hangup has occurred.	 However,  this	 event
		     and   POLLIN,  POLLRDNORM, POLLRDBAND, or POLLPRI are not
		     mutually exclusive.  This	flag  is  only	valid  in  the
		     revents bitmask; it is not used in the events member.

       POLLNVAL
		     The  specified  fd value does not belong to an open file.
		     This flag is only valid in the revents member; it is  not
		     used in the events member.

       If the value fd is less than 0, events is ignored and revents is set to
       0 in that entry on return from  poll().

       The results of the poll() query are stored in the revents member in the
       pollfd structure. Bits are set in the revents bitmask to indicate which
       of the requested events are true. If none are true, none of the	speci‐
       fied  bits  are	set in revents when the poll() call returns. The event
       flags  POLLHUP, POLLERR, and  POLLNVAL are always  set  in  revents  if
       the  conditions	they  indicate are true; this occurs even though these
       flags were not present in events.

       If none of the defined  events  have  occurred  on  any	selected  file
       descriptor,  poll() waits at least timeout milliseconds for an event to
       occur on any of the selected file descriptors. On a computer where mil‐
       lisecond timing accuracy is not available, timeout is rounded up to the
       nearest legal value available on that system. If the value  timeout  is
       0,  poll()  returns immediately. If the value of timeout is  −1, poll()
       blocks until a requested event occurs or until the call is interrupted.
       The  poll()  function  is  not  affected by the O_NDELAY and O_NONBLOCK
       flags.

       The poll() function supports regular files, terminal and	 pseudo-termi‐
       nal  devices,  streams-based  files,  FIFOs and pipes.  The behavior of
       poll() on elements of fds that refer to other types of file is unspeci‐
       fied.

       The poll() function supports sockets.

       A  file	descriptor for a socket that is listening for connections will
       indicate that it is ready for reading, once connections are  available.
       A  file	descriptor for a socket that is connecting asynchronously will
       indicate that it is ready for  writing,	once  a	 connection  has  been
       established.

       Regular files always poll() TRUE for reading and writing.

RETURN VALUES
       Upon  successful	 completion, a non-negative value is returned. A posi‐
       tive value indicates the total number of file descriptors that has been
       selected	 (that	is,  file  descriptors for which the revents member is
       non-zero). A value of 0 indicates that the call timed out and  no  file
       descriptors  have been selected. Upon failure, −1 is returned and errno
       is set to indicate the error.

ERRORS
       The poll() function will fail if:

       EAGAIN
		 Allocation  of	 internal  data	 structures  failed,  but  the
		 request may be attempted again.

       EFAULT
		 Some argument points to an illegal address.

       EINTR
		 A signal was caught during the poll() function.

       EINVAL
		 The  argument	nfds is greater than {OPEN_MAX}, or one of the
		 fd members refers to a stream or multiplexer that  is	linked
		 (directly or indirectly) downstream from a multiplexer.

ATTRIBUTES
       See attributes(5) for descriptions of the following attributes:

       ┌────────────────────┬─────────────────┐
       │  ATTRIBUTE TYPE    │ ATTRIBUTE VALUE │
       ├────────────────────┼─────────────────┤
       │Interface Stability │ Standard	      │
       └────────────────────┴─────────────────┘

SEE ALSO
       Intro(2),   getmsg(2),	getrlimit(2),  putmsg(2),  read(2),  write(2),
       select(3C), attributes(5), standards(5), chpoll(9E)

       STREAMS Programming Guide

NOTES
       Non-STREAMS drivers use	 chpoll(9E)  to	 implement   poll()  on	 these
       devices.

				 Aug 23, 2001			       POLL(2)
[top]

List of man pages available for SmartOS

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net